pH Testing - Page 43

Manufacturer: SEOH Brand: SEOH

This is a lightweight and easy to use set for anyone interested in testing the pH of liquids. Features: Fast response combined with reliability and accuracy. Automatic Temperature Compensation. Lightweight and compact. resistant ABS case. Waterproof design, IP-57 Rated. 1 or 2 points, manual calibration via screw trim pot. The electrode module is exchangeable for replacement by user. Specifications: Range: 0-14.0. Accuracy: +/-0.1+1 Digit. Resolution: 0.1pH. Battery: 3V (x2) CR2032 Lithium (included).LCD Dimensions: 0.83 x 0.71 Inches (21 x 18mm) Unit Dimensions: 6.22 x 1.57 x 1.34 Inches (158 x 40 x 34mm). Case Dimensions: 6.50 x 3.94 x 1.57 Inches (165 x 100 x 40mm). Total Weight: 0.19 lbs (85g). Includes: Meter. Standard Solution. 9V Battery. Screwdriver. Operation Manual.

Manufacturer: Ohaus Brand: Ohaus

Convenient salinity testing with an economical solution! This simple-to-use salinity pen meter offers fast and accurate results. With it, you can measure a sample?s salinity, or dissolved salt content in a liquid, using just one hand! The meter is designed with durable IP67 waterproof housing, protective cap that safeguards the sensor, and automatic shutdown to preserve battery life. It also comes with a storage case and wrist strap. ATC Without Temperature DisplayAutomatic Shutdown After 6 Minutes of Non-Use

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI98308

Pure Water Test (PWT) enables users to check the purity of your distilled or demineralized water in laboratory or industrial environments. PWT is suited for fields such as printed circuit board washing, laundry, steam cleaning, checking car battery water and all areas where distilled, demineralized or pure water is used. This tester is housed in a durable case that provides excellent protection against harsh industrial environments. Range: 0.0 to 99.9 microsiemens/cm. Resolution: 0.1 microsiemens/cm. Accuracy: +/-2 percent F.S. Calibration: manual, 1 point. Temperature Compensation: automatic, 0 to 50 degree C (32 to 122 degree F). Battery Type/Life: 4 by 1.5V/approximate 250 hours of continuous use. Environment: 0 to 50 degree C (32 to 122 degree F); RH max 95 percent. Weight: 3.4 oz. Measures 1-19/32" length by -57/64" width by 6-57/64" height.

Manufacturer: Sensorex Brand: Sensorex Model: SDA-7003

The sda-7001 replacement salt bridge extends the lifetime of the SD7000/SD7500/SD7420 pH and ORP (redox) sensors. SDA-7003 is a Pack of three (3) sda-7001 salt bridges. Order sds-7015 or sds-7025 (standard cell refill solution) when replacing salt bridges. Also compatible with some sensors from other brands, including Hach and water Analytics. Hach is a registered trademark of danaher. Water Analytics is a registered trademark of water Analytics. No affiliation, endorsement or sponsorship is stated or implied.

Manufacturer: LaMotte Company Brand: LaMotte Model: 1196U51EA

The PockeTester pH/Conductivity tracer measures five parameters including conductivity, TDS, salinity, pH and temperature using one electrode. Units of measure are pH, µS, mS, ppm, ppt, mg/L, g/L, °C and °F. Its memory stores up to 25 data sets with adjustable conductivity to TDS ratio. The device features auto power off and low battery indicator and is waterproof to IP67.

Manufacturer: Control Wizard Products

Control Wizard Products is now introducing its Accurate pH 7 pH-moisture meter for soil growers. Until now, soil growers with the need to keep careful tabs on the pH of their soil have had to rely on either cheap and hokey junk meters or meters that are very expense and hard to get. This new meter is the best of both worlds. It is relatively inexpensive and is manufactured to high quality standards. Operation is simple. It works by utilizing the electronic ground field effect of the earth and two dissimilar metals. No batteries are required. 6 month limited warranty.

Manufacturer: COLE-PARMER Brand: Cole-Parmer

Note: half-cell electrodes must be used with reference electrodes.

Manufacturer: Teika Brand: Outdoor Sport

TeikapH Meter is professional and ideal tool for you testing your water level. The cap keeps the sensor moist when stored upright, and can be used as a container for sensor-conditioning. Steps 1: Turn on pH meter, Clean the electrode in distill water 2: Immerse the electrode in pH 6.86 standard buffer solution 3: Reset with screwdriver, until the display digital is 6.86pH. Then complete pH 6.86 calibration 4: Clean the electrode in distill water and dry it, immerse the electrode in Ph 4.00 standard buffer solution 5: Reset with screwdriver, until the display digital is 4.00pH. Then complete pH 4.00 calibration 6: Clean electrode and dry it, put the meter into PH 9.18 standard buffer solution. Check if reading is correct between 9.17-9.19pH Specifications - Measuring range: 1-14 pH - Resolution: 0.1 PH - Batteries: 4x 1.5V LR44 button cell (AG13) - Adjustment: trimmer potentiometer - Automatic temperature compensation: 0-50°C (32-122°F) - Dimensions: 151mmÃ-33mmÃ-20mm - Weight: 53g Package includes - 1 x pH Meter - 1 x Carrying case - 1 x Adjustment screwdriver - 2 x Calibration packets - 1 x User's manual

Manufacturer: COLE-PARMER Brand: Cole-Parmer

All-in-One" electrodes offer versatility and customization. These electrodes combine the pH reference, pH half-cell, and temperature sensor in one 12mm-diameter electrode body. The seven designs allow you to select between low-maintenance, sealed electrodes or clog-resistant refillable electrodes. Tuff-Tip electrodes feature a semi-domed tip which protects the pH bulb and ensures a quick response in harsh and dirty samples. PBR-style electrodes provide predictable, reliable, and quick responses-no matter what the sample temperature. This design virtually eliminates drift, accuracy problems, and premature performance losses due to temperature. All electrodes include 3-ft cable and connector for pH, except where noted. Save money without giving up temperature compensation! Electrodes designed to work with meters you already have Seven different designs available-find the design that works best for your application without losing automatic temperature compensation

Manufacturer: Wildlife Supply Company Brand: Wildlife Supply Company

Test for pH right in the field or lab with this lightweight, waterproof, 100% buoyant pH tester. We call it electronic paper since it is far more reliable and versatile than old-fashioned pH paper. Battery operated for portability with about 250 hours of continuous use. Accurate to + 0.05 pH over 0 - 50° C.Two point calibration and auto shut-off. 163 x 40 x 26mm (6.4 x 1.6 x 1”). Ship wt: 85 g (3 oz) • Range: 0.00 - 14 pH • Resolution: 0.1 pH • Accuracy: +/- 0.1 pH • Operating Temperature: 0 - 50° C • Calibration: 2 points • Power supply: DC 4 x 1.5 v (button battery)