Stroboscopes - Page 14

Manufacturer: Monarch Instrument Brand: Monarch Instrument Model: 6220-033

The Monarch 6220-032 battery or line-powered, vbx portable vibration stroboscope has a xenon flash tube, provides measurements in flashes per minute (FPM) and hertz (Hz) for use in applications requiring balancing, motion analysis, online coupling inspections, and general-purpose phase-shifting. The xenon flash tube has an 8 to 20 microsecond flash duration to provide crisp images in brightly lit areas. Xenon flash tubes have brighter light output and a shorter flash duration than LED lights. Bright light output is required for quality images in brightly lit areas, and shorter flash durations provide sharper images, especially at high rates of speed. The stroboscope has a flash rate range of 30 to 50,000 FPM/0.5 to 830 Hz and an accuracy of + or - 0.002% of reading. A NIST Certificate of Calibration ensures accuracy. Built-in multiply-by-2 and divide-by-2 functionality allows the operator to distinguish true RPM from harmonics. The narrow-bandwidth filter limits the influence of harmonics around the selected frequency, providing a more stable phase reading. Separate 3.5mm (1/8") transistor-transistor logic (TTL) input and output jacks provide power to remote sensors and allow multiple strobes to be daisy-chained to provide wider coverage. Tachometer mode, available for use while the stroboscope is in external mode, has a measuring range of 5 to 200,000 rpm and an accuracy of + or - 0.01% or 0.1 rpm. The phase shift range of 0.1 to 359.9 degrees and time delay range of 0.01 to 1000 milliseconds allow the operator to view the object at any point in the cycle without moving the trigger point. The stroboscope operates on internal rechargeable batteries or is line-powered using the universal 115/230V AC power supply/recharger. The stroboscope stores up to nine user-selectable flash rates, stored in either FPM or Hz. The stroboscope includes a 115/230V AC universal power supply/battery charger, an accelerometer cable, a NIST Certificate of Calibration, a spare xenon lamp, carrying case, and instructions. Stroboscopes a...

Manufacturer: Monarch Instrument Brand: Monarch Instrument Model: 6280-038

6 foot TTL input/output cable, 1/8" stereo phone plug to 1/8" stereo phone plug, Model: CA-4045-6

Manufacturer: Shimpo Brand: Shimpo Model: FT-900

Flash tube replacement. For DT-900 TechStrobe stroboscope. Pack of 1.

Manufacturer: Monarch Instrument Brand: Monarch Instrument Model: 6280-011

115 Volts, 3 Hours Battery Recharger, Stroboscope Charger, For DB Plus Strobe

Manufacturer: Checkline Brand: Checkline

Spare Xenon flash tube for PK2X (different tube then PK1 or PK2).

Manufacturer: Tereninstruments Brand: tereninstruments

We use DHL and Fedex. Generally, it only needs 3 days to arrive America from China. The lead time is about 1-3 business days. Applications: The Stroboscope is capable to provide image of single, two or multiple stillness for the vibration object, rapidly rolling object or a periodic motion object,and can also use to observe the movement tracks. features: Use microcomputer technology, emerging technologies, anti-jamming technique and other advanced technology, it can measure the rotative velocity without contacting the object. Display: 5 Digits 10 mm LCD Measurement Range: D: 50 ~ 30,000 FPM Accuracy: +- (0.05% n + 1 d) Resolution: 0.1 FPM (50 ~ 999.9 FPM) ; 1 FPM (Over 1000 FPM) Sampling Time: 0.3 Seconds External Trigger Level: 3 ~ 24 V H / L Range: Flashing Light is much Brighter at Low Range than at High Range Flash Tube Life: 100 Million Times Regular Operating Conditions: No Corrosive Gas and Electromagnetic Fields Operating Conditions: Temperature: 0 ~ 40 Degree; Humidity: less than 85%RH Power Supply: AC 220 V (Optional AC 110 V) Power Consumption: About 50 W Dimensions: 215 x 85 x 180 mm Weight: About 1000 g Package includes: 1* Main Unit 1* Carrying Case (B08) 1* Operation Manual

Manufacturer: LUTRON Brand: Reed Instruments Model: K4030-230V-NIST

The REED 230V Stroboscope allows you to freeze the motion and measure the speed of a rotating object, without contact. There is a push button that doubles and one that divides in half the flashing and display rate with just one activation. There is also a coarse and fine adjustment button to synchronize flash to exactly the right rate.

