Conductivity Meters & Accessories - Page 14

Manufacturer: Thermo Scientific Brand: Oakton Model: WD-35608-57

The Oakton 35608-57 is a conductivity/Total Dissolved Solids (TDS) electrode, with cell constant of K=1.0 for mid-range conductivity measurements. The electrode, also known as a probe, measures the conductivity and TDS of a solution, and is commonly used in testing water, such as pure and sea water, in field and laboratory applications. This probe features stainless steel sensors for specific application, Polyetherimide (PEI) ultem-body housing for chemical resistance, and an 8-pin DIN connection for stability. It comes with a removable, plastic probe guard to preserve the unit, and an extra-long (16-foot) cable for ease of use. The 35608-57 electrode has a temperature range of 0 to 80 degrees C (32 to 176 degrees F) and is used for mid-range conductivity measurements. Its dimensions are 100 (l) x 12 (d) mm. It is intended for use with the Oakton CON 400, CON 410, TDS 400, CON 510, pH/CON 300, pH/CON 510, CON 11, CON 110 and meters that have 5-pin Deutsches Institut für Normung (DIN)-connections (sold separately). An electrode is used with a meter to measure the parameters of a substance. Conductivity is the ability of a solution or material to conduct an electrical current. TDS measurement indicates materials such as salts, bases or minerals, which contribute to electrical conductivity, within a solution. Oakton Instruments manufactures an array of scientific instruments for research, industrial, and educational uses. Since 1991, Oakton has distributed a wide variety of instruments such as meters, electrodes, and transmitters. Oakton is based in Vernon Hills, IL, and has facilities in Europe, Asia, and China. What’s in the Box? One electrode WD-35608-57 One 16-foot cable

Manufacturer: FLIR Systems Brand: Extech Model: TL400

Test Leads for Extech Models 480400 and 480403 Phase Rotation Testers. Includes 3 color-coded cables with large alligator clips.

Manufacturer: Thomas Scientific Brand: YSI Model: 061320

Zobell solution is used for calibrating ORP/Redox on several YSI instruments.

Manufacturer: Ohaus Brand: Ohaus Model: 30073979

Ohaus pen meters provide accurate measurement of pH, oxidation-reduction potential (ORP), conductivity, salinity and total dissolved solids (TDS). Starter pen meters are the economical option when you are simply looking for meters that will provide accurate measurement with no restriction. Each meter offers simple operation in a slim & portable design providing fast, straight-forward results time and time again. Durably constructed to withstand wear and tear, Ohaus pen meters provide a sturdy plastic, waterproof housing, protective safety cap, integrated wrist strap and auto shutdown feature to preserve battery life.

Manufacturer: Thermo Scientific Brand: Oakton Model: WD-35661-70

The Oakton 35661-70 electrical conductivity (EC) and total dissolved solids (TDS) kit is a calibration kit that comes with pouches, rinse water, sample jar, and a foam-lined, plastic carrying case. A calibration kit contains supplies to assist in the calibration process in aquaculture, aquariums, fish ponds, food processing, swimming pools, and in environmental treatment. This kit is suitable for field use and for use with plants. This deluxe calibration kit contains two each of calibration pouches with 20 mL of solution; 447 μS, 1413 μS, 2764 μS, 15,000 μS and rinse water. The single-use pouches are individually sealed for ease of application. The materials are NIST-traceable for reliability. The kit comes with a sample jar for placement of substance. The kit comes in a foam-lined hard plastic carrying case with impressed areas for protection of supplies. The 35661-70 solutions have accuracy of + or - 1% at 25 degrees C. The kit is used with Oakton standard and dual-range TDS testers, and EC testers. EC measures in microsiemens (μS), and TDS measures in parts per million (ppm). Conductivity is the ability of a solution or material to conduct an electrical current. TDS, such as salts and minerals, contribute to the conductivity of a solution. A TDS meter measures conductivity of a substance and converts it to a TDS reading. EC and TDS readings are commonly used by researchers, manufacturers, and hobbyists in aquaculture, agriculture, hydroponics, and water-testing and for scientific applications. Oakton Instruments manufactures an array of scientific instruments for research, industrial, and educational uses. Since 1991, Oakton has distributed a wide variety of instruments such as meters, electrodes, and transmitters. Oakton is based in Vernon Hills, IL, and has facilities in Europe, Asia, and China. What’s in the Box? Hard carrying caseCalibration pouchesRinse waterSample jar

