|
|
-
4.8 of 5.0 with 34 Reviews
SALE PRICE: $105.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 614204-541
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 614204-541
|
The Mitutoyo grade AS-1 square gage block is made of steel, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade AS-1 gage block is commonly used for workshop and inspection applications to calibrate fixtures and precision instruments, to inspect a variety of tools such as mounting tools, cutters, fixtures, and mechanical parts, and for gage manufacturing applications. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.95 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks ...
-
4.8 of 5.0 with 17 Reviews
SALE PRICE: $106.00
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 614201-521
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 614201-521
|
The Mitutoyo grade 00 square gage block is made of steel, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in inches, and indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.95 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibr...
-
4.8 of 5.0 with 11 Reviews
SALE PRICE: $110.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 619073
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 619073
To expand the variety of square gage block applications, (No Suggestions) offers the gage block accessories set. by assembling the items in the set, you can easily and quickly build up a precision measuring instrument.
-
4.8 of 5.0 with 1 Reviews
SALE PRICE: $113.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 614674-541
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 614674-541
|
The Mitutoyo grade AS-1 square gage block is made of steel, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. The grade AS-1 gage block is commonly used for workshop and inspection applications to calibrate fixtures and precision instruments, to inspect a variety of tools such as mounting tools, cutters, fixtures, and mechanical parts, and for manufacturing gage applications. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in metric [millimeter (mm)] units, and is indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 24.1 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke...
-
4.8 of 5.0 with 31 Reviews
SALE PRICE: $125.00 1% OFF
Manufacturer: ABS Import Tools, Inc.
Brand: HHIP
Model: 3900-3011
Manufacturer: ABS Import Tools, Inc.
Brand: HHIP
Model: 3900-3011
HHIP precision parallel is made from fine quality tool steel that is stress relieved against distortion and tin coated. Precision ground and hardened. Complete with a fitted plastic case. 2 holes in each parallel. Sizes include 1/8 x 1/2 x 3", 1/8 x 5/8 x 3", 1/8 x 3/4 x 3", 1/8 x 7/8 x 3", 1/8 x 1 x 3", 1/8 x 1-1/8 x 3", 1/8 x 1-1/4 x 3", 1/8 x 1-3/8 x 3", 1/8 x 1-1/2 x 3 inch and 1/8 x 1-5/8 x 3". tolerance: parallel to 0.0003 on 2 sides, top and bottom. Dimensions: within 0.001 "allowance.
-
4.8 of 5.0 with 10 Reviews
SALE PRICE: $130.51 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 614661-521
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 614661-521
|
The Mitutoyo grade 00 square gage block is made of steel, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of ceramic which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in metric [millimeter (mm)], and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 24.1 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks...
-
4.8 of 5.0 with 10 Reviews
SALE PRICE: $130.51 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 614661-521
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 614661-521
|
The Mitutoyo grade 00 square gage block is made of steel, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of ceramic which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in metric [millimeter (mm)], and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 24.1 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks...
-
4.8 of 5.0 with 50 Reviews
SALE PRICE: $131.38 2% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611142-516
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611142-516
|
All Mitutoyo gage blocks meet or exceed all known specifications. The flatness and parallelism surface finish necessary to achieve the required accuracies are the same as or better than government requirements. A certificate of inspection is furnished with all Mitutoyo gage blocks with a serial number on the case and an identification number on each block. The deviation of each block is registered. For this inspection, each gage block is measured relative to the upper level master using a gage block comparator. Grade K gage blocks are manufactured by absolute measurement using an interferometer. The gage block set and discrete gage block are supplied with a certificate of calibration. The certificate of calibration specifies the deviation from the nominal length. (Comparative measurement, however, is performed for all square gage blocks.). A certificate of accuracy, traceable to the NIST, is furnished with each Mitutoyo gage block set and individual block.
-
4.8 of 5.0 with 20 Reviews
SALE PRICE: $132.43
Manufacturer: Fowler
Brand: Fowler
Manufacturer: Fowler
Brand: Fowler
Fowler Master Range 2.361-3.150 53-686-315
-
4.8 of 5.0 with 33 Reviews
SALE PRICE: $133.20 1% OFF
Manufacturer: Fowler
Brand: Fowler
Manufacturer: Fowler
Brand: Fowler
Features Made of selected steels. Hardened for superior wear resistance. Matched to precision masters to ensure precision. Width and thickness have been carefully determined to provide optimum rigidity-to-weight ratios.
|
|