|
|
-
3.8 of 5.0 with 44 Reviews
SALE PRICE: $275.00 1% OFF
Manufacturer: TURCK
Brand: Turck
Manufacturer: TURCK
Brand: Turck
TURCK PC100-GI1/4A1M-LUAPN8X-H1141 PROGRAMMABLE PRESSURE SENSOR, RANGE: 0... +100BAR/1450PSI, MAX SURGE PRESSURE: 400BAR/5800PSI, UE: 24V, UA: 0...10V, 200MA, IP67,
-
3.8 of 5.0 with 9 Reviews
SALE PRICE: $286.80 1% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: A3015
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: A3015
|
Photohelic Switch/Gages function as versatile, highly repeatable pressure switches combined with a precise pressure gage employing the time-proven Magnehelic gage design. The Photohelic switch/gage measures and controls positive, negative or differential pressures of air and compatible gases. Standard models are rated to 25 psig (1.7 bar) with options to 35 (2.4) or 80 (5.5 bar) psig. Single pressure 36000S models measure to 6000 psig (413 bar) with a 9000 psig (620 bar) rating. Two phototransistor actuated, DPDT relays are included for low/high limit control. Easy to adjust set point indicators are controlled by knobs located on the gage face. Individual set point deadband is one pointer width - less than 1% of full scale. Set points can be interlocked to provide variable deadband - ideal for control of fans, dampers, etc. Gage reading is continuous and unaffected by switch operation, even during loss of electrical power. Choose from full scale pressure ranges from a low 0-.25" (0-6 mm) WC up to 30 psi (21 bar); single positive pressure to 6000 psig (413 bar).
-
3.8 of 5.0 with 10 Reviews
SALE PRICE: $300.66 1% OFF
Manufacturer: Ashcroft Inc.
Brand: Ashcroft
Model: 451082AS02LXTY100#
Manufacturer: Ashcroft Inc.
Brand: Ashcroft
Model: 451082AS02LXTY100#
The standard Ashcroft test gauge case style features a solid-front aluminum case with a hinged ring. The dial has a polished mirror band for pointer reflection to prevent parallax error.
-
3.8 of 5.0 with 10 Reviews
SALE PRICE: $411.00 1% OFF
Manufacturer: WIKA Instrument Corporation
Brand: WIKA
Model: 4375390
Manufacturer: WIKA Instrument Corporation
Brand: WIKA
Model: 4375390
|
The WIKA differential pressure gauge has stainless steel 316L wetted parts which resist corrosion against chloride, and a dial that is enclosed in a thermoplastic case for increased durability in low temperature environments. The gauge measures pressure up to 100 pounds per square inch differential (psid) and 400 inches of water (inH2O), and is accurate to + or - 2 percent of span over the entire range of the gauge. The female connection is mounted on the back of the gauge and has a 1/4" National Pipe Thread (NPT) rate. This pressure gauge is suitable for use in applications that require measuring high differential and static process pressures. Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure across a given range.WIKA Instrument Corporation is a global manufacturer of pressure and temperature measurement instruments, including pressure gauges, diaphragm seals, pressure transmitters, and thermometers, that meet International Organization for Standardization (ISO) standards for ...
-
3.7 of 5.0 with 17 Reviews
SALE PRICE: $9.99 2% OFF
Manufacturer: Forney
Brand: Forney
Model: 75554
Manufacturer: Forney
Brand: Forney
Model: 75554
The Forney 75554 0-160 PSI 2-1/4-inch air line pressure gauge with bottom mount 1/4-inch NPT is a bottom mount. Not suitable for liquids or other gases. Forney Industries is one of Americas longest operating family-owned metal working product companies. Founded in 1932, Forney offers more than 5,000 products for the hardware, automotive, farm and ranch and do-it-yourself markets. If you've got metal working questions, we've got answers. Were committed to your success regardless of location size or needs. 0-160 PSI 2-1/4-inch (57.15mm) air line pressure gauge with bottom mount 1/4-inch (6.35mm) NPT. Claims for warranty must be made within 90 days of the date of purchase. Proof of purchase required. This warranty does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended.
-
3.7 of 5.0 with 39 Reviews
SALE PRICE: $21.84 1% OFF
Manufacturer: Fotronic Corporation
Brand: Yellow Jacket
Model: 49015
Color: Red
Manufacturer: Fotronic Corporation
Brand: Yellow Jacket
Model: 49015
Color: Red
Steel case for durability, high-visibility dials with colored temperature scales for easy reading. Flutter less technology surge protector minimizes the needle pulsation for improved accuracy.
