Conductivity Meters & Accessories - Page 16

Manufacturer: Huanyu Instrument Brand: Huanyu Instrument

Huanyu Instrument Huanyu Instrument® mainly provides instruments and tools. We provide voltage customized services, specific requirements can be contacted by email, we will respond promptly.After your order is confirmed, the product usually takes 7--13 business days to arrive to your hand. Product description ITO glass has the property of low sheet resistance and high transmittance, and it is widely used in the production and research of OLED, OPV, electrochromic device, e-book, electrochemistry, Low-Temperature Solution-Processed Perovskite Solar Cells, et al. Technical Datas  Size:100mmx100mmx1.1mm Sheet Resistance:82% Thickness of the ITO Layer:1000+/-200A Luster of the ITO Layer:Golden Color of the Cross Section:Light Blue Package included:12 pcs ITO glass Friendly Reminder When purchase, please confirm the product is from our Huanyu Instrument, otherwise we can't ensure the quality and after-sale service.We will try our best to provide you the best product and service, welcome to buy our product.

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: BL983315-1

This instrument has been designed for TDS control in hydroponics, horticulture and water conditioning. Compact in size, it can be mounted in confined spaces or even right next to the vat or barrel containing the chemicals. These meters permit automatic control of installations previously checked manually. Readings are shown on the display and the multicolored LED continuously indicates if the mini controller is in measurement, dosing or alarm mode. Users can choose automatic or manual dosing mode with a switch on the front panel. Manual control is particularly useful during maintenance operations, because it permits operators to enable or disable the dosing relay according to your need. The overtime control system advises users when the relay is active too long, helping to prevent over dosage. This model is supplied with mounting brackets, transparent cover and instruction manual. Range: 0.0 to 199.9 ppm. Resolution: 0.1 ppm. Accuracy at 25 degree C: +/-2 percent F.S. Calibration: TDS conversion factor: 0.5. manual with CAL trimmer. Temperature compensation: automatic, 5 to 50 degree C (41 - 122 degree F) with Beta = 2 percent/degree C. 115/230V Power supply. Setpoint: adjustable from 0 to 199.9 ppm. Overtime: adjustable, typically from 5 to approx. 30 minutes. Measures 3-3/32" length by 1-57/64" width by 3-11/16" height.

Manufacturer: Huanyu Instrument Brand: Huanyu Instrument

Huanyu Instrument Huanyu Instrument® mainly provides instruments and tools. We provide voltage customized services, specific requirements can be contacted by email, we will respond promptly.After your order is confirmed, the product usually takes 7--13 business days to arrive to your hand. Product description ITO glass has the property of low sheet resistance and high transmittance, and it is widely used in the production and research of OLED, OPV, electrochromic device, e-book, electrochemistry, Low-Temperature Solution-Processed Perovskite Solar Cells, et al. Technical Datas  Size:100mmx100mmx1.1mm Sheet Resistance:82% Thickness of the ITO Layer:1000+/-200A Luster of the ITO Layer:Golden Color of the Cross Section:Light Blue Package included:12 pcs ITO glass Friendly Reminder When purchase, please confirm the product is from our Huanyu Instrument, otherwise we can't ensure the quality and after-sale service.We will try our best to provide you the best product and service, welcome to buy our product.

Manufacturer: Azzota Brand: Azzota Model: WPCM-40

Calibration Solutions included, 2 AAA Batteries included, Carrying Case (11x9x3 inch) included

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI3001

The Hanna Instruments HI 3001 is a submersible flow-through four-ring monitoring electro-conductivity (EC) electrode with a negative temperature coefficient (NTC) sensor for Automatic Temperature Compensation (ATC), a nontoxic polyvinylidene fluoride (PVDF) body with polyetherimide (PEI) protective sleeve, a platinum sensor, 1/2" and 3/4" National Pipe Thread Tapered Thread (NPT) external threads, a 3m (9.8') cable, a Deutsches Institut für Normung (DIN) connector, and operates in pressurized systems. A pH electrode is commonly attached to a pH meter to measure the pH of a substance such as water, food, beer, or wine in lab, industrial, and food applications. This electrode has an NTC sensor that provides ATC for accurate readings in fluctuating temperatures. The PVDF body is nontoxic and compatible with food. The PEI protective sleeve provides resistance against mechanical stress. A platinum sensor measures conductivity. The 1/2" external thread on the front allows for flow-through mounting and the 3/4" threads on the back for submersion or pipe mounting. The electrode operates in pressurized systems up to 87 psi (6 bar). The electrode comes with a 3m (9.8') cable.SpecificationsBody materialPVDF and PEIATC sensorNTCATC range0 to 60 degrees COperating temperature0 to 80 degrees C (32 to 176 degrees F)Maximum pressure6 bar (87 psi)Cable3m (9.8')An electrode, also called a sensor or probe, is an instrument used with a meter to test and measure parameters of a substance. All electrodes are probes or sensors, but not all probes are electrodes or sensors. Probes, such as temperature probes, are used to penetrate a material for measurement. Common electrode types are pH, total dissolved solid (TDS), and ion selective electrode (ISE). Electrodes can be half-cell or full-cell (also called combination) types. They can be refillable or non-refillable. Housing material is typically glass or epoxy, and sensors are commonly made with stainless steel or a glass bulb. pH electrodes, which measure the pH of a substance, often...

