Stroboscopes - Page 17

Manufacturer: Monarch Instrument Brand: Monarch Instrument Model: 6280-083

MVS 115 and MVS 230 replacement xenon lamp

Manufacturer: Shimpo Brand: Shimpo Model: DT-725-230V

The Shimpo DT-725-230V battery-powered digital stroboscope has a xenon flash tube, internal and external trigger modes and a continuous duty cycle. It is designed for motion analysis, preventive maintenance, printing inspection, harmonics analysis, and speed measurement of repetitive motion. The xenon flash tube has a 10 to 15 microsecond flash duration to provide crisp images in brightly lit areas. Xenon flash tubes have brighter light output and a shorter flash duration than LED lights. Bright light output is required for quality images in brightly lit areas, and shorter flash durations provide sharper images, especially at high rates of speed. The stroboscope has a 40.0 to 12,500 flashes per minute (FPM) range and an accuracy of + or - 0.02% of reading. Built-in multiply-by-2 and divide-by-2 functionality allows the operator to distinguish true RPM from harmonics. Internal mode phase shift has a 360 degree range in six seconds. Phase shift enables the operator to adjust the focal point of the object to any point in the rotation without moving the trigger point. Synchronous output enables the stroboscope to drive other strobes for wider coverage. The 5-digit, 8mm tall LED display eases reading in low lighting. An integrated 1/4" - 20 Unified Coarse (UNC) mounting thread and continuous duty cycle provide permanent installation and long-term use without the need for cool-down periods. The high-impact plastic housing provides durability. The stroboscope includes a 230V AC adapter and instructions. Stroboscopes are used in a variety of settings including manufacturing, printing, education, and photography. SpecificationsFlash range and accuracy40.0 to 12,500 FPM, with + or - 0.02% of reading accuracyResolution0.1 FPM at 40.0 to 4,999.9 FPM 0.2 FPM at 5,000 to 7,999.9 FPM0.5 FPM at 8,000 to 9,999.5 FPM1 FPM at 10,000 to 12,000 FPMRate multiplier/dividerMultiply-by-2 and divide-by-2Phase shiftPush buttons shift 360 degrees in 6 secondsLight source10W xenon flash tube with 100-million flash life spanFlash du...

Manufacturer: Checkline Brand: Checkline Model: DT-725

Flash Range: 40-12,500 RPM/FPM The DT-725 Digital Stroboscope is a highly stable, industrial-quality instrument for non-contact RPM measurement as well as for inspection and observation of moving parts by "freezing" or "slowing down" the action.

Manufacturer: COLE-PARMER Brand: Monarch Instrument

Stroboscopes remotely measure the speed of moving machinery. You can measure RPMs from a safe distance and limit your risk. If you want to check the performance of difficult-to-reach equipment, use a stroboscope. Even better, many stroboscopes are able to slow down or freeze reciprocating or rotating machinery so you can visually inspect it. Inspections can save you time and expense by revealing when equipment is operating less efficiently. A stroboscope also can be useful for checking pump operation, propeller performance, gear movements, industrial fan speeds, oil leaks, and more. Tachometers or laser tachometers come in contact, noncontact, and dual-style formats. Those using laser beam detection enable precise RPM measurement. Some include contact adaptors for taking both contact and noncontact measurements. For hard-to-reach measurements or those in difficult areas, use a noncontact tachometer. Tachometers are microprocessor-based with limited memory capabilities. Combination meters (tachometer/stroboscopes) are also available for two-in-one meter features. These units can measure rpm and speed and conduct motion analysis. To harness the advantages of both meters-and expand your application usage-these dual-function models may be your solution. This pocket LED stroboscope is a compact, rugged, lightweight device that provides a super bright, uniform light output for performing visual diagnostic inspection and rpm measurements. The silent cool running LEDs are extremely energy efficient, providing up to five hours of operation on a single charge. Additional features include external input for remote triggering or tachometer mode, pulse output, memory for up to five preset flash rates, and tachometer mode for speed measurements up to 250,000 rpm using optional remote sensors and TTL pulse output. What's Included: Universal recharger 115 to 230 VAC, interchangeable wall plugs, NIST-traceable document provided by the manufacturer. Model PLS-Kit also inc

