Dimensional Calibration - Page 127

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 613194-531

The Mitutoyo grade 0 rectangular gage block is made of ceramic, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of ceramic which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement o...

Manufacturer: HHIP Brand: HHIP

1/2 X 6" 8 Pair Parallel Set ~ Made from fine quality tool steel that has been stress relieved against distortion. ~ Precision ground and hardened. ~ These precision parallels are recommended for layout work, standards and set-up. ~ The holes are designed for easier handling and set-ups. ~ Case hardened RC 55 to 62 on 2 sides, top and bottom only. ~ Tolerance is Parallel to 0.0003 on 2 sides, top and bottom. ~ The dimensions are withing 0.001" allowance. ~ Complete with fitted durable plastic case. ~ Sizes included are 1/2 X 7/8, 1/2 X 1, 1/2 X 1-1/8, 1/2 X 1-1/4, 1/2 X 1-3/8, 1/2 X 1-1/2, 1/2 X 1-5/8, 1/2 X 1-3/4".

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 619002

Optional accessory for rectangular gage block.

Manufacturer: VERMONT GAGE Brand: Vermont Gage

Add a taperlock handle to create a complete pipe gage assembly. Rc 60 - 62 (cold stabilized) tool steel. NIST traceable.

Manufacturer: VERMONT GAGE Brand: Vermont Gage

Add a taperlock handle to create a complete pipe gage assembly. Rc 60 - 62 (cold stabilized) tool steel. NIST traceable.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 614340-521

The Mitutoyo grade 00 square gage block is made of steel, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in inches, and indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.95 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibr...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 614340-521

The Mitutoyo grade 00 square gage block is made of steel, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in inches, and indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.95 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibr...

Manufacturer: Echo Brand: ECHO Model: 7001700103

Echo - rod, manufacturer part number 7001700103

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

Manufacturer: Winters Brand: Winters Instruments Model: SSN512LF

Applications: To significantly lessen the damaging effects of pulsation on gauges, transducers, transmitters and pressure switches. Incorporates a sintered, porous 316 stainless steel snubbing element with a large surface area to ensure long term effectiveness. CRN Registered. Warranty: 1 Year. Operating Temperature: -65F to 650F (-53C to 343C). Operating Pressure: Maximum 10,000 psi (68950 kPa). Burst Pressure: 30,000 psi (206,850 kPa). Housing: Lead Free Brass. Snubbing Element: Sintered, porous type 316 SS. Retainer: 300 Series SS. Connection: 1/2" NPT Female x 1/2" NPT Male