Pressure Gauges - Page 69

Manufacturer: Winters Brand: Winters Model: PFQ772

The Winters PFQ series pressure gauge with stainless steel wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The stainless steel wetted parts provide corrosion resistance. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi or Hg. vacuum scale or a dual scale of psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection is 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is stainless steel, and the welding is tungsten inert gas (TIG) for strength. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can ra...

Manufacturer: Thuemling Industrial Products Brand: Duro Model: 4207-0133 Color: Stainless

Duro Pressure Gauge is 0.5% full scale accuracy ASME B40.100 Grade 1A accuracy class. Large 4.5-Inches dial allows easy viewing and precise readings. High quality Stainless Steel case, 316 Stainless Steel 1/2-Inches male NPT connection and pressure system, for use with any liquid or gas that is compatible with 316 stainless steel. Quality made in USA.

Manufacturer: Winters Brand: Winters Model: PPC5047R1

The Winters PPC series pressure gauge with stainless steel 316L wetted parts has a circular dial enclosed in a phenolic case, and a male connection, and measures pressure with either a single or dual scale with an accuracy of + or - 0.5%. The stainless steel 316L wetted parts provide corrosion. The black phenolic case is durable and Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The dial is 4.5" (115 mm) in diameter and liquid-fillable to protect against vibration and pulsation. The gauge has a durable phenolic case with a solid front and blowout back for operator safety. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer that is micrometer-adjustable for ease of calibration. The lens is polycarbonate for high impact resistance and has a phenolic lens ring. The gauge measures pressure with either a single scale of psi or Hg. vacuum or a dual scale of psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 0.5% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade 2A accuracy class. The male connection is mounted on the bottom of the gauge and is either a 1/4" or 1/2" NPT (National Pipe Thread) rate. The movement is stainless steel 304 with under- and overload stops to protect the gauge system. The restrictor screws reduce shock to the gauge and prevent wear on the movement. The welding is tungsten inert gas (TIG) for strength. The bourdon tube is drawn seamless stainless steel 316L for additional strength. The gasket is made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1500 psi/kPa, 15% for pressures 1501 to 8700 psi/kPa, and 10% for pressures above 8701 psi/kPa. The operating temperature is -40 to 200 degrees F (-40 to 93 degrees C) dry and -4 to 150 degrees F (-20 to 65 degrees C) when filled with glycerin. This pressure gauge is suitable for corrosive media in process, chemical, and petroleum industries.Pressure gauges are ...

Manufacturer: Fluke Corporation Brand: Fluke Model: VPS510-B Color: Blue

ScopeMeter Compact Probe for electronic applications, blue, 10:1, 500 MHz, 300 V CAT III.

Manufacturer: Toro Brand: Toro

You'll never be missing a hose or adapter when you rely on this self-contained unit. Its long-lasting copper fitting is designed to fit any standard hose bib. Water flow and water pressure are both controlled by the 3/4 inch brass gate valve.

Manufacturer: PIC Brand: PIC

NEW PIC 6001-4LK 0-600PSI 6 IN 1/4 IN NPT PRESSURE GAUGE D526121

Manufacturer: Fluke Corporation Brand: Fluke Model: BP120MH

Battery pack as replacement battery in the Fluke 120 series ScopeMeters and in the Fluke 43 and 43B power quality analyzers. The BP120MH is a Nickel-Metal-Hydride battery pack, made specifically to support the ScopeMeters and power quality analyzers mentioned. The battery capacity is 3000 mAh, this is 50 percent more than that of the original BP120. As a results, the instrument-user will benefit from a much longer 'up time' than with the original NiCd battery, at the same volume and weight. The BP120MH is more environmental-friendly than the NiCd battery used before, as it contains no heavy metals. Just as before, the battery pack can be charged while installed in the instrument, using the PM8907 power adapter/charger. Nominal voltage: 4.8V. Capacity: 3000 mAh.

Manufacturer: SSI Technologies Brand: SSI Technologies Model: MG1-5-A-9V-R Color: Black/Blue

Digital Pressure Gauge, 2 1/2" dial, Automatic Shutdown after 3 min, SS sensor. The Media Gauge is a multi-functional Digital gauge. Contains a media isolated piezo resistive pressure sensing element, signal conditioning, a 304 sensing port and LCD back lit display. A battery saver is incorporated to automatically shut the LCD display off after 3 minutes prolonging the batteries life. Chemical Capabilities: Any Gas or Liquid compatible with 304L stainless steel. For example: Motor Oils, Diesel, Hydraulics, Water, Nitrogen, Air.

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 25-510-160-psi

The NoShok 400 series pressure gauge has stainless steel 316 wetted parts, a dry, fillable, or liquid-filled circular dial enclosed in a stainless steel 304 case, a lower mount or center back male connection, and measures pressure with a single scale with an accuracy of + or - 1%, 1.5%, or 2.5%. The stainless steel 316 wetted parts and the stainless steel 304 case provide corrosion resistance. The gauge measures pressure with a single psi or Hg. vacuum scale. The dial comes in 1.5" (40 mm), 2.5" (63 mm) diameters, 4" (100 mm), and 6" (152 mm) diameters. The dial can be dry, dry/fillable, or liquid filled, depending upon the model. The specifications for each type of gauge vary according to the gauge size. The dial lens comes in three different forms of transparent materials for strength and clarity. The lens on the 1.5" and 4" diameter dials is instrument glass. The lens on the 2.5" diameter dial is transparent polyamide. The lens on the 6" dial is laminated safety glass. The dial is white aluminum with black markings and is UV resistant. The pointer type varies depending upon the dial size. The 1.5" dial has a black finished aluminum pointer. The 2.5" and 4" dials have a balanced aluminum pointer with a black finish. The 6" dial also has a balanced aluminum pointer with a black finish, and it is micrometer-adjustable.Gauge accuracy varies according to gauge size. The 1.5" dial is accurate to + or - 2.5% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade B accuracy class. The 2.5" gauge is accurate to + or - 1.5% over the entire range of the gauge, ASME B40.100 Grade A accuracy class. The 4" and 6" gauges are accurate to + or - 1% over the entire range of the gauge, ASME B40.100 Grade 1A accuracy class. All gauges come with either a lower mount or center back connection. The connection for the 1.5" gauge is a 1/8" NPT (National Pipe Thread) rate. The connection for the 2.5" gauge is a 1/4" NPT rate. The connection for the 4" and 6" gauges is a 1/2" NPT rate. The move...

Manufacturer: Fluke Brand: Fluke Model: 4542300

Li-Ion Battery for Fluke Battery Analyzers with 7.4V, 3000mAh.