Manufacturer: Monarch Instrument Brand: Monarch Instrument Model: 6203-012

The Monarch 6203-012 Nova-Strobe dax 230V AC digital stroboscope with xenon flash tube, internal and external trigger mode, and internal phase shift displays rate in flashes per minute (FPM) or flashes per second (Hz). It is designed for motion analysis, preventive maintenance, printing inspection, harmonics analysis, and speed measurement of repetitive motion. Internal and external trigger modes have a flash rate range of 30 to 20,000 FPM. Internal flash rates can be adjusted in 0.1 step increments using the coarse/fine adjustment knob. A digital microprocessor keeps readings accurate. Built-in multiply-by-2 and divide-by-2 push buttons allow the operator to distinguish actual rpm from harmonic frequencies, and provides stop-motion viewing beyond the 20,000 FPM limit. Tachometer mode measures speed up to 250,000 rpm with external sensor (not included). Separate transistor-transistor logic (TTL) input and output jacks (1/8" phone) provide power to remote sensors and allow multiple strobes to be daisy-chained to provide wider coverage. The xenon flash tube has a 20 to 50 microsecond flash duration to provide crisp images in brightly lit areas. Xenon flash tubes have brighter light output and a shorter flash duration than LED lights. Bright light output is required for quality images in brightly lit areas, and shorter flash durations provide sharper images, especially at high rates of speed. Continuous duty cycle and built-in threaded mount allow the stroboscope to be mounted for long-term use without cool-down periods. Data storage and recall for up to six user-selectable values and last measurement memory are retained even after power-off. The stroboscope includes a NIST Certificate of Calibration. Stroboscopes are used in a variety of settings including manufacturing, printing, education, and photography.SpecificationsFlash rate range30 to 20,000 FPMTachometer range5 to 250,000 RPM, + or - 0.001% of readingFlash rate unitsFPM, HzFlash rate resolution0.01 to 1 FPM (menu selectable), 0.1 FPM max resolution above ...

Manufacturer: Checkline Brand: Checkline

The PK2X-AC-OT AC Powered Portable Stroboscope With Optional Frequency Output, Flash Range: Range 30 - 12,500 RPM/FPM, Flash Brightness: 1200 Lux is a convenient and accurate device to perform non-contact RPM measurements on rotating or reciprocating parts or components as well as a proven means for inspection of moving parts/machinery by freezing or slowing down the action. This stroboscopic effect is accomplished by matching the flash rate of the stroboscope with the repetitive rate (RPM) of motion of the target. A slow motion effect is accomplished with a slight mismatch of the relative speeds. The PK2X-AC-OT AC Powered Portable Stroboscope With Optional Frequency Output, Flash Range: Range 30 - 12,500 RPM/FPM, Flash Brightness: 1200 Lux is powered directly from an AC power source allowing for continuous use. It small size, lightweight design makes it perfect for use by field technicians or maintenance personnel. The PK2X-AC Portable Stroboscope offer significant improvements from the previous generation model PK2 including a 50% improvement in flash brightness.This new model continues to offer the highest reliability, refined by over 10-years of continuous design & manufacturing improvements since the introduction of the original Pocket Strobe Model PK1 was introduced in 1996. The PK2X-AC requires only one hand to operate, yet delivers performance comparable to much larger and heavier pistol-grip type models. It is ideal for industrial, laboratory, R&D and academic environments. Its small size and excellent performance provide superior convenience and value at a reasonable price.

Manufacturer: Monarch Instrument Brand: Monarch Instrument Model: 6203-011

The Monarch 6203-011 Nova-Strobe dax115V AC digital stroboscope with xenon flash tube, internal and external trigger mode, and internal phase shift displays rate in flashes per minute (FPM) or flashes per second (Hz). It is designed for motion analysis, preventive maintenance, printing inspection, harmonics analysis, and speed measurement of repetitive motion. Internal and external trigger modes have a flash rate range of 30 to 20,000 FPM. Internal flash rates can be adjusted in 0.1 step increments using the coarse/fine adjustment knob. A digital microprocessor keeps readings accurate. Built-in multiply-by-2 and divide-by-2 push buttons allow the operator to distinguish actual rpm from harmonic frequencies, and provides stop-motion viewing beyond the 20,000 FPM limit. Tachometer mode measures speed up to 250,000 rpm with external sensor (not included). Separate transistor-transistor logic (TTL) input and output jacks (1/8" phone) provide power to remote sensors and allow multiple strobes to be daisy-chained to provide wider coverage. The xenon flash tube has a 20 to 50 microsecond flash duration to provide crisp images in brightly lit areas. Xenon flash tubes have brighter light output and a shorter flash duration than LED lights. Bright light output is required for quality images in brightly lit areas, and shorter flash durations provide sharper images, especially at high rates of speed. Continuous duty cycle and built-in threaded mount allow the stroboscope to be mounted for long-term use without cool-down periods. Data storage and recall for up to six user-selectable values and last measurement memory are retained even after power-off. The stroboscope includes a NIST Certificate of Calibration, a spare lamp, and a fitted carrying case. Stroboscopes are used in a variety of settings including manufacturing, printing, education, and photography.SpecificationsUnitsFPM, HzFlash rate range30 to 20,000 FPMTachometer range5 to 250,000 RPM, + or - 0.001% of reading (requires external sensor, not included)Flash rate r...

