Conductivity Meters & Accessories - Page 2

Manufacturer: Hanna Instruments Brand: Hanna Instruments

This tester provides a fast and dependable way to measure the Total Dissolved Solids in your water samples. Operating and routine maintenance is easy. A press of the single button, at the top of the meter, powers it on. Press and hold the button, for a few seconds, to automatically enter the calibration mode. Simply open a sachet of the calibration solution, dip the probe and within seconds the meter recognizes the calibration solution and calibrates itself! Maximum battery life is managed by onboard power microprocessor, which automatically turns meter off after 5 minutes of non use

Manufacturer: PATEA Brand: PATEA Model: 703194299495

Patea TDS-EC: Professional quality combination TDS Meter, TDS EC Meter and Temperature Meter. Ideal for all water quality testing, water purification applications, waste water regulation, aqua culture,hydroponics, laboratory and scientific testing, pools & spas, ecology testing, colloidal silver, water treatment and more. Features: * Lock function - makes it easy to read and record, press HOLD button then remove from test solution. * 4 Display modes: press SHIFT button: TDS - ppm & °C, EC - μs/cm & °C, TDS - ppm & °F, EC - μs/cm & °F. * 5 minute Auto Shut Off feature, so battery won't run down. * Measurement Range: Conductivity: 0 - 9990 μs/cm TDS: 0 - 5000 ppm (parts per million) Degrees Celsius: 0.1 - 80.0°C, Fahrenheit: 32.0 - 176.0°F * Accuracy: ± 2% Usage: 1) Please unplug the electrode sleeve before use 2) Press the switch, place the electrode in the test solution and shake it gently. 3) After the numerically stable, press the "HOLD" button and take it out of the solution to read. Shift between TDS & Conductivity: The factory default TDS data, if the conductivity data of the solution is needed, please touch the SHIFT button, the instrument automatically shifted. Automatic temperature compensation:The instrument with automatic temperature compensation function under measurement mode. Temperature shift:Continuous touch the SHIFT button twice, degrees Celsius and degrees Fahrenheit conversed, the factory default degrees Celsius Note: 1. Avoid heat, direct sunlight. Please adopting standard buffer solution calibration, incorrect calibration would cause measurement error, thus affecting the accuracy of the test solution, or cause the instrument not working properly. 3. Do not thrown the instrument into the test solution to avoid the circuit board short circuit.

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI7030L

Proper calibration of the instrument to sensor measuring system will ensure your results are accurate and repeatable. The use of standard calibration solutions is fundamental for correctly calibrating the measuring system. The Hanna range of conductivity calibration solutions has been produced to ensure the maximum accuracy for conductivity meters and probes. Guaranteed quality. Hanna conductivity meters can be calibrated in a few minutes right in the laboratory or field. For those users that require documented accuracy, conductivity (EC) solutions are available in bottles with certificates of analysis. Hanna solutions are offered in opaque, light-tight bottles that meet FDA requirements. This calibration solution is widely used to assure the proper performance of conductivity meters with a scale higher than 10 microsecond per centimeter. 12880 microsiemens/cm EC value at 25 degree C. 500mL size.

Manufacturer: General Electric Brand: General Electric Model: WR55X11211

This is a genuine replacement part. The model number and name for the following item is: General Electric WR55X11211 Defrost Control Module.

Manufacturer: Anaheim Scientific Brand: Anaheim Scientific Model: P772

The P772 is a wide-range, pocket-sized conductivity meter perfect for use in field environments. Having a rugged, waterproof housing, and replaceable electrodes, this meter will give long durable service. With 10 µS/cm resolution and ±2% FS accuracy, you will have high quality results at your fingertips. Automatic temperature compensation (ATC) adjusts for changes in conductivity due to temperature.

Manufacturer: Atlas Scientific Brand: Atlas Scientific Model: E.C. Stamp vc.x Color: Green

EZO Electrical Conductivity (E.C.) Circuit There are many different brands of conductivity meters on the market today. Some come with custom probes and others can use any off-the-shelf probe. The precision, accuracy, and resolution of these different brands varies as wildly as their price. The Atlas Scientific EZO Conductivity Circuit brings you just that. Whether you are manufacturing robots, process equipment, sensor arrays, or handheld equipment, Atlas Scientific brings you the power and flexibility of a laboratory grade conductivity meter designed exclusively for robotics. Features: The Atlas Scientific EZO class E.C.Circuit is highly sensitive equipment. EZO Electrical Conductivity (E.C.) Circuit offers a full E.C. reading. The Conductivity EZO Circuit can work with any off-the-shelf two conductor conductivity probe from K 0.1 to K 10. The EZO class Conductivity Circuit is specifically designed to be used in robotics applications where the embedded systems engineer requires accurate and precise measurements of Electrical Conductivity (EC), Total Dissolved Solids (TDS), Salinity and Specific Gravity of sea water. The Atlas Scientific EZO class embedded Electrical Conductivity Circuit is capable of connecting to any two conductor conductivity probe EZO Electrical Conductivity Circuit reads conductivity from a conductivity probe, sensor & electrode. This device does not include a Conductivity probe, sensor & electrode. Atlas Scientific is the industry leader in embedded chemical sensing. This highly specialized company focuses all of its resources on manufacturing the best chemical sensors and test chemicals on the market today. Please note: Conductivity probe required, NOT included.

