Gage Blocks & Accessories - Page 39

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 619003

Optional accessory for rectangular gage block.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 611160-516

All Mitutoyo gage blocks meet or exceed all known specifications. The flatness and parallelism surface finish necessary to achieve the required accuracies are the same as or better than government requirements. A certificate of inspection is furnished with all Mitutoyo gage blocks with a serial number on the case and an identification number on each block. The deviation of each block is registered. For this inspection, each gage block is measured relative to the upper level master using a gage block comparator. Grade K gage blocks are manufactured by absolute measurement using an interferometer. The gage block set and discrete gage block are supplied with a certificate of calibration. The certificate of calibration specifies the deviation from the nominal length. (Comparative measurement, however, is performed for all square gage blocks.). A certificate of accuracy, traceable to the NIST, is furnished with each Mitutoyo gage block set and individual block.

Manufacturer: TTC Brand: TTC

Includes 1/4°, 1/2°, 1°, 2°, 3°, 4°, 5°, 10°, 15°, 20°, 25°, 30°, 35°, 40°, 45° (plus (2) riser blocks). TTC furnished in custom plastic case. Brown & Sharpe furnished in custom wooden case.

Manufacturer: Fowler Brand: Fowler

Includes NIST Certificate All Fowler Individual Square Steel Gage Blocks are Grade and traceable to the National Institute of Standards and Technology.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 516-805-26

The Mitutoyo 516-series Grade 0 Carbide Rectangular Inch Wear Gage Block Set includes a set of rectangular-shaped, tungsten carbide wear gage blocks with nominal length engraved in inches on each, and is supplied with a Mitutoyo inspection certificate that states that the blocks meet American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade 0 standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of each individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself.Wear gage blocks are wrung with frequently used gage blocks to prevent wear. Grade 0 gage blocks are commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. Tungsten carbide is harder than steel and ceramic for greater resistance to wear, and more resistant to thermal expansion for accuracy. Rectangular-shaped blocks provide accurate wringing. The nominal length of each block is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on each block for traceability. The set comes with a fitted wooden case for storage.The set includes a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the blocks meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish.Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measur...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 619032

Optional accessory for rectangular gage block.

Manufacturer: Winters Brand: Winters Instruments Model: SNV510LF

Applications: Provides precision flow control for any non-corrosive application up to 400 psi (2,758 kPa). For mild applications, this valve can be used to throttle pulsation. CRN Registered. Warranty: 1 Year. Body: Forged Lead Free Brass. Handle: ABS plastic, dyed red. O-Ring: Rubber. Shaft: Lead Free Brass. Nut: Lead Free Brass. Process Temperature: -9°F to 212°F (-23°C to 100°C). Maximum Operating Pressure: 400 PSI (2758 KPA). Connection: 1/4" NPT Female x Female.

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4102-0003

HHIP pin gage handles is comfortable and ergonomically made handle for pin gages. Made from aluminum and powder coated. Can be used with go pin (green) on one end, no go pin (red) on opposite end. Product specifications: for pin gage: 251 - 500 inch

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4101-0733

HHIP individual rectangular gage block is supplied with a Manufacturer's certificate. Grade as-0 (2). offering n.I.S.T. Traceable calibration conforms to mil Std 45662a, ggg G 15C, ISO/IEC 17025 accredited, ISO 9000, 10012 1, ANSI ncsl Z540 1 and ISO guide 25 certified. Tolerance is +0.000004/-0.0000002". size is 0.122".

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4101-0706

HHIP individual rectangular gage block is supplied with a Manufacturer's certificate. Grade as-0 (2). offering n.I.S.T. Traceable calibration conforms to mil Std 45662a, ggg G 15C, ISO/IEC 17025 accredited, ISO 9000, 10012 1, ANSI ncsl Z540 1 and ISO guide 25 certified. Tolerance is +0.000004/-0.0000002". size is 0.1004".