Electrodes - Page 37

Manufacturer: Oakton Brand: Oakton Model: WD-08516-85

Oakton WD-08516-85 Bolt-on Surface Thermocouple Probe, Type K, -418°F to 900°F Temperature Range.

Manufacturer: Bluelab Corporation Limited - Import (NZ) Brand: Bluelab Model: PROBPH

The Blue lab pH Probe is a replacement pH probe suitable for use with Blue lab products that test the pH value of a solution. Unfortunately pH Probes do not last forever as they age through normal use and will eventually fail. With good care and use (keeping the probe tip wet and cleaning once a month) you will extend its life. The Blue lab pH Probe has a Double Junction Reference which provides a longer life than many other pH probes and is a gel filled non-refillable probe, so apart from cleaning is maintenance free. Replace only the pH probe, not the whole meter.

Manufacturer: Sper Scientific Brand: Sper Scientific Model: 840049

Sper Scientific 840049 Spear Tip pH Probe (for non-liquid measurement) For use with the following meters: 840087, 850055, 850060, 850081, 860031, 860033.

Manufacturer: COLE-PARMER Brand: Myron L

Easy-to-replace sensor heads Sensor head has a 6 month limited warranty

Manufacturer: Control Wizard Brand: Control Wizard

This pH Electrode replaces the unit that ships with the Control Wizard 24/7 Three-In-One Meter.

Manufacturer: Mettler Electronics Brand: Caputron Model: C-MEE2004

Mettler Electrodes are comprised of a sponge with a metal backing, all enclosed within a rubber casing.

Manufacturer: TWECO Brand: Tweco

Electrode Holder, 300 Amps Ac, Material Copper Alloy, Cable Connection 2/0, For Use With Stick Welding Electrodes, Size L 10, Features 6-Position Jaw, Ball Point Connection.

Manufacturer: Surgpoint Brand: Surgpoint

Ultra fine tip 99.95% Etched Tungsten Needle/Pin/Probe/Electrode Ideal for Electro Micro-dissection, As an Ion Emitter, LED testing, LCD testing, Static discharge, Jewelry Watch and Clock repair, Laboratory work or General industrial use. Also used with any standard Pin holder or Pin vise. ISO 13485 Certified, Laser inspected for a consistent tip radius, Tungsten's extremely high melting point of 3400 C Helps maintain sharpness for extended use. Total Length- 1.5" Inches or 37 Millimeters Rod Diameter- .030" Inches or .75 Millimeters Point/Tip Radius- 3 Microns or 0.003 Millimeters

Manufacturer: YSI Brand: YSI

The YSI 605377 100-1 is a pH and temperature sensor for the YSI pH100 meter and has Automatic Temperature Compensation (ATC) and a 1m (3.3') waterproof cable. A pH electrode is commonly attached to a pH meter to measure the pH of a substance such as water, food, beer, or wine in lab, industrial, and food applications. This electrode provides ATC with an internal thermometer sensor for accurate readings in fluctuating temperatures. The meter comes with a 1m (3.3') waterproof cable for immersion in liquids.SpecificationspH range-2 to 16ATC temperature range-10 to 120 degrees C (14 to 248 degrees F) Operating temperature0 to 50 degrees C (32 to 122 degrees F)An electrode, also called a sensor or probe, is an instrument used with a meter to test and measure parameters of a substance. All electrodes are probes or sensors, but not all probes are electrodes or sensors. Probes, such as temperature probes, are used to penetrate a material for measurement. Common electrode types are pH, total dissolved solid (TDS), and ion selective electrode (ISE). Electrodes can be half-cell or full-cell (also called combination) types. They can be refillable or non-refillable. Housing material is typically glass or epoxy, and sensors are commonly made with stainless steel or a glass bulb. pH electrodes, which measure the pH of a substance, often have a glass bulb. The bulb senses hydrogen ions, and generates a millivoltage that is picked up by the filling solution and transferred to a wire that connects to the pH meter. Ion selective electrodes (ISEs) respond selectively to ions in the presence of other ions. Electrodes are commonly used by researchers, manufacturers, and hobbyists in a wide variety of industries, such as aquaculture, agriculture, chemistry, food and beverage, wine-making and water-testing, and for scientific applications. An electrode can be used with a datalogger to assist in temperature measurement.YSI manufactures instruments, sensors, and software for environmental water quality monitoring and testing. The company,...

Manufacturer: Sensorex Brand: Sensorex Model: SG201CD

Most pH measurements can be made with single junction reference electrodes. However, materials such as heavy metals, proteins and sulfides can precipitate at the junction. Double ction designs use a buffering salt such as KNO3 in the lower chamber contacting the sample, and preventing these reactions. They are also useful for pH measurement of tris buffers. Both ombination or separate reference electrodes are available from Sensorex