Manufacturer: Monarch Instrument Brand: Monarch Instrument Model: 6203-010

The Monarch 6203-010 Nova-Strobe dax 115V AC digital stroboscope with xenon flash tube, internal and external trigger mode, and internal phase shift displays rate in flashes per minute (FPM) or flashes per second (Hz). It is designed for motion analysis, preventive maintenance, printing inspection, harmonics analysis, and speed measurement of repetitive motion. Internal and external trigger modes have a flash rate range of 30 to 20,000 FPM. Internal flash rates can be adjusted in 0.1 step increments using the coarse/fine adjustment knob. A digital microprocessor keeps readings accurate. Built-in multiply-by-2 and divide-by-2 push buttons allow the operator to distinguish actual rpm from harmonic frequencies, and provides stop-motion viewing beyond the 20,000 FPM limit. Tachometer mode measures speed up to 250,000 rpm with external sensor (not included). Separate transistor-transistor logic (TTL) input and output jacks (1/8" phone) provide power to remote sensors and allow multiple strobes to be daisy-chained to provide wider coverage. The xenon flash tube has a 20 to 50 microsecond flash duration to provide crisp images in brightly lit areas. Xenon flash tubes have brighter light output and a shorter flash duration than LED lights. Bright light output is required for quality images in brightly lit areas, and shorter flash durations provide sharper images, especially at high rates of speed. Continuous duty cycle and built-in threaded mount allow the stroboscope to be mounted for long-term use without cool-down periods. Data storage and recall for up to six user-selectable values and last measurement memory are retained even after power-off. The stroboscope includes a NIST Certificate of Calibration. Stroboscopes are used in a variety of settings including manufacturing, printing, education, and photography.SpecificationsUnitsFPM, HzFlash rate range30 to 20,000 FPMTachometer range5 to 250,000 RPM, + or - 0.001% of reading (requires external sensor, not included)Flash rate resolution0.01 to 1 FPM (menu selectable...

Manufacturer: SHIMPO Brand: Shimpo Model: ST-328-IC-1-230V

The st-328 is a permanent mount stroboscope array utilizing bright high powered Xenon Style lamps. The st-328’s Xenon light array provides a bright, stable strobe light over a wide measurement range. The st-328 arrays are available in several standard sizes from 10” (260 mm) to 71” (1800 mm) in length. Custom sizes are available upon request. The arrays are easily mountable on production equipment. An optional mounting adapter Kit is available to aid in array installation. An integral or remote control enclosure is available to program the unit. If selecting the separate, external control enclosure, communication is via a 9.8’ (3 M) connecting cable. Operation is simple with the 6 button keypad and large, LED display. Flash rate is quickly adjustable via the control dial. The unit can work off user programmed flash frequency or from a remote sensor’s signal which will automatically adjust to corresponding process fluctuations. The st-328 is designed for speed and frequency measurements in the printing, packaging, textile, automotive, cable, mining, steel, chemical, optical, medical and shipbuilding industries in various applications.

Manufacturer: SHIMPO Brand: Shimpo Model: ST-328-RC-1

The st-328 is a permanent mount stroboscope array utilizing bright high powered Xenon Style lamps. The st-328’s Xenon light array provides a bright, stable strobe light over a wide measurement range. The st-328 arrays are available in several standard sizes from 10” (260 mm) to 71” (1800 mm) in length. Custom sizes are available upon request. The arrays are easily mountable on production equipment. An optional mounting adapter Kit is available to aid in array installation. An integral or remote control enclosure is available to program the unit. If selecting the separate, external control enclosure, communication is via a 9.8’ (3 M) connecting cable. Operation is simple with the 6 button keypad and large, LED display. Flash rate is quickly adjustable via the control dial. The unit can work off user programmed flash frequency or from a remote sensor’s signal which will automatically adjust to corresponding process fluctuations. The st-328 is designed for speed and frequency measurements in the printing, packaging, textile, automotive, cable, mining, steel, chemical, optical, medical and shipbuilding industries in various applications.