Multiparameter Meters - Page 20

Manufacturer: Oakton Brand: Oakton Model: WD-35630-54

These pH/conductivity/temperature probes were specially engineered with a slim design so you can use the pH/CON 10 meter to test ground water. Probes measure only 1.7" (4.3 cm) dia and easily fit into 2" (5.1 cm) well heads.

Manufacturer: Hydro Brand: Hydro Model: HI9813-6

The HI9813-6 is an economical, water resistant, portable meter that measures pH, conductivity (EC), total dissolved solids (TDS) and temperature with a single probe. The HI9813-6 features the Hanna Instruments CAL Check that will allow the user to know when the probe needs to be calibrated or replaced. The meter operation is simplified with dedicated buttons for measurement modes to be displayed on the LCD and knobs for single point calibration of pH and EC.

Manufacturer: Thermo Scientific Brand: Thermo Scientific Orion Model: STARA2160

The Thermo Scientific Orion Star A216 benchtop meter displays pH and dissolved oxygen readings plus temperature on the large, backlit LCD display for biochemical oxygen demand (BOD) analysis, wine and beer testing, and water and waste water analysis. The meter can display temperature with pH/mV/RmV results, dissolved oxygen (DO) in percent saturation, concentration results with temperature, or all results at once. Electrode status, time, date, sample ID, user ID, and calibration points are also displayed with the measurements. The meter is designed for ease of use and reduced training requirements, with clear screen prompts, updateable soft keys, and an interface that supports English, Spanish, French, Italian, German, and Chinese. A pre-programmed auto-read function is available to lock stable readings on the screen, with an indicator alert that signals when the reading is stable. The meter can also be set for timed readings that gather data at specific time intervals. Non-volatile memory holds up to 2,000 data points with time and date stamp. Updates for meter software and complimentary data analysis software are available for download.DO results are enhanced with automatic temperature, manual salinity, and automatic or manual barometric pressure compensation. DO calibration can use water-saturated air, air-saturated water, a Winkler titration, or zero point calibration. The DO probe provides 90 percent of final value in 10 seconds, 95 percent in 15 seconds, and 99 percent of final value in 60 seconds, with 10 cm/sec minimum sample flow. The probe has Automatic Temperature Compensation (ATC) and a screw-on membrane cap to simplify assembly and reduce probe servicing time. The DO probe has a Mini-DIN (Deutsches Institut für Normung) connector and 1.5m/4.9ft. cable.The meter has an IP 54 rating for limited ingress of dust and protection against water splashes. The device can be wall-mounted if table space is an issue. The electrode arm (included) can be attached to either side of the instrument. Meter input po...

Manufacturer: Hanna Brand: Hanna Instruments

HI 981402 is a water-resistant pH meter with a built-in 3� digital LCD. The meter is supplied with the HI 1286 double-junction, plastic-body, gel-filled combination pH electrode with a flexible 2 meter (6.6') cable. The BNC connector is protected by a waterproof sheath. The electrode also has a unique clog-resistant Teflon diaphragm that enhances both probe life and accuracy.The alarm set point can be selected anywhere in the 3 to 11 pH range. A red LED warns the user in the event the reading is outside the set point by more than �0.5 pH. Calibration can be manually performed at 1 or 2 points through two easily accessible trimmers on the front of the unit.The meter is suited for outdoor installations and highly humid environments. The casing has been specifically designed to sit out of the way and provide maximum stability while preventing rolling from any surface. In addition, the molded keyhole holder allows the meter to be installed close to the sample. The 12 Vdc power supply is ideal for continuous monitoring over extended periods of time.

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI991300

The Hanna Instruments HI991300 is a portable pH, Conductivity, total dissolved solids, and temperature meter is ideal for a wide range of applications. The HI991300 has only two buttons making it simple to use.

