Stroboscopes - Page 13

Manufacturer: Monarch Instrument Brand: Monarch Instrument Model: 6235-010

The Monarch 6235-010 PLS pocket LED stroboscope has internal and external modes, time delay, phase shift, and a NIST Certificate of Calibration, and provides inspection and speed measurement. It is designed for motion analysis, preventive maintenance, printing inspection, and speed measurement of repetitive motion. The 7-array LED light source has a light output of 1800 lumens at 6000 flashes per minute (FPM) eight inches from the lens. Adjustable flash duration of 0.1 to 18 degrees or 0.5 to 2500 microseconds. LED lights have a longer bulb life and require less energy than xenon flash tubes and can extend the battery life of battery-powered stroboscopes, have a lower heat output, and quieter operation when used in audio testing. The internal flash mode has a range of 30 to 300,000 FPM and 0.5 to 5,000 hertz (Hz) and has an accuracy of 0.005% of setting, or + or - last digit. The external flash mode has a range of 0 to 300,000 FPM, 0 to 5000 Hz and accuracy of + or - 0.005% of reading, or + or - last digit. A NIST Certificate of Calibration ensures accuracy. Built-in multiply-by-2 and divide-by-2 functionality allows the operator to distinguish true RPM from harmonics. Separate 3.5mm (1/8") transistor-transistor logic (TTL) input and output jacks provide power to remote sensors and allow multiple strobes to be daisy-chained to provide wider coverage. Tachometer mode, available for use while the stroboscope is in external mode, has a measuring range of 30 to 300,000 rpm (requires remote sensor, not included). Phase shift of 0.1 to 18 degrees of rotation and time delay of 0.5 to 2500 microseconds allow operator to manually adjust the focal point of the object to any point in the rotation without moving the trigger point. A continuous duty and integrated 1/4" - 20 UNF (Unified Fine) thread mount enables the stroboscope to be used continuously over the life of the battery. Five user-selectable flash rates can be programmed into the device and recalled after powering off. The stroboscope is powered by 3.6V DC interna...

Manufacturer: Monarch Instrument Brand: Monarch Instrument Model: 6235-011

The Monarch 6235-010 PLS pocket LED stroboscope has internal and external modes, time delay, phase shift, and a NIST Certificate of Calibration, and provides inspection and speed measurement. It is designed for motion analysis, preventive maintenance, printing inspection, and speed measurement of repetitive motion. The 7-array LED light source has a light output of 1800 lumens at 6000 flashes per minute (FPM) eight inches from the lens. Adjustable flash duration of 0.1 to 18 degrees or 0.5 to 2500 microseconds. LED lights have a longer bulb life and require less energy than xenon flash tubes and can extend the battery life of battery-powered stroboscopes, have a lower heat output, and quieter operation when used in audio testing. The internal flash mode has a range of 30 to 300,000 FPM and 0.5 to 5,000 hertz (Hz) and has an accuracy of 0.005% of setting, or + or - last digit. The external flash mode has a range of 0 to 300,000 FPM, 0 to 5000 Hz and accuracy of + or - 0.005% of reading, or + or - last digit. A NIST Certificate of Calibration ensures accuracy. Built-in multiply-by-2 and divide-by-2 functionality allows the operator to distinguish true RPM from harmonics. Separate 3.5mm (1/8") transistor-transistor logic (TTL) input and output jacks provide power to remote sensors and allow multiple strobes to be daisy-chained to provide wider coverage. Tachometer mode, available for use while the stroboscope is in external mode, has a measuring range of 30 to 300,000rpm (requires remote sensor, not included). Phase shift of 0.1 to 18 degrees of rotation and time delay of 0.5 to 2500 microseconds allow operator to manually adjust the focal point of the object to any point in the rotation without moving the trigger point. A continuous duty and integrated 1/4" - 20 UNF (Unified Fine) thread mount enables the stroboscope to be used continuously over the life of the battery. Five user-selectable flash rates can be programmed into the device and recalled after powering off. The stroboscope is powered by 3.6V DC internal...