-
3.7 of 5.0 with 28 Reviews
SALE PRICE: $25.48 1% OFF
Manufacturer: Winters
Brand: Winters
Model: PFQ810
Manufacturer: Winters
Brand: Winters
Model: PFQ810
|
The Winters PFQ series pressure gauge with brass wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The OT58 brass wetted parts are for measuring non-corrosive liquid and gas pressure. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi scale or a dual scale of psi/kPa, psi/bar, Hg. vacuum/kPa, or Hg. vacuum/bar. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection comes with a 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is OT59 brass, and the welding is silver alloy. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges ca...
-
3.7 of 5.0 with 37 Reviews
SALE PRICE: $35.99
Manufacturer: Fluke Corporation
Brand: Fluke
Model: AC285-FTP
Manufacturer: Fluke Corporation
Brand: Fluke
Model: AC285-FTP
Includes model a pair of red and black extra large alligator clips plus adaptors to securely attach the alligator clips to Fluke fused test probes FTP-1, FTPL-1, FTP and FTPL. SureGrip has rubber overmolded surfaces for a firm reliable grip. Multi-purpose tooth pattern grips anything from fine gauge wire to a 20mm (0.75") nut. Strong, nickel-plated steel jaws for a tight hold. Conforms to safety standard IEC61010-031:2002 +A1:2008, CAT III 1000V, CAT IV 600V. 10A maximum, pollution degree 2, 2000 m altitude. Operating temperature: -4 to 131 degree F, 95 percent RH. One-year warranty.
-
3.7 of 5.0 with 37 Reviews
SALE PRICE: $49.95 1% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 2-5005
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 2-5005
|
Combining clean design, small size and low cost with enough accuracy for all but the most demanding applications our Minihelic II gage offers the latest in design features for a dial type differential pressure gage. It is our most compact gage but is easy to read and can safely operate at total pressures up to 30 psig. The Minihelic II gage is designed for panel mounting in a single 2-5/8" diameter hole. Standard pressure connections are barbed fittings for 3/16" ID tubing; optional 1/8" male NPT connections are also available. Over-pressure protection is built into the Minihelic II gage by means of a blow-out membrane molded in conjunction with the diaphragm. Accidental over-ranging up to the rated total pressure will not damage the gage. With removable lens and rear housing, the gage may be easily serviced at minimum cost. With the housing molded from mineral and glass filled nylon and the lens molded from acrylic, the gage will withstand rough use and exposure as well as high total pressure. The 5% accuracy and low cost of the Minihelic II gage make it well-suited for a wide variety of OEM and user applications. OEM applications include cabinet air purging, medical respiratory therapy equipment, air samplers, laminar flow hoods, and electronic air cooling systems. As an air filter gage, the Minihelic II gage finds many end use applications on large stationary engines, compressors, ventilators, and air handling units. The Minihelic II gage is suitable for many of the same applications as the Magnehelic gage where the greater accuracy, sensitivity, and higher and lower differential pressure ranges of the Magnehelic gage are not required.
-
3.7 of 5.0 with 19 Reviews
SALE PRICE: $54.08 1% OFF
Manufacturer: Winters
Brand: Winters
Model: PFP852
Manufacturer: Winters
Brand: Winters
Model: PFP852
|
The Winters PFP series pressure gauge with stainless steel 316 wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case and a 1/4" NPT male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1% or 1.5%. The stainless steel 316 wetted parts provide corrosion resistance. The socket for the 2.5" and 4" gauges is one-piece welded for strength. The stainless steel 304 case is corrosion resistant and Ingress Protection certified IP66 for protection against solid objects, including dust or liquids, and is appropriate for outdoor and severe ambient and process conditions. The circular dial comes in 2.5" (63 mm), 4" (100 mm), and 6" (150 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer, and the lens is polycarbonate for high impact resistance. The pointer for the 4" and 6" gauges is micrometer adjustable for ease of calibration. The gauge measures pressure with either a single scale in psi or Hg. vacuum, or a dual scale of either psi/kPa or Hg. vacuum/kPa. The 2.5" gauge is accurate to + or - 1.5% of full scale value. The 4" and 6" gauge are accurate to + or - 1% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade 1A accuracy class. The male connection has a 1/4" NPT (National Pipe Thread) rate and comes with a bottom, lower back, or center back mount. The bourdon tube is drawn seamless stainless steel 316 for additional strength, the movement is stainless steel 304, and the welding is tungsten inert gas (TIG) for strength. The socket gasket, fill plug, and lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 30% for pressures up to 600 psi (4,147 kPa) and 15% for pressures over 600 psi (4,147 kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). ...
|
|