|
|
-
4.1 of 5.0 with 44 Reviews
SALE PRICE: $21.01 30% OFF
Manufacturer: ABS Import Tools, Inc.
Brand: HHIP
Model: 4102-0007
Manufacturer: ABS Import Tools, Inc.
Brand: HHIP
Model: 4102-0007
HHIP pin gage handles is comfortable and ergonomically made handle for pin gages. Made from aluminum and powder coated. Can be used with go pin (green) on one end, no go pin (red) on opposite end. Product specifications: for pin gage: 833 - 916 inch
-
4.1 of 5.0 with 10 Reviews
SALE PRICE: $26.30 1% OFF
Manufacturer: HHIP
Brand: HHIP
Model: 4101-0958
Manufacturer: HHIP
Brand: HHIP
Model: 4101-0958
.147" Square Gage Block Grade AS-0 (2) Block is supplied with a manufacturer's certificate. 1/4" diameter hole. Tolerance is +.000004/-.000002".
-
4.1 of 5.0 with 49 Reviews
SALE PRICE: $26.30 1% OFF
Manufacturer: HHIP
Brand: HHIP
Model: 4101-0937
Manufacturer: HHIP
Brand: HHIP
Model: 4101-0937
.126" Square Gage Block Grade AS-0 (2) Block is supplied with a manufacturer's certificate. 1/4" diameter hole. Tolerance is +.000004/-.000002".
-
4.1 of 5.0 with 36 Reviews
SALE PRICE: $26.30 1% OFF
Manufacturer: HHIP
Brand: HHIP
Model: 4101-0960
Manufacturer: HHIP
Brand: HHIP
Model: 4101-0960
.149" Square Gage Block Grade AS-0 (2) Block is supplied with a manufacturer's certificate. 1/4" diameter hole. Tolerance is +.000004/-.000002".
-
4.1 of 5.0 with 26 Reviews
SALE PRICE: $26.30 1% OFF
Manufacturer: HHIP
Brand: HHIP
Model: 4101-0954
Manufacturer: HHIP
Brand: HHIP
Model: 4101-0954
.143" Square Gage Block Grade AS-0 (2) Block is supplied with a manufacturer's certificate. 1/4" diameter hole. Tolerance is +.000004/-.000002".
-
4.1 of 5.0 with 37 Reviews
SALE PRICE: $29.34 1% OFF
Manufacturer: HHIP
Brand: HHIP
Model: 4101-0967
Manufacturer: HHIP
Brand: HHIP
Model: 4101-0967
.250" Square Gage Block Grade AS-0 (2) Block is supplied with a manufacturer's certificate. 1/4" diameter hole. Tolerance is +.000004/-.000002".
-
4.1 of 5.0 with 2 Reviews
SALE PRICE: $33.77 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611580-541
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611580-541
|
The Mitutoyo grade AS-1 rectangular gage block is made of steel, has its nominal length engraved in metric [millimeter (mm)], and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade AS-1 gage block is commonly used for workshop and inspection applications to calibrate fixtures and precision instruments, to inspect a variety of tools such as mounting tools, cutters, fixtures, and mechanical parts, and for manufacturing gage applications. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in metric [millimeter (mm)], and indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 9 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standa...
-
4.1 of 5.0 with 37 Reviews
SALE PRICE: $35.04 1% OFF
Manufacturer: ABS Import Tools
Brand: HHIP
Manufacturer: ABS Import Tools
Brand: HHIP
Grade AS-0 (2) | Each block is supplied with a manufacturer's certificate
-
4.1 of 5.0 with 43 Reviews
SALE PRICE: $35.32 1% OFF
Manufacturer: HHIP
Brand: HHIP
Model: 4101-0971
Manufacturer: HHIP
Brand: HHIP
Model: 4101-0971
.450" Square Gage Block Grade AS-0 (2) Block is supplied with a manufacturer's certificate. 1/4" diameter hole. Tolerance is +.000004/-.000002".
-
4.1 of 5.0 with 4 Reviews
SALE PRICE: $42.65 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 616105-541
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 616105-541
|
The Mitutoyo grade AS-1 square gage block is made of ceramic, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade AS-1 gage block is commonly used for workshop and inspection applications to calibrate fixtures and precision instruments, to inspect a variety of tools such as mounting tools, cutters, fixtures, and mechanical parts, and for gage manufacturing applications. It is made of ceramic, which resists corrosion, abrasion, and burrs, can withstand high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.95 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo...
|
|