Pressure Gauges - Page 62

Manufacturer: Fluke Brand: Fluke Model: FLK-A3000 FC KIT

Fluke a3000 FC Wireless AC Current Clamp Module A fully functional true-rms current clamp meter that wirelessly relays measurements to other Fluke ConnectTM enabled master units, listed below. Fluke 3000 FC DMM Fluke Ti200/300/400 Infrared Camera PC via optional pc3000 FC Adapter Fluke Connect Mobile app Fluke Connect See it. Save it. Share it. All the facts, right in the field. Smart phone not included with purchase. Fluke Connect with ShareLive is the only wireless measurement system that lets you stay in contact with your entire team without leaving the field. The Fluke Connect mobile app is available for Android (4.3 and up) and iOS (4s and later) and works with over 20 different Fluke products-the largest suite of connected test tools in the world. And more are on the way. Go to the Fluke website to find out more. Make the best decisions faster than ever before by viewing all temperature, mechanical, electrical and vibration measurements for each equipment asset in one place.  Get started saving time and increasing your productivity.     Fluke 3000 FC Series Wireless Multimeter   Start building tomorrow's test tool system today with the Fluke 3000 FC Digital Multimeter. The new Fluke Connect system of test tools communicates with the new Fluke Connect mobile app on your AndroidTM or iOS smart device, allowing you to share live measurements, monitor readings from safe distances, and get your job done easier than ever before. The wireless digital multimeter functions as the mobile hub, displaying readings from up to three module tools simultaneously from up to 20 meters away. The Fluke Connect modules also give you the flexibility to build your wireless test tool system how you want when you want. The Fluke 3000 FC Wireless Test Tools are a team and the modules are team players

Manufacturer: Flotec Brand: Flotec Model: TC2104-P2

About the Flotec TC2104 Pressure Gauge for Jet/SubmersibleWell and Sprinkler Pumps, 0100 PSI The Flotec TC2104 is a highperformance and highquality tool that allows you to monitor the performance of your jet or submersible well pumps. This pressure control gauge features clearly marked PSI indicators that will tell you just how your pumps are doing at any given time. The product fits easily into frac14;rdquo; female national pipe thread (FNPT) and can be easily installed for your convenience. Flotec products are made to last and the Flotec TC2104 is no different. Easy to install and easy to use, yoursquo;ll enjoy having this pressure gauge around for a long time to come thanks to the tough materials itrsquo;s made from. Itrsquo;s important to keep track of your jet or submersible pump to ensure good performance and to stay on track for tuneups and replacement needs. The Flotec TC2104 will make your work easier by giving you a clear and concise reading of what your pump is doing at all times.

Manufacturer: Winters Brand: Winters Model: PEM1428

The Winters PEM series pressure gauge with brass wetted parts has a circular dial enclosed in a steel case and a male connection, and measures pressure with a dual scale (psi/kPa)/(Hg. vacuum/kPa) with an accuracy of + or - 3/2/3%. The brass wetted parts are for measuring non-corrosive liquid and gas pressure. The black-painted steel case is Ingress Protection certified IP52 for protection against dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), and 4" (100 mm) diameters. The dial has an aluminum black pointer. The lens for the 1.5", 2", and 2.5"diameter dials is polycarbonate for high impact resistance. The lens for the 4" diameter dial is glass for strength and clarity. The gauge measures pressure with a dual scale of either psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 3/2/3% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade B accuracy class. The male connection is mounted on the bottom or center back of the gauge and has either a 1/4" NPT (National Pipe Thread) or 1/2" NPT rate. The bourdon tube is phosphor bronze, the movement is brass, and the welding is silver alloy. The over-pressure limit is 25% of full scale value. The working pressure is a maximum of 75% of full scale value. The operating temperature is -40 to 150 degrees F (-40 to 65 degrees C). This pressure gauge is suitable for plumbing, heating, air conditioning, pneumatic, hydraulic, water tanks, and air compressors.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a press...

Manufacturer: Honeywell Brand: Honeywell Model: G64-015

This is a gas pressure test gauge. It is a 15 lb. gas test gauge assembly that has a brass air valve.