Manufacturer: Thomas Scientific Brand: Thomas Model: 4366

The Thomas 4366 Traceable Conductivity/TDS meter is a waterproof, pen-style instrument designed for easy routing analysis and quality control, with automatic or manual range selection. The LCD screen displays readings in digits that are 0.5” in height, and the meter housing is ABS plastic for durability in harsh laboratory or plant environments. Automatic shutoff after 20 minutes of non-use helps preserve battery life. Conductivity meters are commonly used in the water-quality testing, waste-water treatment, hydroponics, agriculture, and aquaculture industries, in cosmetics manufacturing, and in laboratory research. To ensure accuracy, the meter includes an individually serial-numbered Traceable certificate from a ISO 17025 calibration laboratory accredited by the American Association for Laboratory Accreditation (A2LA). The certificate indicates traceability to standards provided by National Institute of Standards and Technology (NIST). The meter also fulfills requirements for CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, ISO, and federal and state regulations. SpecificationsSpecifications Conductivity range 0 to 1999μS, 0.00 to 19.99mS Conductivity resolution 1, 0.01 TDS range 0 to 1999ppm, 0.00 to 19.99ppt TDS resolution 1, 0.1 TDS factor 0.40 to 1.00, 0.01 increments Temperature compensation Automatic from 0.0 to 50.0 degrees C, with temperature coefficient equal to 0.0 to 4.0% per degree C, 0.1 increments Power source Four 357/LR44 silver oxide batteries Dimensions 6.5 x 1.25 x 1.25” (H x W x D) Weight2.25oz H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Conductivity meters, also known as electrical conductivity (EC) meters, measure the ability of a solution or material to conduct an electrical current. This measurement helps determine if the solution is, for example, contaminated or contains too much saline. In general, ...

Manufacturer: Thomas Scientific Brand: Thomas Model: 4367

Simply turn on, insert, and simultaneously read result and temperature. Easiest unit ever designed for routine analysis and quality control. Elimination of operator technique permits everyone in the lab to report identical readings. Tough, chemical-resistant, waterproof ABS plastic housing assures a long life in severe lab or harsh plant environments. Large 1/2" high LCD digits are easy to read. Dual display shows reading and temperature. Hold button freezes the reading on the display. Arrow keys allow fast setting to calibration standards. Calibration data is saved even when unit is turned off. Instant-response probe and solid-state thermistor provide precise readings. Temperature compensation permits readings to be automatically referenced to the international standard of 25 degree C or user may set a programmable temperature coefficient. To assure accuracy an individually serial-numbered Traceable certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Waterproof unit is 6.5" x 1-2/5" x 1.25", weight is 2.25 ounces. 0.00 to 10.00 ppt and 10.1 to 70 ppt salinity range. 0.01 ppt Resolution. +/-2 percent full scale + 1 digit Accuracy. 32 to 122 degree F Temperature range. 0.1 Degree temperature resolution. +/-0.5 Degree temperature accuracy. 25 degree automatic temperature compensation. Use with calibration standards: 0.20 to 7 percent.

Manufacturer: Milwaukee Instruments Brand: Milwaukee

Milwaukee MC410 Conductivity EC Monitor with Mounting Kit, 0 to 1990 ppm, +/-2 percent Accuracy is designed keeping in mind the latest industry requirements.

Manufacturer: Hanna Instruments Brand: Hanna Instruments

DiST's are rugged and reliable pocket-sized testers that offer quick and accurate readings of conductivity or TDS. The DiST family of testers is widely used for monitoring EC/TDS in drinking water, water conditioning, reverse osmosis, cooling towers, wastewater, laboratories, agriculture, aquaculture and aquariums, hydroponics and the printing industry. This tester features an amperometric graphite electrode that provides better repeatability in measurements since they do not oxidize. An amperometric measurement of TDS is based on Ohm's Law, I = V/R where R depends on the distance between two pins and their surface. Oxidation changes both the distance and surface which will affect accuracy. The DiST's non-oxidizing graphite pins are able to provide an optimal surface for accurate, dependable results. When calibration is necessary, simply submerge the electrode tip into calibration solution and adjust the trimmer on the side of the tester. Range: 19.99 microSiemens/cm. Resolution: 0.01 microSiemens/cm. Accuracy: +/-2 percent F.S. TDS Factor: 0.5. Calibration Solution: HI70039 or HI70030. Calibration: manual, 1 point. Probe: HI73304. Temperature Compensation: automatic, 0 to 50 degree C (32 to 122 degree F). Battery Type/Life: 1.5V (4)/approximate 200 hours of continuous use. Environment: 0 to 50 degree C (32 to 122 degree F); RH max 95 percent. Weight: 3.4 oz. Measures 1-19/32" length by 57/64" width by 6-57/64" height.