Pressure Gauges - Page 22

Manufacturer: Parker Brand: Parker Model: 07R413AC

90 scfm at 100 psi inlet pressure with 90 psig no flow secondary setting and 10 psig pressure drop.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 2300-30CM

Select the Magnehelic gage for high accuracy--guaranteed within 2% of full scale--and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too.

Manufacturer: PIC Gauges Brand: PIC Gauges Model: 701DDS-252D

700 Series Gauge Line Is A High Quality Line Of Plastic Case Liquid Filled Gauges. The glycerin filling which helps dampen the effects of pulsation and vibration, while perpetually lubricating the movement (and keeping contaminates such as dirt away from all moving parts) which extends the life of the gauge

Manufacturer: Ashcroft Brand: Ashcroft

Gauge is ideal for use where ambient corrosion is a concern. Designed with stainless steel case and ring that offers excellent resistance to chemical, weather, and corrosion attack. Features 4-1/2" dial for differential low-pressure applications. This listing is for each. Technical Specification Differential Pressure Gauge Type Differential Pressure Gauge Item Differential Pressure Gauge Gauge Nominal Dial Size 5 Basic Gauge Case Material Plastic Basic Gauge Wetted Parts PTFE / Buna-N Differential Gauge Connection Type FNPT Differential Gauge Connection Size 1/8 Gauge Connection Location Back and Side Differential Pressure Range Units In. H2O Differential Pressure Range Value 0 to 6 Gauge Accuracy +/-3.00% Body Material Glass Filled Nylon Gauge Primary Range Smallest Graduation 0.2 Diaphragm Material Buna-N Piston Material PTFE Seal Material Buna-N Gauge Operating Temp. Range 0 Degrees to 140 Degrees F Rated Total Pressure 35 psi Dial Material Stainless steel Scale Type Pressure Includes Instructions Manufacturers Warranty Length 5 yr.

Manufacturer: Enerpac Brand: Enerpac Model: G2537R Color: Silver

This Enerpac G2537R pressure gauge with 2-1/2"-dia. face displays a dual scale of 0 to 10,000 psi (pounds per square inch) and 0 to 700 bar to measure and help monitor pressure within a hydraulic system. It has a center-rear connection with 1/4" National Pipe Taper Fuel (NPTF) male threads. Glycerin is sealed into the gauge to provide more stable readings and better visibility than dry gauges. The safety blowout disk provides a place of failure in case of over pressurization to help protect the rest of the gauge. Accuracy is +/-1.5%.Enerpac manufactures high-pressure tools and equipment for industrial applications. The company, founded in 1910, is headquartered in Menomonee Falls, WI.

Manufacturer: Fluke Corporation Brand: Fluke Model: FVF-BASIC

FlukeView Forms Basic can be used alone to download measurement data and create reports that can be saved and printed. FlukeView Forms comes with an array of standard analysis and reporting forms that get you started on displaying your data in tables, graphs or helpful diagrams. You can leave notes on the forms to draw attention to a particular event. Share or store your data with co-workers or clients - print forms, export to other software programs, or have co-workers and clients down load the free FlukeView Demo/Reader to view and interact with your captured data. To address the increasing demands for reporting and documentation. It increases the power of your Fluke tool by enabling you to document, store and analyze individual readings or series of measurements, then convert them into professional-looking documents. The ability of FlukeView Forms to support multiple instruments enables the user to install and learn only one software application in order to use these multiple tools fully. Owners of Fluke 280 series, 180 series, 789 and 1550B, who do not need the full power of FlukeView forms, can use FlukeView Basic version. Transfer data points from your meter to your PC and use the two standard, non-customizable forms to display your readings in table or graphical form. For a larger array of forms or to use FlukeView Forms Designer to customize your forms, upgrade to FlukeView Forms version 3.3 with FVF-UG (sold separately). Comes with USB/IR cable. Number of standard forms: 2. Number of multiple meters whose data can be viewed simultaneously: 1. Number of concurrently running instances of FlukeView Forms allowed: 1. Requirements: Operating system: Windows 2000, Windows XP, Windows Vista or Windows 7. Minimum PC Hardware: Pentium class or better microprocessor, 32 MB RAM, 70 MB hard disk space (100 MB to install), USB port. FlukeView Forms supports the following test tools: 280 Series, 789, 1550B, 1653, 180 Series. Size: 203 x 100 x 50mm.

Manufacturer: Winters Brand: Winters

PPC Standard Process Gauges are used where operator safety is a must. Applications are suited for the chemical and petroleum industry where chemical compatibility and contamination is a concern. PPC Add-On Options Features: StabiliZR"¢ dampened movement minimizes effects of pulsation and vibration without liquid filling Solid phenolic front and polypropylene pressure relief back safety case ±0.5% accuracy Stainless steel full rotary movement Micrometer pointer for ease in calibration Under and overload stops 316L stainless steel or brass wetted parts standard Restrictor screws standard on dual scale (optional on single scale gauges) ASME B40.100 compliant RoHS compliant (SS and Monel internals only) CRN registered 5 year warranty Made in Canada

Manufacturer: Winters Brand: Winters

PPC Standard Process Gauges are used where operator safety is a must. Applications are suited for process, chemical and petroleum industries especially with highly corrosive media. PPC Add-On Options Features: Solid phenolic front and polypropylene pressure relief back safety case Field liquid-fillable (bottom|Connection only) ±0.5% accuracy Stainless steel full rotary movement for longer life Micrometer pointer for ease in calibration Under and overload stops 316L stainless steel, brass or Monel wetted parts Restricted orifice standard on dual scale (optional on single scale) ASME B40.100 compliant RoHS compliant (SS and Monel internals only) CRN registered 5 year warranty Made in Canada

Manufacturer: Winters Brand: Winters

PPC Standard Process Gauges are used where operator safety is a must. Applications are suited for process, chemical and petroleum industries especially with highly corrosive media. PPC Add-On Options Features: Solid phenolic front and polypropylene pressure relief back safety case Field liquid-fillable (bottom|Connection only) ±0.5% accuracy Stainless steel full rotary movement for longer life Micrometer pointer for ease in calibration Under and overload stops 316L stainless steel, brass or Monel wetted parts Restricted orifice standard on dual scale (optional on single scale) ASME B40.100 compliant RoHS compliant (SS and Monel internals only) CRN registered 5 year warranty Made in Canada

Manufacturer: Winters Brand: Winters

PPC Standard Process Gauges are used where operator safety is a must. Applications are suited for process, chemical and petroleum industries especially with highly corrosive media. PPC Add-On Options Features: Solid phenolic front and polypropylene pressure relief back safety case Field liquid-fillable (bottom|Connection only) ±0.5% accuracy Stainless steel full rotary movement for longer life Micrometer pointer for ease in calibration Under and overload stops 316L stainless steel, brass or Monel wetted parts Restricted orifice standard on dual scale (optional on single scale) ASME B40.100 compliant RoHS compliant (SS and Monel internals only) CRN registered 5 year warranty Made in Canada