Manufacturer: Shimpo Brand: Shimpo Model: DT-900

The Shimpo DT-900 battery-operated digital stroboscope has a xenon light source, internal and external trigger modes, and phase shift and time delay features. It provides stop-action or slow-motion viewing of moving machinery for visual inspection of covered gear teeth, shafts, print media, and various injector patterns. The xenon flash tube has a 9 to 15 microsecond flash duration to provide crisp images in brightly lit areas. Xenon flash tubes have brighter light output and a shorter flash duration than LED lights. Bright light output is required for quality images in brightly lit areas, and shorter flash durations provide sharper images, especially at high rates of speed. The stroboscope has a range of 40.0 to 12,000 flashes per minute (FPM) and an accuracy of + or - 0.5% FPM, or + or - 0.01% of reading, whichever is greater. The tachometer mode has a speed measurement range of 40 to 59,000 RPM and an accuracy of + or - 0.5% FPM, or + or - 0.01% of reading, whichever is greater. Built-in multiply-by-2 and divide-by-2 functionality allows the operator to distinguish true RPM from harmonics. Phase shift enables the operator to adjust the focal point of the object to any point in the rotation without moving the trigger point. The 8-digit 2-line LCD display eases reading in low lighting. An integrated 1/4" - 20 Unified Coarse (UNC) mounting thread allows the stroboscope to be mounted on a tripod for long-term use. The rechargeable NiMH battery has a life span of 1.24 to 2.5 hours, depending on flash rate and can be removed for recharging using the 120V AC adapter (included). The housing is comprised of impact and oil-resistant polycarbonate for durability. The stroboscope includes a NiMH rechargeable battery, 120V AC charging adapter, and instructions. Stroboscopes are used in a variety of settings including manufacturing, printing, education, and photography. SpecificationsFlash range and accuracy40 to 12,000 FPM, with accuracy + or - 0.5% FPM or + or - 0.01% of reading, whichever is greaterTachometer range and...

Manufacturer: Hoto Instruments Brand: Hoto Instruments Model: ESL-200

Overview ESL-200 is a super bright, battery operated, LED stroboscope designed to measure and observe rotating, reciprocating and linear motion in a variety of production, quality control and academic applications. It generates an extremely bright light relative to its compact size. Digital phase shift adjustment by 1° increments

Manufacturer: Monarch Instrument Brand: Monarch Instrument Model: 6204-012

The Monarch 6204-012 Nova-Strobe dbx battery-powered digital stroboscope with xenon flash tube, internal and external trigger mode, and internal phase shift displays rate in FPM (flashes per minute) or flashes per second (Hz). It is designed for motion analysis, preventive maintenance, printing inspection, harmonics analysis, and speed measurement of repetitive motion. Internal and external trigger modes have a flash rate range of 30 to 20,000 FPM. Internal flash rates can be adjusted in 0.1 step increments using the coarse/fine adjustment knob. A digital microprocessor keeps readings accurate. Built-in multiply-by-2 and divide-by-2 push buttons allow the operator to distinguish actual rpm from harmonic frequencies, and provides stop-motion viewing beyond the 20,000 FPM limit. Tachometer mode measures speed up to 250,000 rpm with external sensor (not included). Separate transistor-transistor logic (TTL) input and output jacks (1/8" phone) provide power to remote sensors and allow multiple strobes to be daisy-chained to provide wider coverage. The xenon flash tube has a 20 to 50 microsecond flash duration to provide crisp images in brightly lit areas. Xenon flash tubes have brighter light output and a shorter flash duration than LED lights. Bright light output is required for quality images in brightly lit areas, and shorter flash durations provide sharper images, especially at high rates of speed. Continuous duty cycle and built-in threaded mount allow the stroboscope to be mounted for long-term use without cool-down periods. Data storage and recall for up to six user-selectable values and last measurement memory are retained even after power-off. The stroboscope is powered by 6V DC internal rechargeable batteries with an operating time of approximately 60 minutes at 6000 FPM. It includes a NIST Certificate of Calibration and a universal charger with USA, U.K., AUS, and EURO wall plugs. Stroboscopes are used in a variety of settings including manufacturing, printing, education, and photography.SpecificationsFlash...

