|
|
-
3.8 of 5.0 with 45 Reviews
SALE PRICE: $2,140.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 516-605
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 516-605
The Mitutoyo 516-605 gage block accessory set includes 14 pieces for assembling rectangular gage blocks over 100 mm into a precision measuring instrument. The set includes (5) gage block holders, (3) adapters, (1) base, (2) half round jaws, (2) plain jaws, and (1) scriber point, in a wood case. Founded in Tokyo in 1934, Mitutoyo is a leader in the metrology field, producing high-quality measurement products including mechanical, dimensional gauging products, focusing on micrometers, calipers, indicators, and other measurement tools, as well as output gauges, interfaces, data collectors, and analysis software. Mitutoyo formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, Illinois, with additional locations in the U.S. and Canada.
-
3.8 of 5.0 with 46 Reviews
SALE PRICE: $2,395.00 16% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 516-402-26
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 516-402-26
|
The Mitutoyo 516-series Grade 0 Steel Square Inch Gage Block Set includes a set of square-shaped, high-carbon, high-chrome steel gage blocks with nominal length engraved in inches on each, and is supplied with a Mitutoyo inspection certificate that states that the blocks meet American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade 0 standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of each individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself.Grade 0 gage blocks are commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. High-carbon, high-chrome steel has a high hardness for minimum deterioration, and is selected for its wear-resistance. These gage blocks have a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. The nominal length of each block is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on each block for traceability. The set comes with a fitted wooden case for storage.The set includes a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the blocks meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish.Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measur...
-
3.7 of 5.0 with 48 Reviews
SALE PRICE: $16.71 1% OFF
Manufacturer: ABS Import Tools, Inc.
Brand: HHIP
Model: 4101-0728
Manufacturer: ABS Import Tools, Inc.
Brand: HHIP
Model: 4101-0728
HHIP individual rectangular gage block is supplied with a Manufacturer's certificate. Grade as-0 (2). offering n.I.S.T. Traceable calibration conforms to mil Std 45662a, ggg G 15C, ISO/IEC 17025 accredited, ISO 9000, 10012 1, ANSI ncsl Z540 1 and ISO guide 25 certified. Tolerance is +0.000004/-0.0000002". size is 0.117".
-
3.7 of 5.0 with 44 Reviews
SALE PRICE: $19.67 1% OFF
Manufacturer: ABS Import Tools, Inc.
Brand: HHIP
Model: 4101-0770
Manufacturer: ABS Import Tools, Inc.
Brand: HHIP
Model: 4101-0770
HHIP individual rectangular gage block is supplied with a Manufacturer's certificate. Grade as-0 (2). offering n.I.S.T. Traceable calibration conforms to mil Std 45662a, ggg G 15C, ISO/IEC 17025 accredited, ISO 9000, 10012 1, ANSI ncsl Z540 1 and ISO guide 25 certified. Tolerance is +0.000004/-0.0000002". size is 0.400".
-
3.7 of 5.0 with 28 Reviews
SALE PRICE: $20.73 28% OFF
Manufacturer: ABS Import Tools, Inc.
Brand: HHIP
Model: 4901-0048
Manufacturer: ABS Import Tools, Inc.
Brand: HHIP
Model: 4901-0048
HHIP 36-0 wire measuring gages features for measuring wire diameter and non-ferrous sheets such as copper, Brass, aluminum, etc. Measures gauge no. From 36 to 0 (.003 -.3125 ). Made of hardened steel and satin chrome finish. Marks of wire size on front, Decimal equivalents on reverse side complete in vinyl pouch.
-
3.7 of 5.0 with 1 Reviews
SALE PRICE: $21.68 29% OFF
Manufacturer: ABS Import Tools, Inc.
Brand: HHIP
Model: 4102-0008
Manufacturer: ABS Import Tools, Inc.
Brand: HHIP
Model: 4102-0008
HHIP pin gage handles is comfortable and ergonomically made handle for pin gages. Made from aluminum and powder coated. Can be used with go pin (green) on one end, no go pin (red) on opposite end. Product specifications: for pin gage: 917 - 1.000".
-
3.7 of 5.0 with 20 Reviews
SALE PRICE: $24.90 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611192-531
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611192-531
|
The Mitutoyo grade 0 rectangular gage block is made of steel, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement of length in manufacturing industries. They are commonly made o...
-
3.7 of 5.0 with 25 Reviews
SALE PRICE: $26.30 1% OFF
Manufacturer: HHIP
Brand: HHIP
Model: 4101-0918
Manufacturer: HHIP
Brand: HHIP
Model: 4101-0918
.107" Square Gage Block Grade AS-0 (2) Block is supplied with a manufacturer's certificate. 1/4" diameter hole. Tolerance is +.000004/-.000002".
-
3.7 of 5.0 with 7 Reviews
SALE PRICE: $26.30 1% OFF
Manufacturer: HHIP
Brand: HHIP
Model: 4101-0914
Manufacturer: HHIP
Brand: HHIP
Model: 4101-0914
.103" Square Gage Block Grade AS-0 (2) Block is supplied with a manufacturer's certificate. 1/4" diameter hole. Tolerance is +.000004/-.000002".
-
3.7 of 5.0 with 41 Reviews
SALE PRICE: $26.31 33% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611105-531
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611105-531
|
The Mitutoyo grade 0 rectangular gage block is made of steel, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement of length in manufacturing industries. They are commonly made o...
|
|