Manufacturer: Winters Brand: Winters Model: P3S6077

The Winters P3S 300 series pressure gauge with brass wetted parts has a circular dial enclosed in an aluminum case, and a lower mount male connection with NPT rate, and measures pressure with a dual scale (psi/kPa)/(Hg. vacuum/kPa) with a display accuracy of + or - 0.5%. The brass wetted parts are for measuring non-corrosive liquid and gas pressure. The circular dial is white aluminum, 4.5" (115 mm) or 6" (150 mm) in diameter, and enclosed in an aluminum case that is painted black and Ingress Protection certified IP52 for protection against dust and liquids. The front flange is polished stainless steel. The dial has an aluminum anodized black pointer that is micrometer-adjustable for ease of calibration, and the lens is glass for clarity. The gauge measures pressure with a dual scale of psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 0.5% over the entire range of the gauge, or American Society of Mechanical Engineers (ASME) B40.100 Grade 2A accuracy class. The male connection is mounted on the bottom of the gauge and has either a 1/4" or a 1/2" NPT (National Pipe Thread) rate. The ring for the gauge is polished stainless steel. The bourdon tube is phosphor bronze for pressure ranges up to 600 psi (4,137kPa) and stainless steel 316L for ranges over 600 psi (4,137kPa). The welding is a tin/copper alloy for pressure ranges up to 600 psi (4,137 kPa) and a silver alloy for pressure ranges over 600 psi (4,137kPa). The over-pressure limit is 30% for pressures up to 600 psi (4,137 kPa), 25% for pressures from 600 to 1,400 psi (4,137 to 9,653 kPa), and 15% for pressures over 1,400 psi (9,653 kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -40 to 150 degrees F (-40 to 65 degrees C). This pressure gauge is suitable for boiler and control room applications with air, steam, oil, and fresh water.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given applicati...

Manufacturer: Fluke Corporation Brand: Fluke Model: LVD2/CT Color: LVD2/CT Volt Light, 90-600V

Non-contact AC voltage detector and LED flashlight combined into one easy to use pen-style design. The LVD2 is a CAT IV 600 V rated non-contact detector that is suitable for commercial and industrial applications. The LVD2 includes dual sensitivity turning blue 1 to 5 (2.54cm to 12.7cm) from the source and red when at the source. Dual sensitivity. LED light with 100,000 hour life. Detects from 90 to 600 V AC. Rated to CAT IV 600 V. Dual Levels of Detection. Blue indicates proximity to AC Voltage source. Red indicates you're at the source. Operating temperature 0 to 50 degree C. Ultra-Bright White LED. 100000 hr bulb. AAA battery included.

Manufacturer: Fluke Corporation Brand: Fluke Model: L211

kit includes L200 probe light, TL71 premium DMM test lead set and C75 case. Special value combo pairs the new L200 probe light with one of the most popular test leads by Fluke and a handy carrying case. Small, rugged light easily attaches to any Fluke test probe. Flexible silicone test leads are heat and cold resistant. Zippered case has two inside pockets. Probe light frees both hands for work. 120 hours of battery life. Uses 2 3-volt watch batteries.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: DPGW-06

The Series DPGW is the only economic digital pressure gage for liquids with the ability to select engineering units on the market. With its 1% accuracy and digital push-button zero, the DPGW is the perfect choice for digitally monitoring the pressures of air and compatible liquids and gases.

Manufacturer: Parker Hannifin Brand: Parker Hannifin Model: P32CB94GEANGLNW

Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for liquid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. The company, founded in 1918, is headquartered in Cleveland, OH.

Manufacturer: Fluke Corporation Brand: Fluke Model: FVF-UG

FlukeView Forms plus Designer allows a user to edit an existing form or create a new form to customize the report to individual needs. Use the array of Upgraded analysis and reporting forms to display your data in tables, graphs or helpful diagrams; even leave notes on the forms to draw attention to a particular event. To address the increasing demands for reporting and documentation, Fluke presents FlukeView Forms documenting software. FlukeView Forms increases the power of your Fluke tool by enabling you to document, store and analyze individual readings or series of measurements, then convert them into professional-looking documents. The ability of FlukeView Forms to support multiple instruments enables the user to install and learn only one software application in order to use these multiple tools fully. Use the FlukeView Forms plus Designer to customize your reports or add your company logo. Share or store your data with co-workers or clients - print forms, export to other software programs, or have co-workers and clients down load the free FlukeView Demo/Reader to view and interact with your captured data. With USB/IR cable. It supports the following test tools: 1550B Megaohms meter, 1653/1653B/1654B/1652C electrical installation tester, 180 series, 287 and 289, 45, 53-II B and 54-II B, 568 IR thermometer, 789 Process meter, 8808A, 8845A/8846A, 89-IV and 87-IV, 975 Air Meter Test Tool, 983 Particle Counter. Number of standard forms: 9. Able to modify standard forms. Includes FlukeView Forms Designer for customizing forms. Number of multiple meters whose data can be viewed simultaneously: 8. Number of concurrently running instances of FlukeView Forms allowed: 4. Ability to change company name on report. Supports multi-page forms. Requirements: Operating system: Windows 2000, Windows XP, Windows Vista or Windows 7. Minimum PC Hardware: Pentium class or better microprocessor, 32 MB RAM, 70 MB hard disk space (100 MB to install). Size: 203 x 100 x 50mm.