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI7609829-2

The Hanna Instruments HI 7609829-2 dissolved oxygen sensor with O-ring is a thin, gas-permeable membrane sensor that detects dissolved oxygen (DO) concentration in water samples. The sensor is designed for use with the HI 9829 or HI 98290 GPS multiparameter meter and a compatible digital probe in environmental monitoring. DO concentration values are based on the percentage of dissolved oxygen saturation, temperature, salinity, and atmospheric pressure. DO readings are compensated for the effects of temperature (using the probe's built-in temperature sensor) and atmospheric pressure (using the meter's internal atmospheric pressure sensor).The sensor is field replaceable and easy to attach, with color-coded screw-type connectors. It has a double-junction connector and a solid gel-filled reference electrode to increase resistance. The HI 7609829-2 sensor measurements comply with standard methods 4500-0 G and EPA article 360.1.SpecificationsDissolved oxygen range0.0 to 500.0%0.00 to 50.0mg/LResolution0.1%0.01ppm (mg/L)Temperature range-5 to 55 degrees C/23 to 131 degrees FDepth rating20 m/65ft.Dimensions99 x 17mm/3.9 x 0.66 inches (H x W)H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right.A multiparameter meter is a benchtop or handheld device that can take multiple readings on a single sample. It measures parameters such as the pH level (acidity or alkalinity of a substance), conductivity (the amount of salts or other compounds present in water), dissolved oxygen (DO, the amount of oxygen in a liquid), temperature, total dissolved solids (TDS, anything present in water other than the pure water molecule and suspended solids), salinity, resistivity, and oxidation reduction potential (ORP). Applications for multiparameter meters include water testing, pharmaceuticals, agriculture, winemaking, water-treatment plants, and aquaculture. Devices with a benchtop body are often used for indoor laboratory use or in a manufacturing setting; handheld, portable ...

Manufacturer: Autonics Brand: Autonics USA, Inc

Meter, AC Amps, LCD, 1/32 DIN, 4-Digit, 0-5A Input, Relay output + Transmission output (DC4-20 MA), 12-24 VDC

Manufacturer: Sper Scientific Brand: Sper Scientific

Water Quality Meter pH Kit- Includes everything needed for immediate field use as a pH meter: Water Quality Meter 850081 (which already has a built in BNC connector); epoxy body sealed reference combination electrode with a BNC connector and a 2½" cable; pH Probe 840016; ATC Temperature Probe 850082; instructions, pH buffers 4, 7, & 10, deionized water; calibration tool; and a 9V battery. All of these are contained in the meters own slim but protective hard-shell, foam-lined case. Kit Dimensions: 11" × 9½" × 2" (279 × 241 × 51 mm) Water Quality Meter – 850081(to purchase the Water Quality Meter without the kit, click here) Using interchangeable probes, this versatile meter reads PH, mV, conductivity, TDS, DO temperature and ORP. The user can order probes for only the parameters currently required, and add additional probes in the future. Intelligent probes electronically retain calibration information. No recalibration is required when changing probes. The display simultaneously reads temperature in user selectable °C & °F, and all measurements are automatically temperature compensated. RS232 port enables communication with a computer. Also features auto power off, hold, min/max, fold-out easel back and a tripod screw. Comes with 9V battery and a hard-shell, foam-lined carrying case with room for one or two probes.

Manufacturer: Ohaus Brand: Ohaus Model: 30057496

The Ohaus Starter 2100 bench meter is the cost-effective choice to provide reliable pH, mV and ORP results again and again. The 2100-F offers automatic and manual temperature compensation and includes a built-in adjustable electrode arm, auto buffer recognition, 1 pre-defined buffer group, attached quick reference guide, 2-in-1 plastic, refillable pH electrode, temperature probe and pH buffer powder sachet. ORP electrode sold separately.

Manufacturer: Azzota Brand: Azzota Model: PHMV-1

Benchtop pH/mV Meter (ELECTRODE included), pH Range: 0.00-14.00pH, mV Range: 0 to +/-1999mV.