Viscometers - Page 18

Manufacturer: BYK-Gardner USA Brand: BYK-Gardner Model: 8207

BYK-Gardner Dip Viscosity Cups (Zahn Type) may be used anywhere - in shops, factories and laboratories - for quickly checking and adjusting the viscosity of many different types of liquids. Each cup has a 12-inch loop handle to allow the cup to be dipped by hand into a liquid container. At the center of this handle is a finger-ring for holding the cup in a vertical position during use. Results should be reported in Zahn-Seconds at a specified temperature for a particular cup. To convert Zahn-Seconds to centistokes, refer to ASTM D 4212.

Manufacturer: KUNHEWUHUA Brand: KUNHEWUHUA

Product Characteristics: The direct use of glasses lens or an existing template to produce optical lenses as the benchmark standard template,whether new or repair glasses can be applied. 1. Lens clamping device, easy for operation. 2. With three suction cup of Takubo, Briot and Topcon, easy to swap for a different lens edger. 3. Cutting templates speed quickly and processing accurately Technical Parameters: Power Supply: AC 110 V, 60 Hz; AC 220 V, 50 Hz Power Consumption: 50 W Dimensions: 34x 21 x 19 mm Weight: 4 kg Attention: The voltage could be 110 V/60 Hz or 220 V/50 Hz. We will ship the product with voltage standard in the recipient's country. If you have any questions, please send a message to tell us. NOTE: we have both 110V version and 220V version for this item, please kindly which one do you need so we can arrange the shipment as soon as possible, thank you! If you do not leave a message to us, we will ship the item as your country's standard voltage Stock up time：2 days you will receive it within 5-9 working days.

Manufacturer: BYK-Gardner USA Brand: BYK-Gardner Model: 8304

BYK-Gardner offers the EZ and Signature brand zahn cups. These cups are also widely used for many industrial applications.

Manufacturer: Cannon Instrument Brand: CANNON Instrument

The Cannon BS/IP/SL(S)-7 suspended-level viscometer has a 200 to 1,000 centistokes (cSt) viscosity measuring range and is suitable for the measurement of transparent Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 1.0 centistokes per second (cSt/s) for calculating kinematic viscosity of sample sizes as small as 11mL. The BS/IP/SL(S)-series size 7 viscometer uses a 250mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing. It includes an ASTM International certificate of calibration. This calibrated suspended-level viscometer meets the ASTM International D446 standard for suspended-level viscometers and the D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant qu...

Manufacturer: COLE-PARMER Brand: Cannon

These CANNON glass capillary viscometers let you determine viscosities using ASTM testing methods. Each viscometer on this pages comes with a calibration certificate that includes the viscometer constant and formulas for calculating viscosities, plus instructions for the proper care and use of your viscometer. Zeitfuchs® Cross-Arm Viscometers. Use to determine kinematic viscosities of transparent and opaque Newtonian liquids. Require a 1- to 3-mL minimum sample volume. Precision is ±0.3%.

Manufacturer: Thomas Scientific Brand: BYK-Gardner Model: 172

The BYK-Gardner 172 Ford viscosity cup has a 25 to 120 centistokes (cSt) viscosity range and is suitable for testing fluids such as paints and lacquers. The number 2 aluminum flow cup has a stainless steel orifice with a 0.10-inch diameter. Efflux times range from 30 to 100 seconds. It includes an ASTM certificate. This Ford viscosity cup is calibrated against National Institute of Standards and Technology (NIST) for testing standard oils and meets ASTM International D1200 standard for testing viscosity, ASTM D333 standard for testing paints, and ASTM D365 standard for testing nitrocellulose lacquers. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications. Some viscometers are manufactured to meet industry or governmental standards, including Ingress Protection (IP), National In...

Manufacturer: BYK-Gardner USA Brand: BYK-Gardner Model: 7532

The CAP Spindle #2 is an accessory for the Cone and Plate Viscometers.

Manufacturer: Tathastu Brand: Tathastu

Tathastu Very Good Quality Saybolt Viscometer

Manufacturer: GSS Brand: GSS

GSS Very Good Quality Saybolt Viscometer

Manufacturer: MG Scientific Brand: MGM

Owing to the monumental demand of our prestigious clients, we manufacture, supply and export Redwood Viscometer. These products are used in different laboratories for measuring the viscosity of varied kinds of fluids. Owing to their longer service life, less maintenance and corrosion resistance surface, these products have gained a huge demand among our clients in the global arena. Redwood Viscometer is delivered to the clients in a committed time frame owing to our diligent carriage and freight agents.Features of Redwood Viscometer Machines:- Require Minimum Distortion and are the perfect solution to all the problems.Excellent PerformanceRobust Construction