Conductivity Meters & Accessories - Page 3

Manufacturer: FLIR Systems Brand: Extech Model: TL625

100MHz High Voltage Oscilloscope Probe,. 100X probe ratio. 1.2 meter cable length. 10M ohm input impedance, 17.5pF Capacitance. 2000V max. and 15 to 35pF compensation range. Includes probe tip, ground lead and adjustment tool.

Manufacturer: Milwaukee Instruments Brand: Milwaukee

Milwaukee MC310 Conductivity EC Monitor with Mounting Kit, 0.0 to 10.0 milliSiemens/cm, +/-2 percent Accuracy offers professional and reliable output.

Manufacturer: Shanghai Sanxin Instrumentation Brand: Apera Instruments, LLC Model: AI314

The Apera Instruments EC60 Pocket EC/TDS/Salinity Tester simply tests all kinds of regular EC measurements in an ACCURATE, QUICK, and RELIABLE manner. The applications include hydroponics, tap/drinking water, pools& spas, education, water treatment, environmental monitoring, etc. Up to 3 points of Auto Calibration with auto buffer recognition and 0 to 50˚C Auto Temperature Compensation (ATC), 0.01 mS/±1% F.S, 0.5˚C accuracy with measuring range of 0-200.0 µS/cm, 0-2000 µS/cm, 0-20.00 mS/cm, 0-50.0˚C. APERA's unique BPB (Brush-Resistant Platinum Black) sensor adopts a special processing technology, which minimizes electrode polarization, expands measuring range, and increases firmness of the electrode, hence ensuring a much higher accuracy and consistency in a wide-range conductivity measurement than traditional stainless steel electrodes, and is easy to clean. The probe is replaceable and easy to install so that you don’t have to buy a whole new meter once the probe retires. Auto recognition and indication of stable values improves consistency, saving you the trouble of guessing when to manually hold measurement. With an large clear 180˚ viewing angle screen with 3 backlit color (blue for measuring mode, green for calibration mode, red for warnings), it supports dual display of temp./EC value and indications of completed calibrations (where M/H indicate 2 points of calibrations) and stable readings (with a smiley face). Easy menu setting, customizing your tester functions according to your needs (switch of temperature unit, TDS factor setting, Switch of salinity unit, auto hold on/off). Smart self-diagnosis, warning of out-of-range/preset measurement and incorrect calibrations. Comes with a complete kit. IP67 waterproof and dustproof, floating on water. 1000 hours' continuous operation powered by AAA batteries (with low power warning and auto power off in 8 min if no operation). Warranty: 2 years for the meter, 6 months for the probe.

Manufacturer: Thermo Scientific Brand: Oakton Model: WD-35662-52

The Oakton 35662-52 Salt Testr is a handheld, waterproof and dustproof pocket meter that measures salinity, floats, if dropped in liquid, is factory-calibrated against sodium chloride (NaCl) standard solution for reliability, and has + or - 1% full scale accuracy. A portable pocket meter is commonly used to measure the salinity of substance, particularly NaCl-based samples, in aquaculture, aquariums, fish farms, food processing, swimming pools, and in environmental and waste water treatment. This microprocessor meter features one-point, push-button calibration located in the battery compartment to avoid accidental recalibration, and has Automatic Temperature Compensation (ATC) for accurate readings in fluctuating temperatures. It has a replaceable sensor to extend the life of the tester. The meter’s waterproof and dustproof housing is Valox resin, and has Ingress Protection (IP) 67-rating for protection against solid objects or liquids. Its stainless steel sensor tip is both durable and chemical resistant. It has a dip-style sensor for immersion. The meter displays full readings to obtain actual test values and to eliminate the need to multiply the readout. It has a dual-display, LCD upright screen to display selectable temperature in degrees C or F. It has a hold function which freezes readings for recording, and an auto shut-off function that automatically turns the tester off after 8.5 minutes of nonuse to extend battery life. A lanyard loop on the top of the battery cap secures attachment. The 35662-52 Salt Testr comes with an integral stainless steel sensor, has ATC from 0 to 50 degrees C (32 to 122 degrees F) with ATC coefficient 2% per degrees C, 1.11% per degrees F, 25 degrees C reference temperature, and an operating temperature of 0 to 50 degrees C (32 to 122 degrees F). Calibration standard range calibrated to 4.4 ppt NaCl. Salinity range is 0 to 10.00 ppt, resolution 0.10 ppt, accuracy 0.00 to 7.00 ppt + or - 1% full-scale, above 7.00 ppt + or - 3% full scale. It comes with a 316 stainless stee...