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI3316D

HI 87314 is a combination, portable meter that can read conductivity in four different ranges and resistivity. For conductivity measurements, a one-point calibration is performed via a trimmer located in the battery compartment. The supplied probe does not require recalibration when switching from one range to another. The four-ring (stainless steel) probe has a built-in temperature sensor that automatically compensates for temperature changes. The temperature coefficient can be adjusted from 0 to 2.5 percent using a knob on the front panel. For resistivity measurements, the meter is factory calibrated and, if necessary, calibration can be adjusted. The HI 3316D resistivity probe is easy to clean and requires little maintenance. It also features a built-in temperature sensor to automatically compensate for temperature variations. The temperature coefficient is user-selectable from 2 to 7 percent . Range: EC: 199.9 microsecond per centimeter; 1999 microsecond per centimeter; 19.99 microsecond per centimeter; 199.9 microsecond per centimeter. Resistivity: 0 to 19.90 MO cm. Resolution: EC: 0.1 microsecond per centimeter; 1 microsecond per centimeter; 0.01 microsecond per centimeter; 0.1 microsecond per centimeter. Resistivity: 0.10 MO cm. Accuracy at 20 degree C, EC: +/-1 percent FS, Resistivity: +/-2 percent FS. Calibration: Manual, 1 point, for both EC and resistivity. Temperature compensation: Automatic from 0 to 50 degree C with Beta selectable from 0 to 2.5 percent / degree C for EC and from 2 to 7 percent / degree C for resistivity. Probes: Conductivity probe with internal temperature sensor, DIN connector and 1 m (3.3') cable; HI 3316D resistivity probe with internal temperature sensor, DIN connector and 1m (3.3') cable. Battery type/life: 9V/approximately 100 hours of continuous use. Environment: 0 to 50 degree C (32 to 122 degree F); RH max 100 percent . Measures 5-11/16" length by 1-25/64" width by 3-3/32" height.

Manufacturer: YSI Brand: YSI

The YSI 3232 Conductivity Cell Adapter enables YSI 3400 series conductivity cells to connect with models 3100 and 3200 conductivity instruments (cells and instruments sold separately). The adapter has a 7-pin mini-DIN that plugs into a mounting post on the rear of a compatible conductivity instrument, and two binding posts for connecting a conductivity cell. YSI manufactures instruments, sensors, and software for environmental water quality monitoring and testing. The company, founded in 1948, is headquartered in Yellow Springs, OH.

Manufacturer: NEWGATE Brand: i-mesh-bean Model: 109-4003

Manufacturer: MECO Co.,LTD Brand: Worldoor Model: 400103-00020

LCD Digital TDS Meter Tester Water Quality Ppm Purity Filter (TDS Tester)

Manufacturer: LYNXTECH Brand: LYNXTECH Color: TDS-LY

Product Description How Pure is Your Water? A TDS meter (aka ppm pen, nutrient tester, tds stick) is an inexpensive and convenient digital tool to instantly check your overall water quality. TDS = Total Dissolved Solids, which is any salt, metal or mineral in the water. With the push of a button, the TDS can tell you your overall water purity level,which will be displayed on the screen in ppm (parts per million). The lower the TDS level, the purer the water, with 0 ppm being pure H2O. The TDS is great for checking your tap water quality, or knowing when to change a filter. (The meter does not test for biological contaminants.) The TDS is a great tool for drinking water, water filtration and purification,hydroponics (test your nutrients), colloidal silver, aquariums, RO/DI systems, pools and spas, and more. From the Manufacturer TDS Tester with Advanced Microprocessor Technology. TDS:ATC (Automatic Temperature Compensation).Measurement Range: 0-9990 ppm , 1 ppm Resolution, +/- 2% Readout Accuracy TDS-EZ:Measurement Range: 0-9990 ppm , 1 ppm Resolution, +/- 3% Readout Accuracy. TDS-3:Measurement Range: 0-9990 ppm , 1 ppm Resolution, +/- 2% Readout Accuracy. TDS-3TM:Measurement Range: 0-9990 ppm , 1 ppm Resolution, +/- 2% Readout Accuracy. TDS-4:ATC (Automatic Temperature Compensation).Measurement Range: 0-9990 ppm , 1 ppm Resolution, +/- 2% Readout Accuracy TDS-4TM:ATC (Automatic Temperature Compensation).Measurement Range: 0-9990 ppm , 1 ppm Resolution, +/- 2% Readout Accuracy