Pressure Gauges - Page 28

Manufacturer: Fluke Corporation Brand: Fluke Model: TP2

One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals. Hard stainless steel probe tips. 2mm diameter tip for electronics work. Also compatible with AC72 CAT IV 600V, CAT III 1000V, 10 A rating. UL listed. 1 Year warranty.

Manufacturer: Winters Brand: Winters Model: PFQ804R1

The Winters PFQ series pressure gauge with brass wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The OT58 brass wetted parts are for measuring non-corrosive liquid and gas pressure. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi scale or a dual scale of psi/kPa, psi/bar, Hg. vacuum/kPa, or Hg. vacuum/bar. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection comes with a 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is OT59 brass, and the welding is silver alloy. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges ca...

Manufacturer: Fluke Corporation Brand: Fluke Model: TL175 Color: Black/Red

Twist Guard test leads offer adjustable length test tips for use in different measurement environments. Includes removable 4mm lantern tips that thread onto the lead tip. Fluke TL175 are the only test leads as tough as your meter. Patented TwistGuard extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements. New WearGuard lead wire wear indication. Each test lead is covered by two layers of silicone insulation; inner contrasting color is exposed when the leads are nicked, scuffed, or otherwise damaged and in need of replacement. Double Insulated Silicone leads. TL175 test leads withstand high temperatures and remain flexible in cold temperatures. Extra-heavy duty strain relief on both probe-end and plug-end, tested beyond 30,000 bends without failure. Universal input plugs are compatible with all instruments that accept standard 4mm shrouded banana plugs. Probes always show correct category rating for tip being used. Exposed probe tip length: 19mm to 4mm (0.75" to 0.16"). Ratings: CAT II 1000V, CAT III 1000V, CAT IV 600V, 10A maximum, Pollution Degree 2. Environmental ratings: -20 to 55 degree C (-4 to 131 degree F), altitude: 2000m (6,562'). Conforms to EN61010-031. 1 year warranty.

Manufacturer: PneumaticPlus Brand: PneumaticPlus Model: SAR3000T-N03BG Color: Ivory, Gray

T type to unlock, unscrew the nut attached to the regulating handle. To lock the handle, screw the nut after setting pressure. When regulating pressure, turning the handle to the right raises the pressure of secondary side. Turning to the opposite(left) direction drops the pressure. Regulating pressure range of the secondary side is less than 85% of the first side.

Manufacturer: Winters Brand: Winters Model: PFQ2278

The Winters PFQ series pressure gauge with stainless steel wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The stainless steel wetted parts provide corrosion resistance. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi or Hg. vacuum scale or a dual scale of psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection is 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is stainless steel, and the welding is tungsten inert gas (TIG) for strength. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can ra...

Manufacturer: Winters Brand: Winters Model: PFP824R1

The Winters PFP series pressure gauge with stainless steel 316 wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case and a 1/4" NPT male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1% or 1.5%. The stainless steel 316 wetted parts provide corrosion resistance. The socket for the 2.5" and 4" gauges is one-piece welded for strength. The stainless steel 304 case is corrosion resistant and Ingress Protection certified IP66 for protection against solid objects, including dust or liquids, and is appropriate for outdoor and severe ambient and process conditions. The circular dial comes in 2.5" (63 mm), 4" (100 mm), and 6" (150 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer, and the lens is polycarbonate for high impact resistance. The pointer for the 4" and 6" gauges is micrometer adjustable for ease of calibration. The gauge measures pressure with either a single scale in psi or Hg. vacuum, or a dual scale of either psi/kPa or Hg. vacuum/kPa. The 2.5" gauge is accurate to + or - 1.5% of full scale value. The 4" and 6" gauge are accurate to + or - 1% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade 1A accuracy class. The male connection has a 1/4" NPT (National Pipe Thread) rate and comes with a bottom, lower back, or center back mount. The bourdon tube is drawn seamless stainless steel 316 for additional strength, the movement is stainless steel 304, and the welding is tungsten inert gas (TIG) for strength. The socket gasket, fill plug, and lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 30% for pressures up to 600 psi (4,147 kPa) and 15% for pressures over 600 psi (4,147 kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). ...

Manufacturer: Fluke Corporation Brand: Fluke Model: TP81

Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire. You control needle depth to minimize insulation damage. Essential for use under hood or under dash. Use it on fuel injectors or sensors while providing complete insulation to grounding due to design. The TP81 connects to banana jack leads. Banana jack accepts all DMM and banana jack leads. Non-rotating banana jack prevents leads from tangling, allowing you to tighten/loosen clamp while still connected to the test lead. For use with test leads with 4mm banana plugs. Tested to 60V DC.

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 9694026

The WIKA industrial pressure gauge has copper alloy wetted parts, which resist corrosion against salty liquids, and a circular dial that is enclosed in a stainless steel case that resists corrosion against most samples. The gauge measures pressure from 15 pounds per square inch (psi) to 15,000 psi. It is accurate to + or - 1 percent of span over the entire range of the gauge, or American Society for Mechanical Engineering (ASME) B40.100 Grade 1A accuracy class; or + or - 2/1/2 percent of span over the entire range of the gauge, or ASME Grade A accuracy class. The male connection is available as a lower mount, a lower back mount, or a center back mount, and comes with a choice of a 1/8", 1/4", or 1/2" National Pipe Thread (NPT) rate. This pressure gauge is suitable for gaseous or liquid samples, including those found in hydraulics and compressors in the process industry.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure across a given range.WIKA Instrument Corporation is a globa...

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 2005D

Select the Magnehelic gage for high accuracy--guaranteed within 2% of full scale--and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too.

Manufacturer: Fluke Brand: Fluke Model: FLUKE-IR3000FC

Available for sale in the United States and Canada only See, save, and share data wirelessly — saving time and increasing productivity Increase productivity by communicating wirelessly between your phone, PC, and Fluke test tools Download the Fluke Connect™ app for use with iOS (4s and later) and Android™ to connect with over twenty Fluke test tools (Download iOS app at the App Store, and the Android app from Google play) Logging function on modules allow you to isolate intermittent events or record signal fluctuations remotely Share data with associates in seconds, allowing for immediate interpretation and action Increase efficiency by simultaneously viewing multiple measurements on one screen Take measurements from safe locations reducing potential hazards