Manufacturer: Sensorex Brand: Sensorex Model: CS150TC-K=1.0 TC=PT1

Our laboratory/low cost light industrial conductivity sensors feature Graphite or Platinum ring technology. The durable epoxy body construction provides a rugged and dependable sensor for portable and laboratory use. The low cost yet high quality Sensorex conductivity probes are suitable for use with most portable conductivity meters. By adding a simple mounting gland fitting, customers may use these in process applications. Mount them in-line, in a pipe "T" fitting, or submerse them into a tank. Our general purpose models CS150 and CS150TC feature graphite measuring elements and the same durable epoxy body. For many applications, the epoxy body conductivity sensors are the lowest cost, most reliable conductivity sensor to use, especially for process or portable applications. Models CS200 and CS200TC feature platinized measuring surfaces that provide accurate and repeatable measurements. Rugged epoxy bodies make the sensors virtually unbreakable. These are an excellent choice to use as standard laboratory conductivity electrodes.

Manufacturer: COLE-PARMER Brand: Oakton

Use these testers for either cup-style or dip-style measurements. For cup style, pour a small amount of your sample directly into the sensor cup until it overflows; for dip style, simply immerse tester tip into sample. Replaceable sensor lets you reuse meter body many times over. Valox® housing and stainless steel electrodes for good chemical compatibility. Note: Before measuring, calibrate tester as either cup style or dip style (depending on intended method of use). What's Included: protective plastic storage case, lanyard, and batteries Operate as either a cup-style or dip-style tester for greater flexibility Automatically or manually select measuring range Waterproof, dustproof housings float Push-button calibration, HOLD function, and error messages

Manufacturer: Sensorex Brand: Sensorex Model: CS150-K=1.0

Our laboratory/low cost light industrial conductivity sensors feature Graphite or Platinum ring technology. The durable epoxy body construction provides a rugged and dependable sensor for portable and laboratory use. The low cost yet high quality Sensorex conductivity probes are suitable for use with most portable conductivity meters. By adding a simple mounting gland fitting, customers may use these in process applications. Mount them in-line, in a pipe "T" fitting, or submerse them into a tank. Our general purpose models CS150 and CS150TC feature graphite measuring elements and the same durable epoxy body. For many applications, the epoxy body conductivity sensors are the lowest cost, most reliable conductivity sensor to use, especially for process or portable applications. Models CS200 and CS200TC feature platinized measuring surfaces that provide accurate and repeatable measurements. Rugged epoxy bodies make the sensors virtually unbreakable. These are an excellent choice to use as standard laboratory conductivity electrodes.

Manufacturer: Delmhorst Instrument Brand: Delmhorst Instrument Model: 26-ES

DELMHORST INSTRUMENT Slide Hammer with 2

Manufacturer: Paderno World Cuisine Brand: Paderno World Cuisine Model: 49730-00 Color: off-white

This Paderno World Cuisine device instantaneously reads salt content in meat broth preparations, water and sauces, as well as mineral concentration. It also provides temperatures from 0 to 100 degrees Celsius.

Manufacturer: Lamotte Brand: LaMotte Model: 1749-KIT-01

Designed for the pool professional. The tester's probe is dipped into a sample of pool water and the results are ready instantly. The Salt PockeTester measures the Sodium Chloride level in salt water pools with a range from 0 to 9,999 ppm. TDS is measured from 0 to 9,999 ppm and Temperature from 32.0° to 149°F. A memory feature saves up to 25 test results. The PockeTester is packages in a rugged carrying case with a special calibration standard.