Gage Blocks & Accessories - Page 31

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 614202-521

The Mitutoyo grade 00 square gage block is made of steel, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in inches, and indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.95 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibr...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 611217-516

All Mitutoyo gage blocks meet or exceed all known specifications. The flatness and parallelism surface finish necessary to achieve the required accuracies are the same as or better than government requirements. A certificate of inspection is furnished with all Mitutoyo gage blocks with a serial number on the case and an identification number on each block. The deviation of each block is registered. For this inspection, each gage block is measured relative to the upper level master using a gage block comparator. Grade K gage blocks are manufactured by absolute measurement using an interferometer. The gage block set and discrete gage block are supplied with a certificate of calibration. The certificate of calibration specifies the deviation from the nominal length. (Comparative measurement, however, is performed for all square gage blocks.). A certificate of accuracy, traceable to the NIST, is furnished with each Mitutoyo gage block set and individual block.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 619055

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 293-234-30

25MM RATCHET THIMBLE MICROMETER

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4101-0722

HHIP individual rectangular gage block is supplied with a Manufacturer's certificate. Grade as-0 (2). offering n.I.S.T. Traceable calibration conforms to mil Std 45662a, ggg G 15C, ISO/IEC 17025 accredited, ISO 9000, 10012 1, ANSI ncsl Z540 1 and ISO guide 25 certified. Tolerance is +0.000004/-0.0000002". size is 0.111".

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4101-0767

HHIP individual rectangular gage block is supplied with a Manufacturer's certificate. Grade as-0 (2). offering n.I.S.T. Traceable calibration conforms to mil Std 45662a, ggg G 15C, ISO/IEC 17025 accredited, ISO 9000, 10012 1, ANSI ncsl Z540 1 and ISO guide 25 certified. Tolerance is +0.000004/-0.0000002". size is 0.250".

Manufacturer: ezMachineTools Brand: ezMachineTools

This precision parallel set has thickness of 3/16", length of 6", width of 1",1-1/4",1-1/2",1-3/4" and hardness of RC 55 to 62. It is parallel to 0.0003" on 2 sides, top and bottom within 0.0001" allowance and it comes with a plastic case.

Manufacturer: HHIP Brand: HHIP Model: 4101-0902

.100" Square Gage Block Grade AS-0 (2) Block is supplied with a manufacturer's certificate. 1/4" diameter hole. Tolerance is +.000004/-.000002".

Manufacturer: Starrett Brand: Starrett

Applications For all calibration needs on shop floor. Features Complete with certificate of commercial grade calibration and etched serial numbers. † Ships direct from factory

Manufacturer: ABS Import Tools, Inc. Brand: Pro Series by HHIP Model: 4102-0011

CHHIP Pro-series plug gage handles features SPI style. Superior finish and smooth operation. Holds pin gage with greatest gripping power. Can be used with go pin (green) and no go pin (red). comfortable and ergonomically designed handle for pin gages. No bushings required. Minimum measuring range is 0.011". maximum measuring range is 0.06".