Spectrometry - Page 13

Manufacturer: Chemplex Brand: Chemplex Model: 416-PP

Thin-film rolls pre-perforated at 3" lengths are also available for analysts with a preference to continuous rolls and would like the convenience of dispensing pre-cut sections. Simply detach three square inch sections from the bulk roll at the perforations as required. Each roll is 300' in length by 3" wide. A single pre-perforated roll serves to prepare 1200 samples at 3 in2 per sample.

Manufacturer: Markes International Brand: Markes International Model: C-TAGTL

TubeTAG tool, for fixing/removing TubeTAG from metal thermal desorption tubes.

Manufacturer: UNICO Brand: Unico

UNICO Stray Light Check Filter, 220nm, Factory Calibrated S-90-9122

Manufacturer: Globe Scientific Brand: Globe Scientific

Reagent Probe for Hitachi 717 & 914 (with seal)

Manufacturer: Stanbio Brand: Stanbio

Triglycerides LiquiColor® Test (Enzymatic) - Glycerylphosphate Oxidase (GPO) Methodology. Contents: R1: 4 x 30 mL, R2: 1 x 1.8 mL, STD: 1 x 2 mL (200 mg/dL). Ready-to-use liquid reagents

Manufacturer: JYP

Usually the product will be sent in 2-5 working days and takes about 3--9 business days to reach you Size:5*5*5MM Size tolerance: +/- 0.15MM Finish: 40-20 Surface type: Lambda / 4 Wavelength: 400-700NM Four incident planes are coated with AR film,and the slant with spectroscopic film

Manufacturer: Romack Brand: Romack

Manufacturer: Nalgene Brand: Nalgene

Nalge Nunc 4-in-1 EZ Tote Labware Carrier, HDPE, NALGENE 6565-0001 4 In 1 Ez Tote Hdpe CS4

Manufacturer: ASTA Brand: Hudson Surface Tech Model: PFS2409H00 Color: Silver

μFocus targets give you a precisely formed dried droplet spot of predetermined size. You can work with larger (1700-2000 μm) spots and use standard spotting techniques. You can also work with much smaller spots (700-900 μm) that allow you to reduce the amount of matrix used, to maintain optimum matrix to analyte ratio with less concentrated or smaller analyte samples. Many users report 5-10x increases in sensitivity. Because μFocus spots are uniform, you also see improvements in spot-to-spot reproducibility, making quantitative analysis and fingerprint assays more reliable.

Manufacturer: isoSPEC Brand: isoSPEC

isoSPEC lamps are designed and manufactured to achieve all of the following fundamental requirements for a spectral line source. • Intense emission of resonance (ground state derived) lines. • Narrow line width, for maximum sensitivity and linearity. • Minimal spectral interference from continuum emission, present in the cathode. • Rapid warm up to produce stable long term light emission. • Noise free operation and long running life and a 5-year shelf life. • Cathode materials and geometry achieve a combination of spectral purity and a suitable sputtering rate. A high sputtering rate will give high intensity at the expense of lamp life, sensitivity and linearity. isoSPEC lamps have been tested and found to work as well as lamps sold specifically for SMITH-HIEFTJE background correction, however due to the high energy pulse used, some elements will be consumed at a higher rate reducing lamp life.