Airflow & Air Quality - Page 34

Manufacturer: Veris Brand: Veris

Wall Mount CO2 Sensor, 0-2000ppm Measurement Range, Dual Analog Outputs, 0-3/5/10VDC and 4-20mA Output, Relay, 3 Year Warranty

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-117/323 KIT Color: Electrician Multimeter and Clamp Meter Combo Kit

About the Fluke 117/323 KIT Multimeter, 117 Digital Multimeter/323 TrueRMS Clamp Meter Electrician's Combo Meter Kit Fluke 117/323 KIT Fluke Multimeter, 117 Digital Multimeter/323 TrueRMS Clamp Meter Electrician's Combo Meter Kit pairs the Fluke 117 multimeter with a Fluke 323 clamp meter for productive and effective troubleshooting in one total solution, including the new C115 durable soft carrying case for protection and easy meter transportation. Replaces: Fluke 117/322 KIT

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The Series CDTA Communicating Carbon Dioxide Detector combines the function of three room sensors into a single, compact housing. Parameters include carbon dioxide, humidity, temperature, and temperature set point with override. By having field selectable Modbus® and BACnet Communications, only four wires are needed for power and the communication signal. The communicating detectors can be daisy-chained together to further reduce installation cost. In order to reduce the set up time, the RS-485 MAC address is set up using on board dip switches. A second set of dip switches are used to select whether output is Modbus® RTU or BACnet MS/TP communication protocols and to limit access to the set up menu. Like our Series CDT Carbon Dioxide Transmitter, the Series CDTA uses a Single Beam Dual Wavelength Non-Dispersive Infrared (NDIR) sensor to measure the carbon dioxide level. This technology can be used in installations that will be occupied 24 hours per day. For improved accuracy, the transmitter can be field calibrated to the environmental conditions of the installation. Also, the barometric pressure can be programmed to correct for altitude. The humidity uses a capacitive polymer sensor and the temperature is measured using a 10KO thermistor sensor. The humidity sensor is field replaceable without the need for additional calibration. Optional local and remote displays are available to display any of the parameters. For applications in which the building occupants aren't familiar with CO2 concentrations, the LCD can be programmed to display temperature, humidity, or temperature set point instead.

Manufacturer: ACI Brand: ACI

Duct Mount CO Sensor, 0-125 ppm (Standard)/0-250 ppm (Field Adjustable) Meaurement, 4-20mA or 2-10VDC Output, 2-Year Limited Warranty

Manufacturer: Yokogawa Corporation of America Brand: Yokogawa Corporation of America Model: 103131LSTC

Overview:LED Illuminated Versions Available in Red and WhiteAvailable in AC/DC Amps and Volts, AC Watts/VARS/Power Factor/Frequency/Synchroscope, RTD TemperatureTracking: ±11⁄2% DC; ±2% AC; Vertical MountingRepeatability: ±0.5% DC and Rectifier TypeWater-Tight ConstructionShock-Resistant Pivot and Jewel MovementUL and IP54 Splash-Proof Models Available

Manufacturer: Ohaus Brand: Ohaus Model: 80000004

The Harvard Trip balance is carefully engineered to provide the accuracy necessary in comparative weighing.

Manufacturer: Meriam Process Technologies Brand: Meriam Model: ZM200-DI0005

Meriam's M200-DI handheld Smart Manometer for liquids brings high accuracy to wet/wet differential pressure applications. Potentially corrosive or wet gasses are also handled by the M200-DI. Wetted parts are 316L SS with Viton O-rings. The M200-DI features NIST traceable accuracy of ± 0.05 percent FS (± 0.025 percent FS optional) independent of temperature effect from 23 degree to 122 degree F for intrinsically safe models. The accuracy statement is good from -4 degree to 122 degree F for general purpose models. All ranges are rated for 1000 psi common mode pressure. HI side overpressure rating is 3X F.S. while the LO side overpressure rating is 3X F.S. or 150 psi, whichever is less. Optional flushing ports (pending) allow solvent clean-out of P1 and P2 ports or can be used to vent air from the connecting tubing of liquid applications. The display can read in any of 11 pressure units or can be linearly scaled for special user units. A square root flow function allows the M200-DI to display flow in user defined engineer units. The user selectable damping feature minimizes pulsation effects. The Min/Max function captures the extremes of pulsating pressure signals and the Hold function freezes the display for convenient reading if needed. Auto Record documents up to 240 reading for future recall. The M200-DI series can be recalibrated in the field for zero, span, and linearity. The user has the option to select a 1 point or 5 point calibration procedure. Enables users with accurate primary standards to calibrate unit locally if desired. 30 Ounce (6.5" by 3.6" by 2.25") polycarbonate, permanently dissipative, ESD protection. 5 Significant digit LCD (0.25" high), 2 line x 16 alphanumeric characters with contrast adjustment. Two stage backlight with visual over range indication. 1/8" Female NPT, 316L SS, HI and LO ports 5/16 - 24 SAE/MS J1926 flushing ports with 316L SS plugs. Storage temperature: -40 degree F to 140 degree F (-40 degree C to 60 degree C).

Manufacturer: ACI Brand: ACI

Wall Mount Dual Channel CO2 Sensor, 0-2000ppm Measurement Range, 4-20mA / 0-5VDC / 0-10VDC Output, 2-Year Warranty

Manufacturer: Meriam Process Technologies Brand: Meriam Model: Z200DPGS-10

Migration: minor from high to low port. Sensing element: piston. Wetted parts: body material, SS spring, ceramic magnet and seals. Case material: engineered polymer. Dial size: 2.5 (square), 4.5" (round). Mounting: direct, front flange, 2" pipe and surface mounting. Maximum working pressure: 3000 Psig for Aluminum and Brass, 6000 Psig for SS. Maximum process temperature: 200 degree F. Seals: Buna-N. Lens: Plexiglass (acrylic). Connection: 1/4" NPT(F) Std. Porting: In-line. Over range protection: Up to the MAWP from high and low side. Protecting for gauge and switch: NEMA-4X / IP65. Applications includes: Filter monitoring, pump performance, level measurement, Flow, flow direction, pressure monitoring, Flow rate, strainer monitoring, condition monitoring of heating/cooling system, Air filter and collector/bag filter monitoring, collector/bag filter monitoring, blower performance.

Manufacturer: Kanomax Brand: Kanomax Model: 2211-08

Kanomax flow control valve for gas tank.