Spectrometry - Page 79

Manufacturer: Unico Brand: Unico

The Unico Square Polystyrene Cuvette has a 10mm Pathlength, 45mm Height, and works with Visible Light in the 335nm to 1100nm Wavelength Range. Unico Square Polystyrene Cuvette Configuration: S-90-302P-100: Square Polystyrene Cuvette, 10mm Interior Width, 2.5ml Capacity, Box of 100. S-90-302P-500: Square Polystyrene Cuvette, 10mm Interior Width, 2.5ml Capacity, Box of 500. S-90-305P: Square Polystyrene Cuvette, 4mm Interior Width, 1.5ml Capacity, Box of 500. Unico Square Polystyrene Cuvette Literature: Unico Spectrophotometer Catalog

Manufacturer: Veolia Brand: Recyclepak

Dimensions: 2 GallonsInside top diameter of 10.48". Inside bottom diameter of 9.125". Inside height of 7.53" Capacity: 6 atomic absorption lamps. Includes: UN-rated, DOT approved 2 gal container with locking lid, 4 mil poly liner, liner tie, instructions, terms and conditions, proof of purchase, prepaid return shipping with label, recycling and online certificate of acceptance for recycling. Notes: Thorium and uranium lamps cannot be placed into this container. Must be placed into shipping box prior to shipping. Restrictions: LEDs NOT ALLOWED in this container. Lower 48 contiguous states only. Not for export.

Manufacturer: ZYB Brand: ZYB

Usually the product will be sent in 2-5 working days and takes about 3--9 business days to reach you Parameters: Cell Material : Quartz Top Type : Open-top, Teflon lid Light Path: 1.00 mm Cell Volume : 0.35 mL Spectral range : 200-2500 nm Outside Dimensions : 45mm × 3.5mm × 12.5mm

Manufacturer: JYP

Usually the product will be sent in 2-5 working days and takes about 3--9 business days to reach you Size:25.4*1.1MM T：R=50:50 The incident angle: 45 degrees Wavelength: 600-900NM Coating: one side is coated with AR film, the other side with splitting film

Manufacturer: Unico Brand: Unico Model: S-1200-102

The Unico Single Square Cuvette Holder (#S-1200-102) is a single cell holder with a base for 10 mm square cuvettes. The holder is designed for use with S1200 Series Visible Spectrophotometers.

Manufacturer: PROMPTAR CO, LTD Brand: PROMPTAR Model: FX22154BQ

Spectrophotometer Precision Cells of fused quartz or optical glass with precisely parallel walls. Optical Glass for visible light spectroscopy over the wavelength range of 334 through 2500 nm, Far UV Quartz for UV/visible spectroscopy over the wavelength range of 170 through 2700 nm. Cells are guaranteed to transmit >80% in their usable wavelength range. Standard spectrophotometer cells have 2 polished windows (1.25 mm thickness) with other surfaces frosted. Semi-micro cells have 4 mm interior sample chamber width, reducing the amount of sample needed by 60%. Micro cells have 2 mm interior sample chamber width, reducing the amount of sample needed by 80%. Fluorimeter cells have 4 polished windows and polished base.

Manufacturer: Stanbio Brand: Stanbio

LDH Liqui-UV® Test (Rate) - Modified Wacker Methodology

Manufacturer: Stanbio Brand: Stanbio

Gamma-GT LiquiColor® Test (?-Glutamyl Transferase/Rate) - Modified Szasz Methodology

Manufacturer: UNICO Brand: Unico

UNICO Cylindrical Cell Holder Kit for cells up to 100 mm pathlength (22mm diameter)

Manufacturer: Chemplex Brand: Chemplex Model: 107

Microporous Film is a gas permeable membrane that enables the analysis of non-volatile liquid and powdered sample substances in helium flushes or vacuum. Pressure differentials within the sample cup and sample chamber are equalized while maintaining a taut thin-film sample support plane. The Series 1500 XRF Sample Cups are designed for use with Microporous Film. One of two supplied Snap-On Rings included with the 1500 Series Sample Cups is used to attach Microporous Film to the Cell neck of the open end of the sample cup nearest the outer integrated flange. The sample cup Cell is designed with the unique "bead-to-indent" geometry that creates taut thin-film sample support planes and effective seals against leakage. The second included Snap-On Ring is used to affix a thin-film sample support window to the opposite open end of the sample cup. In practice, the illustrated assembly procedure is reversed. The thin-film sample support is attached first enabling one or more sample cups to be conveniently filled from the top end; Microporous Film is attached last. Microporous Film is also available in Easy-to-Use Precut Circles for elimination of trimming and convenience of attachment to Chemplex XRF Sample Cups.