Manufacturer: Monarch Instrument Brand: Monarch Instrument Model: 6232-010

The Monarch 6232-010 PBL battery–operated, portable stroboscope has a 12-array LED light source, internal and external trigger modes, a 30 to 500,000 flashes/revolutions-per-minute (FPM/RPM) range, and a continuous duty cycle to provide stop-motion inspection and speed measurement. It is designed for motion analysis, preventive maintenance, printing inspection, and speed measurement of repetitive motion. The 12-array LED light source has an adjustable flash duration up to 14 degrees or 3000 microseconds and a light output of 3000 lux. LED lights have a longer bulb life and require less energy than xenon flash tubes and can extend the battery life of battery-powered stroboscopes, have a lower heat output, and quieter operation when used in audio testing. The flash rate range of 30 to 500,000 FPM/RPM has an accuracy of 0.002% of setting, or + or - 1 least-significant digit/0.01 FPM. A NIST Certificate of Calibration ensures accuracy. Built-in multiply-by-2 and divide-by-2 functionality allows the operator to distinguish true RPM from harmonics. Separate 3.5mm (1/8") transistor-transistor logic (TTL) input and output jacks provide power to remote sensors and allow multiple strobes to be daisy-chained to provide wider coverage. Tachometer mode, available for use while the stroboscope is in external mode, has a measuring range of 5 to 200,000 rpm and an accuracy of + or - 0.01% or 0.1 rpm (remote sensor not included). External phase shift of 0.1 to 359.9 degrees and time delay range of 0.001 to 1000 milliseconds allow operator to manually adjust the focal point of the object to any point in the rotation without moving the trigger point. Manual internal phase shift allows the operator to view the object at any point in the cycle without moving the trigger point. The stroboscope can be powered by the internal NiMH rechargeable batteries or using the universal 115/230V AC power supply/recharger. The continuous duty cycle and the 115/230V AC power supply allow the stroboscope to be used continuously without the nee...

Manufacturer: Cole-Parmer Brand: Monarch Instrument Model: AO-87701-05

These lightweight, digital stroboscopes make stop-motion measurements quickly and easily—just point, shoot, and adjust flash rate. Adjust the flash rate with digital encoder knob on the side. Last flash rate used is stored in memory, and will display on LCD when strobe is reactivated. For hands-free operation, activate trigger lock, and mount the stroboscope on a tripod. Stroboscopes are available with AC power or rechargeable internal batteries, and as stroboscopes only or stroboscope kits. What's Included: Stroboscope only models include power source (AC adapter or internal battery and recharger). Stroboscope kit models include power source (AC adapter or internal battery and charger), spare lamp, and carrying case. Measure stop-motion quickly and easily Microprocessor ensures measurement accuracy.

Manufacturer: COLE-PARMER Brand: Monarch Instrument

The PalmStrobe x portable stroboscope is the industrial standard for high intensity, multifunction xenon stroboscopes. Memory holds eight commonly used flash patterns and the last flash rate used - no need to recalculate flash rates each time. Memory is retained even when the battery is recharging - recharge battery in or out of strobe. The 6-digit, backlit LCD display is easy to read in both well-lit or dim locations. Additional features include rapid x2 and ÷2 of current flash rate, TTL-compatible input/output, and low-battery indicator. Removable, rechargeable battery pack allows unlimited measuring power Compact, lightweight housing allows for convenient one-handed operation. Four-quadrant tuner makes stop action and slow motion inspections easy

Manufacturer: Cole-Parmer Brand: Monarch Instrument Model: 6210-020

These stroboscopes feature a pistol-grip handle with a latching trigger and a 1/4–20 threaded bushing for extended “hands-free” tripod mounting. High flash energy allows measurements in bright areas. Select standard or phase—shifting models according to your application. Phase-Shifting Stroboscope shifts in .1° increments — view different parts of moving machinery with higher resolution and accuracy. Adjust readings by as little as 0.01 fpm. Store and recall nine full flash rate settings in non-volatile memory—unit remembers last setting before shutoff. Set stroboscope for internal mode or external mode (input signal from TTL to 24 V). External mode features two delay functions—phase angle delay and time delay with resolution to 0.1° and 0.00001 seconds. What’s Included: a 6-ft (1.8-m) power cord (115 VAC models include plug only) (115/230 models include battery recharger), and an NIST-traceable calibration report supplied by the manufacturer. Phase shifting models let you use your stroboscopes continuously View different parts of moving machinery.

Manufacturer: Checkline Brand: Checkline Model: LS-9-LED

The new LS-9-LED is a high-performance stationary LED-stroboscope with powerful light output and uniform light distribution over a large area for use on web-widths up to 500mm (20 inches) and wider. High light outputDue to the use of 120 of the industry's latest high-performance LEDs, the LS-9-LED offers a powerful light intensity. The large, homogenous illumination surface delivers superb results even at difficult light conditions, making the LS-9-LED suitable for a very wide range of measurement, observation and inspection functions. It is especially suitable for demanding applications, such as those in the printing industry. Superb image sharpnessWith an adjustable flash duration from1-1000 ?seconds, you will easily find the best combination between light intensity and sharp images for every application. Flexible adjustments to all applicationsAlternatively, the stroboscope can be controlled directly by the trigger signal of your system without the need for additional control units or by various RT STROBE control devices. When using these trigger options simultaneously, you can easily alternate between the signal inputs by using the switch on the reverse side of the device.