Manufacturer: Monarch Instrument Brand: Monarch Instrument Model: 6204-013

The Monarch 6204-013 Nova-Strobe dbx battery powered digital stroboscope with xenon flash tube, internal and external trigger mode, and internal phase shift displays rate in flashes per minute (FPM) or flashes per second (Hz). It is designed for motion analysis, preventive maintenance, printing inspection, harmonics analysis, and speed measurement of repetitive motion. Internal and external trigger modes have a flash rate range of 30 to 20,000 FPM. Internal flash rates can be adjusted in 0.1 step increments using the coarse/fine adjustment knob. A digital microprocessor keeps readings accurate. Built-in multiply-by-2 and divide-by-2 push buttons allow the operator to distinguish actual rpm from harmonic frequencies, and provides stop-motion viewing beyond the 20,000 FPM limit. Tachometer mode measures speed up to 250,000 rpm with external sensor (not included). Separate transistor-transistor logic (TTL) input and output jacks (1/8" phone) provide power to remote sensors and allow multiple strobes to be daisy-chained to provide wider coverage. The xenon flash tube has a 20 to 50 microsecond flash duration to provide crisp images in brightly lit areas. Xenon flash tubes have brighter light output and a shorter flash duration than LED lights. Bright light output is required for quality images in brightly lit areas, and shorter flash durations provide sharper images, especially at high rates of speed. Continuous duty cycle and built-in threaded mount allow the stroboscope to be mounted for long-term use without cool-down periods. Data storage and recall for up to six user-selectable values and last measurement memory are retained even after power-off. The stroboscope is powered by 6V DC internal rechargeable batteries with an operating time of approximately 60 minutes at 6000 FPM. It includes a NIST Certificate of Calibration and a universal charger with USA, U.K., AUS, and EURO wall plugs, a spare lamp, and a fitted carrying case. Stroboscopes are used in a variety of settings including manufacturing, printing, edu...

Manufacturer: SHIMPO Brand: Shimpo Model: ST-328-RC-2

The st-328 is a permanent mount stroboscope array utilizing bright high powered Xenon Style lamps. The st-328’s Xenon light array provides a bright, stable strobe light over a wide measurement range. The st-328 arrays are available in several standard sizes from 10” (260 mm) to 71” (1800 mm) in length. Custom sizes are available upon request. The arrays are easily mountable on production equipment. An optional mounting adapter Kit is available to aid in array installation. An integral or remote control enclosure is available to program the unit. If selecting the separate, external control enclosure, communication is via a 9.8’ (3 M) connecting cable. Operation is simple with the 6 button keypad and large, LED display. Flash rate is quickly adjustable via the control dial. The unit can work off user programmed flash frequency or from a remote sensor’s signal which will automatically adjust to corresponding process fluctuations. The st-328 is designed for speed and frequency measurements in the printing, packaging, textile, automotive, cable, mining, steel, chemical, optical, medical and shipbuilding industries in various applications.

Manufacturer: COLE-PARMER Brand: Shimpo

The TechStrobe is the perfect tool for slow motion or stop action stroboscopic inspection. It is the only palm size unit to include a Phase shift feature. Phase shifting allows the TechStrobe operator to advance or retard the flash timing by degrees of angle, without changing the actual flash rate (FPM) of the TechStrobe. FEATURES Brightest flash of any strobe in its' class Long run per charge time User adjustable flash rates Buttons for eash x2 and ÷ adjustment Phase shift mode for full inspection of gears and rolls Alphanumeric LCD display with easy user interface One hand operation for right or left handed operators Removable battery with built-in charge electronics External trigger and clock output Includes AC adapter and extra flashtube TechStrobe kits include free padded belt holster