Multiparameter Meters - Page 13

Manufacturer: Hanna Instruments Brand: Hanna Instruments

The HI 931100N is a portable, water-resistant, ion-selective meter that uses the FC300B sodium electrode to read the salt (NaCl) content of solutions, and is suitable for lab or field use. One or two point calibration is automatic at 3.00 g/L and either 0.30 g/L (low range) or 30.0 g/L (high range). The meter measures four salinity ranges and auto ranges from sample to sample, allowing a wide range of measurements without recalibration. The HI 7662 temperature probe provides temperature readings from 0 to 80 degrees C. The FC300B and HI 7662 are sold separately, and are replaceable, which prolongs the life of the meter. If batteries become weak the large, dual-LCD display will notify the user. Salinity range is 0.150 to 1.500; 1.50 to 15.00; 15.0 to 150.0; 150 to 300 g/L NaCl + or – 5% of reading (NaCl) at 20 degrees C, with a resolution of 0.001; 0.01; 0.1; 1 g/L NaCl. Temperature range is 0.0 to 80.0 degrees C + or – 0.5 degrees C, with a resolution of 0.1 degrees C. Input impedance is 1012 Ohm and the device operates on four 1.5V AA batteries. Dimensions are 196 x 80 x 60 mm/7.7” x 3.1” x 2.4” (H x W x D), and weighs 500 g (1.1 lb.). Salinity and sodium content measurement instruments are commonly used by researchers, manufacturers, and individuals to measure salt and sodium levels of a substance. Hanna Instruments manufactures analytical instrumentation and supplies, including pH meters, electrodes, chemical reagents, and buffer solutions. The company, founded in 1978 and headquartered in Woonsocket, RI, meets International Organization for Standardization (ISO) 9001 standards. What’s in the Box? HI 931100 9V Battery Instructions Carrying case

Manufacturer: HACH Brand: Hach Company Model: H170NP

The H-Series handheld meters are dual-technology pH (non glass "ISFET" and traditional glass). These rugged meter systems showcase a large LCD display with LED backlight, and have the ability to accurately measure pH(ISFET or glass), mV, Temperature, ORP, and ISE. These ultra-modern waterproof handheld meters are engineered to give years of reliable service in the most of difficult applications.

Manufacturer: Thermo Scientific Brand: Thermo Scientific Orion Model: STARA3240

The Thermo Scientific Orion Star A324 portable meter displays pH, ISE (ion selective electrode), and mV readings plus temperature on the large, backlit LCD display for water, waste water, food and beverage, research, and QA/QC laboratory applications. Electrode status, time, date, sample ID, user ID, and calibration points are also displayed with the measurements. The meter is designed for ease of use and reduced training requirements, with clear screen prompts, updateable soft keys, and an interface that supports English, Spanish, French, Italian, German, and Chinese. A pre-programmed auto-read function is available to lock stable readings on the screen, with an indicator alert that signals when the reading is stable. The meter can also be set for timed readings that gather data at specific time intervals. Non-volatile memory holds up to 5,000 data points with time and date stamp. Updates for meter software and complimentary data analysis software are available for download.pH calibration is available up to five points, with automatic recognition for USA/NIST and DIN (Deutsches Institut für Normung) buffers. ISE calibration is available up to five points, with advanced features that include timed end point, linear point-to-point, non-linear selectable auto-blank and low-concentration range stability. Errors can be fixed without a complete recalibration by using the calibration editing function.The kit includes an Orion ROSS Triode 3-in-1 pH/ATC probe, protective armor with electrode holder for the meter, a hard carrying case, electrode storage solution, pH buffer solution, and pH rinse solution.The meter housing has an IP 67 rating for protection against dust and short periods of immersion in water. Meter input ports include Bayonet Neill-Concelman (BNC), reference pin, and 8-Pin Mini-DIN. Output ports include RS-232 and USB. Certifications for this meter include CE, TÜV, and FCC Class A limits.SpecificationspH range-2.000 to 20.000 pHpH relative accuracy+ or - 0.002 pHISE range0 to 19,999 in ppm, M, mg/L,...

Manufacturer: NDS Brand: Hancor Model: 0663SDG

Made of highest quality structural foam polyethylene with uv inhibitor. for use in all areas of vegetation and trees. use in non-traffic areas where lawn mowers are excluded. 6" fits 6" s/ d pipe fittings, 6" bellend, 6" corrugated and 6" catch basins. open surface area 23.91 sq.in. 5/16" grate opening.

Manufacturer: Frentaly OEM Brand: HM Digital Color: Beige

Get accurate TDS measurement easily antwhere anytime HOW TO CALIBRATE • The meter take Virtual resistor calibration, It is convenient. In normal, it doesn't need to calibrate. If you want more accurate, you can calibrate it follow below: • 1: You need one accurate meter as sample, and make up 342ppm NaCl solution (or you can use the TDS calibration fluid) • 2:Pull sample meter and this meter in 342ppm NaCl solution, set this meter • 3: Hold TEMP button 3-5 second until the record flash on the screen • 4: TEMP button is down, and HOLD button is up, adjust the record the same as the sample meter   TIPS •Once the readout stabilizes(in 10 second),hold button to view out of the water • If the tester displays a flashing "X10" icon, multiply the reading by 10 • Don't drop the entire tester in the water or dip beyond the maximum "2" level • Tester is not meant to be used in hot water (More than 99 degrees) • How to Clear: Press "ON/OFF" twice, clear the data for each test, if you want test continuously Specifications: • Measure Range: 0-9990 ppm; 0-99°C; 32-212 • Accuracy: 2% full scale, +-2℉; +-1℃ • Auto shut-off: 10 minutes • Automatic Temperature Compensation: 0-50℃/ 122℉ • Battery: 2 X 1.5V (LR44 Included) • Size: 156 X 30X20 mm/6 X1.2 X0.8 inch What is included in this package? • Package include: 1 TDS meter, 1 Instruction, 1 Mudder Package

Manufacturer: HM Digital, Inc. Brand: HM Digital Model: HM-DIGITAL-TDS-4 Color: Brown

Product Description: How Pure is Your Water? A TDS meter (aka ppm pen, nutrient tester, tds stick) is an inexpensive and convenient digital tool to instantly check your overall water quality. TDS = Total Dissolved Solids, which is any salt, metal or mineral in the water. With the push of a button, the TDS-4 can tell you your overall water purity level, which will be displayed on the screen in ppm (parts per million). The lower the TDS level, the purer the water, with 0 ppm being pure H2O. The TDS-4 is great for checking your tap water quality, or knowing when to change a filter. (The meter does not test for biological contaminants.) The TDS-4 is a great tool for drinking water, water filtration and purification, hydroponics (test your nutrients), colloidal silver, aquariums, RO/DI systems, pools and spas, and more.

Manufacturer: NEWGATE Brand: i-mesh-bean Model: 109-4002-4003

Manufacturer: HM Digital Meters Brand: HM Digital Meters

PH-80 Features: -TDS controller. -Electrical Conductivity Range: 0-9999 ?S.. -Temperature Range: 0-80 degrees C; 32-176 degrees F.. -Resolution: 1 ?S.. Generic Dimensions: -9'' H x 5'' W x 1'' D, 0.14 lb. Dimensions: Overall Product Weight: -0.14 Pounds.

Manufacturer: Extech Instruments Brand: Extech Model: EX210T

Autoranging Multimeter with 2000 Count Large LCD Display and Infrared Thermometer.

Manufacturer: Autonics Brand: Autonics USA, Inc

Meter, AC Volts, LED, W72xH36mm, 4-Digit, 0-500V Input, Indication Only, 100-240 VAC