Pressure Gauges - Page 86

Manufacturer: Winters Brand: Winters Model: PFQ703

The Winters PFQ series pressure gauge with brass wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The OT58 brass wetted parts are for measuring non-corrosive liquid and gas pressure. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi scale or a dual scale of psi/kPa, psi/bar, Hg. vacuum/kPa, or Hg. vacuum/bar. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection comes with a 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is OT59 brass, and the welding is silver alloy. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges ca...

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 9310754

The WIKA industrial pressure gauge has copper alloy wetted parts, which resist corrosion against salty liquids, and a circular dial that is three inches in diameter and enclosed in a forged brass case for increased durability in corrosive environments. The gauge measures pressure from 15 pounds per square inch (psi) to 15,000 psi, and is accurate to + or - 2/1/2 percent of span over the entire range of the gauge, or American Society for Mechanical Engineering (ASME) B40.100 Grade A accuracy class. The male connection is mounted on the lower back of the gauge and has a 1/4" National Pipe Thread (NPT) rate. This pressure gauge is suitable for use with paper machines and hydraulic presses.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure across a given range.WIKA Instrument Corporation is a global manufacturer of pressure and temperature measurement instruments, including pressure gauges, diaphragm seals, pressure transmitters, and thermometers, that meet International Organizati...

Manufacturer: COLE-PARMER Brand: Dwyer

The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge's motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure. The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages. What's Included: Two 1/8" NPT plugs, two 1/8" rubber tubing adapters, and three mounting adapters with screws The industry standard in indicating low air or gas pressures of positive, negative, or differential pressures Large, easy-to-read 4" (102 mm) dial No manometer fluid to evaporate, freeze, or cause toxic or leveling problems

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 1223-16-D

These inexpensive manometers measure positive, negative and differential pressures. Dwyer Flex-Tube U-Tube Manometers combine the inherent accuracy of the simple "U" Tube with the durability of tough, long-lasting plastic construction. Columns are of .375" O.D. flexible and shatter proof clear butyrate tubing. They are easily accessible for cleaning. Indicating tube is backed by white scale channel to provide maximum color contrast. Scales are extruded high impact polystyrene plastic, formed to hold columns in perfect alignment. Stark white scales have graduations and numbers silkscreen-printed in black for maximum legibility.

Manufacturer: Enerpac Brand: Enerpac Model: G2535L

This Enerpac G2535L pressure gauge with 2-1/2"-dia. face displays a dual scale of 0 to 10,000 psi (pounds per square inch) and 0 to 700 bar to measure and help monitor pressure within a hydraulic system. It has a lower-mount connection with 1/4" National Pipe Taper Fuel (NPTF) male threads. Glycerin is sealed into the gauge to provide more stable readings and better visibility than dry gauges. The safety blowout disk provides a place of failure in case of over pressurization to help protect the rest of the gauge. Accuracy is +/-1.5%.Enerpac manufactures high-pressure tools and equipment for industrial applications. The company, founded in 1910, is headquartered in Menomonee Falls, WI.

Manufacturer: Winters Brand: Winters Model: PPS5069R1Z

Stabilizr dampened movement minimizes effects of pulsation and vibration without liquid filling. Full safety pattern solid front, blowout back. Stainless steel full rotary movement. Micrometer pointer for ease in calibration. 5 Year warranty. Micrometer pointer for ease in calibration. Under and overload stops. 316L Stainless steel wetted parts standard. CRN registered. Dial: 4.5" aluminum with black and red markings. Case: black phenolic with safety blowout back, solid front, integral back flange. Solid wall: phenolic. Lens: polycarbonate. Ring: Phenolic. Pointer: aluminum, anodized black, micrometer adjustable. Socket: 316L stainless steel. Connection: 1/2" NPT. Bourdon tube: 316L stainless steel. Movement: 304 stainless steel protected with over/under stops (stabilized). Gasket material: silicone. Welding: TIG. Over-pressure limit: 25 percent for pressures up to 1500 psi/kPa. Working pressure: maximum 75 percent of full scale value. Ambient/process temperature: -4 degree to 200 degree fahrenheit (-40 degree celcius to 93 degree celcius). Accuracy: +/- 0.5 percent ANSI/ASME Grade 2A. Enclosure rating: IP65. Used where operator safety is a must. Ideally suited for process, chemical and petroleum industry applications where chemical compatibility and contamination is a concern. Process where pulsation or vibration exist.

Manufacturer: Ashcroft Inc. Brand: Ashcroft Model: 351009SW02B100#

Ashcroft is pleased to reintroduce the 1009SW Duralife pressure gauge. This gauge has been upgraded with many new features outlined above while maintaining the tried and true performance and quality you have come to expect. Duralife 1009SW gauges provide significant features and benefits. New features include a ventable plug that can be sealed or vented depending on your environment and a patent pending through-dial recalibration that reduces recalibration time. The combination of features including the patented PowerFlex movement and optional PLUS! Performance dampening system in the 1009SW is the finest gauge technology for vibration, shock and pulsation applications. Available in pressure ranges from vacuum to 15,000 psi, including compound and metric ranges.

Manufacturer: Winters Brand: Winters Instruments Model: PFQ770

The Winters PFQ series pressure gauge with stainless steel wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The stainless steel wetted parts provide corrosion resistance. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi or Hg. vacuum scale or a dual scale of psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection is 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is stainless steel, and the welding is tungsten inert gas (TIG) for strength. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can ra...

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 9834847

The WIKA process pressure gauge has copper alloy wetted parts, which resist corrosion against salty liquids, and a circular dial that is enclosed in a thermoplastic case for increased durability, particularly in low temperature environments. The gauge measures pressure from 15 pounds per square inch (psi) to 1,000 psi, and is accurate to + or - 0.5 percent of span over the entire range of the gauge, or American Society for Mechanical Engineering (ASME) B40.100 Grade 2A accuracy class. The male connection is mounted on the bottom of the gauge and comes with a choice of a 1/4" or 1/2" National Pipe Thread (NPT) rate. This gauge is suitable for use in corrosive environments in process industries, such as chemical or petrochemical applications, mining applications, and power stations.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure across a given range.WIKA Instrument Corporation is a global manufacturer of pressure and temperature measurement instruments, including pressure gauge...

Manufacturer: Fluke Corporation Brand: Fluke Model: 80PK-24

The innovative SureGripTM design has a soft rubber handle combined with a ergonomic shape is so comfortable to hold that you'll forget about the probe and focus on the measurement. All SureGrip probes have an improved, more flexible strain relief for a long life.