|
|
-
3.9 of 5.0 with 4 Reviews
SALE PRICE: $49.92 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 614611-531
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 614611-531
|
The Mitutoyo grade 0 square gage block is made of steel, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear resistance. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in metric [millimeter (mm)] units, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 24.1 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks...
-
3.9 of 5.0 with 30 Reviews
SALE PRICE: $55.00 1% OFF
Manufacturer: Federal
Brand: Federal
Manufacturer: Federal
Brand: Federal
From our inventory, we are selling a New in Box Federal 91262-002 Cabling for Inspection Gauges. Specifications: Model #: 91262-002  ST15-4-F
-
3.9 of 5.0 with 11 Reviews
SALE PRICE: $55.00 1% OFF
Manufacturer: Federal Mogul
Brand: Federal Mogul
Manufacturer: Federal Mogul
Brand: Federal Mogul
From our inventory we are selling a New Federal Mogul 90815-053 Cabling for Inspection Gauges. Specifications: Model #: 90815-053  ST15-4-F
-
3.9 of 5.0 with 1 Reviews
SALE PRICE: $55.50 1% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Designed for calibrating micrometers and zeroing vernier, dial, and digital calipers. 1/4" diameter rod with flat end. Standard have two insulating grips to protect rods from heat of hands. Meets federal specifications.
-
3.9 of 5.0 with 43 Reviews
SALE PRICE: $56.80 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613561-531
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613561-531
|
The Mitutoyo grade 0 rectangular gage block is made of ceramic, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of ceramic which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in metric [millimeter (mm)] units, and is indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 9 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuri...
-
3.9 of 5.0 with 26 Reviews
SALE PRICE: $59.95
Manufacturer: Grizzly
Brand: Grizzly
Model: G9654
Manufacturer: Grizzly
Brand: Grizzly
Model: G9654
These tool room grade "B" Granite Plates have a bilateral accuracy of plus or minus .0001" total instrument runout for precision measurements form a common surface base. Granite Plates are harder than steel, non magnetic, least responsive to temperature changes, practically maintenance free and won't corrode like steel. Available with clamping ledges or without.
-
3.9 of 5.0 with 33 Reviews
SALE PRICE: $60.00 1% OFF
Manufacturer: Accusize Co. Ltd.
Brand: Accusize Industrial Tools
Model: EG05-3050
Manufacturer: Accusize Co. Ltd.
Brand: Accusize Industrial Tools
Model: EG05-3050
V-block has (4)3/8"16 tapped holes, (2) in the base and (1) on each side for angle iron clamping Block is provided with black oxidized clamp Parallelism tolerance of Vee axis to base: within 0.0003'' /8 microns Dimensions:3-5/8'' L x 1-7/8'' W x 1-7/8'' H Holding capacity: 1-5/16''
-
3.9 of 5.0 with 24 Reviews
SALE PRICE: $66.30 2% OFF
Manufacturer: Hexagon Metrology
Brand: Standard Gage
Manufacturer: Hexagon Metrology
Brand: Standard Gage
-
3.9 of 5.0 with 23 Reviews
SALE PRICE: $66.79
Manufacturer: TTC
Brand: TTC
Manufacturer: TTC
Brand: TTC
Use for drilling, milling, grinding and set-up applications.
-
3.9 of 5.0 with 39 Reviews
SALE PRICE: $69.67 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613196-551
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613196-551
|
The Mitutoyo grade AS-2 rectangular gage block is made of ceramic, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade AS-2 gage block is commonly used in workshops for calibrating and inspecting mounting tools and cutters. It is made of ceramic which resists corrosion, abrasion, and burrs, can withstand high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement of length in manufacturing industries. They are commonly made of precision-ground steel, ceramic, or carbide mater...
|
|