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: PRIMO4

The Hanna Instruments Primo 4 is a conductivity tester for water quality applications, with automatic temperature compensation, automatic calibration, and automatic shutoff after five minutes of non-use. The meter is operated by a single button at the top of the meter. It has a cabled probe, which is useful for demonstrating before and after results of conditioning and filtration systems. Conductivity meters are commonly used in the water-quality testing, waste-water treatment, hydroponics, agriculture, and aquaculture industries, in cosmetics manufacturing, and in laboratory research.Specifications Range 0 to 10.00 mS/cm Resolution 0.01 mS/cm Accuracy + or - 2% Full Scale Calibration Automatic, at 5.00 mS/cm Temperature compensation Automatic, 0 to 60 degrees C (32 to 140 degrees F), temperature coefficient equal to 2% per degree C Power source Two 1.5V batteries (included) Dimensions (meter only)66 x 50 x 25mm / 2.6 x 2.0 x 1.0" (H x W x D) Weight (with probe)363g / 12.8oz  H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Conductivity meters, also known as electrical conductivity (EC) meters, measure the ability of a solution or material to conduct an electrical current. This measurement helps determine if the solution is, for example, contaminated or contains too much saline. In general, pure solutions, such as distilled water, have low conductivity. More saline- or nutrient-rich solutions, such as seawater or fertilizers, have high conductivity. Conductivity measurements are often used with total dissolved solids (TDS) measurements, which are typically expressed in ppm (parts per million). TDS consist of dissolved minerals and salts. To determine the amount of TDS, conductivity is measured, and the result is converted to a TDS measurement. Different meters provide results for conductivity, TDS, or both, and the application determines meter selection. Conductivity ...

Manufacturer: Eil Analogic Brand: Eil Analogic

Eil Analogic Measurometer An/Pi4453-L-C-1-3 (5447)

Manufacturer: HM ELECTRONICS Brand: HM Digital Model: HM TRM-1

Triple Inline TDS MonitorThree sensor TDS monitor that is ideal for checking TDS levels at 3 points, such as with DI/RO (deionization / reverse osmosis), or multiple points in an RO system, and more. FEATURES Displays TDS levels of the three sensing points with electrode probes. Highly efficient and accurate due to its advanced microprocessor technology. Auto-Off function conserves battery power. The unit shuts off automatically after 10 minutes of non-use. Dual Range 0-9990 ppm (From 0 - 999 ppm the resolution is 1 ppm. From 1000 to 9990 ppm, the resolution is 10 ppm, indicated by a blinking 'x10' image.) Factory Calibrated: calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver. Comes equipped with Quick-Connect T-fittings (standard is 1/4"T-fittings) Installs quickly and easily. SPECIFICATIONS Range: 0-9990 ppm Accuracy: +/-2% Conversion Factor: NaCl (avg. 0.5) Cable Length: 24.5" (including sensor) Fittings: 1/4" standard Power source: 2 x 1.5V button cell batteries include batteries Battery life: approx. 1000 hours of continuous use Comes with Quick-Connect T-fittings (standard is with 1/4")

Manufacturer: HM ELECTRONICS Brand: HM Digital Model: COM-80

This EC/TDS Temperature meter is for Water Quality testing applications such as hydroponics & gardening, pools & spas, aquariums & reef tanks, water ionizers, drinking water and moreFEATURES Measures electrical conductivity (EC) ?S, mS; total dissolved solids (TDS) ppm, ppt Automatic Temperature Compensation (ATC) Water resistant Digital Calibration,Auto-off,data-hold function and low-battery indicator Display: large LCD screen includes temperature reading Factory Calibrated with a 1413 ?S solution. The meter can be recalibrated with digital calibration using the push buttons Includes a protective cap, please note: battery not included for safe delivery SPECIFICATIONS EC Range: 0 - 9990 ?S; 0 - 9.9 mS TDS Range: 0 - 5000 ppm (mg/L); 0 - 5.0 ppt Temperature Range: 1-80 ¡ãC; 33-176 ¡ãF Resolution: 1 ?S/ppm; 0.1 mS/ppt. Temp.resolution: 0.1 ¡ãC/F Accuracy: +/- 2% EC-to-TDS Conversion Factor: NaCl (avg of 0.5). Calibration: Digital calibration by push button. Probe: Fixed Housing: Water resistant Power source: 3 x 1.5V button cell batteries ( not included) (model LR44 or equivalent) Dimensions: 15.3 x 3.2 x 1.8 cm (6.0 x 1.3 x 0.7 inches) Weight: 53.9g (1.9 oz)

Manufacturer: XPERT OMATIC Brand: Xpert Omatic

The water that flows from our taps is full of chemicals, pollutants and metals, which is why it is extremely important to clean your water before drinking if you are wanting to maintain optimal health. Well, the only way to make sure your water is clean and healthy is to test it regularly. When it comes to testing your water, there is only one TDS EC meter meter which you can trust.Meet the #1 Professional TDS Meter Digital Water TesterCarefully constructed out of the finest quality materials available, this TDS meter for water is much stronger and more durable than other models currently for sale. While this little device is commonly used to test drinking water, it can also be used for a range of other things. Use the TDS meter for hydroponics, use the TDS meter for coffee or use the TDS meter for aquariums. The possibilities are virtually endless!Unlike other TDS meters which force you to squint at the readings, this one offers a large digital display that clearly provides accurate readings with each and every use. For your convenience, our TDS water meter has been outfitted with an auto-off feature which saves power in order to extend the life of the battery. There is also a light on the mini gadget that lets you know when it's time to change the filter in your drinking carafe, coffee maker or aquariumTOP FEATURES:✓ Easy to Use TDS Meter✓ Convenient Digital Display✓ Power-Saving Auto Off Function✓Compact, Portable Size✓Includes Extra Battery Pack✓Protective Leather Case✓Accurate, Dependable Readings✓Backed by our 3 years Satisfaction Guarantee!Well, what are you waiting for?It's time to equip yourself with the easiest to use TDS meter ATC available.Click 'ADD TO CART' to order your own High Range TDS Meter today!