Viscometers - Page 28

Manufacturer: Cannon Instrument Brand: CANNON Instrument

The Cannon ZCAC-RO-7 Zeitfuchs cross-arm viscometer has a permanently attached 51mm diameter round metal holder and a 600 to 3,000 centistokes (cSt) viscosity measuring range. It is suitable for the measurement of either transparent or opaque Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 1.0 centistokes per second (cSt/s) for calculating kinematic viscosity of sample sizes as small as 1.0mL. The ZCAC-RO-series size 7 viscometer uses a 230mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. It includes an ASTM International certificate of calibration. This calibrated capillary-style viscometer meets the ASTM International D446 standard for viscometers and the D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity me...

Manufacturer: BYK-Gardner USA Brand: BYK-Gardner Model: 0172

Ford viscosity cups have been produced by Gardner Laboratory. Each cup produced has been in Conformance with viscosity cup flow characteristics. They are calibrated against standard oils referenced to certified NIST (National Institute of standards and technology) oils. The cups are for low viscosity liquids, their Body made of solid bar aluminum and have a Stainless steel orifice. The Ford viscosity cups are d to be within 3 percent (drain time of calibration oil) throughout the recommended use range.

Manufacturer: BYK-Gardner USA Brand: BYK-Gardner Model: 0650

BYK-Gardner bubble viscometers are used to quickly determine kinematic viscosity of known liquids such as resins and varnishes. The time required for an air buble to rise is directly proportional to the viscosity of the liquid - the faster the bubble rises, the lower the viscosity. BYK-Gardner bubble viscometers come in lettered tubes A5 through Z10 in four different tube sets covering viscosity ranges from 0.05 to 1,000 stokes.

Manufacturer: Thomas Scientific Brand: Lauda-Brinkman Model: EKS 069

Lauda-Brinkmann manufactures thermostats, constant temperature equipment, and analytical measuring devices for the pharmaceutical, research, and semiconductor industries. The company, founded in 1956, is headquartered in Lauda-Konigshofen, Germany.

Manufacturer: Thomas Scientific Brand: Thomas

Manufacturer: BYK-Gardner USA Brand: BYK-Gardner Model: 0560

The BYK-Gardner 0560 bubble viscometer tube set has a 9mL capacity and a 406 to 1,190 stokes viscosity range, and is suitable for testing fluids such as resins and varnishes. The set includes 4 sealed bubble tube standards, lettered in the Z7 through Z10 range and two grade A sample testing tubes with cork stoppers. Sample fluid viscosity is determined by comparing bubble rise time to those of bubble tube standards and choosing the closest match. The sealed standard tubes have a 15-year shelf life and can be National Institute of Standards and Technology (NIST) recertified. This bubble viscometer tube set meets ASTM International D1545 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications. Some viscometers are manufactured to meet industry or gov...

Manufacturer: BYK-Gardner USA Brand: BYK-Gardner Model: 7563

The CAP Spindle #10 is an accessory for the Cone and Plate Viscometers.

Manufacturer: MG Scientific Brand: MGM

Owing to the monumental demand of our prestigious clients, we manufacture, supply and export Redwood Viscometer. These products are used in different laboratories for measuring the viscosity of varied kinds of fluids. Owing to their longer service life, less maintenance and corrosion resistance surface, these products have gained a huge demand among our clients in the global arena. Redwood Viscometer is delivered to the clients in a committed time frame owing to our diligent carriage and freight agents.Features of Redwood Viscometer Machines:- Require Minimum Distortion and are the perfect solution to all the problems.Excellent PerformanceRobust Construction

Manufacturer: MG Scientific Brand: MGM

SpecificationOwing to the monumental demand of our prestigious clients, we manufacture, supply and export Redwood Viscometer. These products are used in different laboratories for measuring the viscosity of varied kinds of fluids. Owing to their longer service life, less maintenance and corrosion resistance surface, these products have gained a huge demand among our clients in the global arena. Redwood Viscometer is delivered to the clients in a committed time frame owing to our diligent carriage and freight agents.Features of Redwood Viscometer Machines:- Require Minimum Distortion and are the perfect solution to all the problems.Excellent PerformanceRobust Construction

Manufacturer: MARS Brand: Mars

Owing to the monumental demand of our prestigious clients, we manufacture, supply and export redwood viscometer. These products are used in different laboratories for measuring the viscosity of varied kinds of fluids. Owing to their longer service life, less maintenance and corrosion resistance surface, these products have gained a huge demand among our clients in the global arena.Features of redwood viscometer machines:- Require minimum distortion and are the perfect solution to all the problems. Excellent performance Robust construction