|
|
-
3.8 of 5.0 with 44 Reviews
SALE PRICE: $38.99 5% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 234MA-125
Manufacturer: Starrett
Brand: Starrett
Model: 234MA-125
The rod or "standard" is for checking and setting micrometers of 2" capacity and larger, and are also used on machine tools for comparing gauges, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. It is made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius. Available with insulated handle to minimize expansion by heat when held in the hand.
-
3.8 of 5.0 with 14 Reviews
SALE PRICE: $39.00 1% OFF
Manufacturer: GASCO
Brand: Gasco
Manufacturer: GASCO
Brand: Gasco
Control Valve for 17 Liter and 34 Liter Cylinders with CGA 600 Connections
-
3.8 of 5.0 with 28 Reviews
SALE PRICE: $39.95 1% OFF
Manufacturer: LittleMachineShop.com
Brand: LittleMachineShop.com
Model: LMS3946
Manufacturer: LittleMachineShop.com
Brand: LittleMachineShop.com
Model: LMS3946
These 3" long thin parallels are great for the small vises used on the mini mill. This set of 1/8" thin parallels contains 9 pairs of parallels that step in 1/16" increments. This gives you more sizes you can use in our small vises. The two pairs of shi
-
3.8 of 5.0 with 2 Reviews
SALE PRICE: $41.01 1% OFF
Manufacturer: Starrett
Brand: Starrett
Manufacturer: Starrett
Brand: Starrett
229A Telescoping Gage 1/
-
3.8 of 5.0 with 48 Reviews
SALE PRICE: $42.76 40% OFF
Manufacturer: Sumner
Brand: Sumner Manufacturing
Model: SUM 781900
Manufacturer: Sumner
Brand: Sumner Manufacturing
Model: SUM 781900
Sumner's Welding Gage provides an accurate quick check of internal hi-lo and root weld spacing with little effort.
-
3.8 of 5.0 with 5 Reviews
SALE PRICE: $42.85 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 616128-541
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 616128-541
|
The Mitutoyo grade AS-1 square gage block is made of ceramic, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade AS-1 gage block is commonly used for workshop and inspection applications to calibrate fixtures and precision instruments, to inspect a variety of tools such as mounting tools, cutters, fixtures, and mechanical parts, and for gage manufacturing applications. It is made of ceramic, which resists corrosion, abrasion, and burrs, can withstand high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.95 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo...
-
3.8 of 5.0 with 5 Reviews
SALE PRICE: $44.50 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613191-541
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613191-541
|
The Mitutoyo grade AS-1 rectangular gage block is made of ceramic, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. The grade AS-1 gage block is commonly used for workshop and inspection applications to calibrate fixtures and precision instruments, to inspect a variety of tools such as mounting tools, cutters, fixtures, and mechanical parts, and for manufacturing gage applications. It is made of ceramic which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment...
-
3.8 of 5.0 with 14 Reviews
SALE PRICE: $46.71 1% OFF
Manufacturer: Shark
Brand: Shark
Manufacturer: Shark
Brand: Shark
Shark A9192 INDIVIDUAL DOUBL
-
3.8 of 5.0 with 7 Reviews
SALE PRICE: $47.95 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611674-531
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611674-531
|
The Mitutoyo grade 0 rectangular gage block is made of steel, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in metric [millimeter (mm)] units, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 9 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement of length in ...
-
3.8 of 5.0 with 12 Reviews
SALE PRICE: $55.40 4% OFF
Manufacturer: HHIP
Brand: HHIP
Model: 4401-0011
Manufacturer: HHIP
Brand: HHIP
Model: 4401-0011
12 X 9 X 3" Granite Surface Plate Grade B Ledge 0 ~ Surface plates are checked by an auto-collimator for overall accuracy assurance. ~ Accuracy is ±0001". ~ Granite surface plates meet or exceed Federal Specifications GGG-P-463C. ~ Includes a certificate of inspection. ~ Note that these are not NIST traceable.
|
|