|
|
-
3.8 of 5.0 with 7 Reviews
SALE PRICE: $55.50 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 619020
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 619020
To expand the variety of rectangular gage block (steel and ceramic) applications, (No Suggestions) offers the gage block accessories set. by assembling the items in the set, you can easily and quickly build up a precision measuring instrument.
-
3.8 of 5.0 with 48 Reviews
SALE PRICE: $55.80 1% OFF
Manufacturer: HHIP
Brand: HHIP
Manufacturer: HHIP
Brand: HHIP
Pro-Series Precision 1/32 X 6" 10 Pair Ultra Thin Parallel Set ~ Comes with a statement of certificate of accuracy, tolerance & hardness. ~ Made from fine quality, precision ground and hardened, alloy tool steel that has been stress relieved against distortion. ~ Each parallel size clearly marked. ~ Hardness is RC 40 to 50. ~ Complete with fitted wood case. ~ Total parallelism within the entire length to .0002". ~ Flatness or straightness to .0002". ~ Height dimensions are + or - .0002". ~ Width/thickness to + or - .005".
-
3.8 of 5.0 with 35 Reviews
SALE PRICE: $58.61 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613613-531
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613613-531
|
The Mitutoyo grade 0 rectangular gage block is made of ceramic, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of ceramic which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in metric [millimeter (mm)] units, and is indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 9 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuri...
-
3.8 of 5.0 with 11 Reviews
SALE PRICE: $60.17 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 10002
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 10002
-
3.8 of 5.0 with 27 Reviews
SALE PRICE: $64.85 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 614506-541
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 614506-541
|
The Mitutoyo grade AS-1 square gage block is made of steel, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. The grade AS-1 gage block is commonly used for workshop and inspection applications to calibrate fixtures and precision instruments, to inspect a variety of tools such as mounting tools, cutters, fixtures, and mechanical parts, and for manufacturing gage applications. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in metric [millimeter (mm)] units, and is indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 24.1 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke...
-
3.8 of 5.0 with 44 Reviews
SALE PRICE: $68.42 9% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Designed for calibrating micrometers and zeroing vernier, dial, and digital calipers. 1/4" diameter rod with flat end. Standard have two insulating grips to protect rods from heat of hands. Meets federal specifications.
-
3.8 of 5.0 with 8 Reviews
SALE PRICE: $71.89 1% OFF
Manufacturer: ABS Import Tools, Inc.
Brand: HHIP
Model: 4901-0110
Manufacturer: ABS Import Tools, Inc.
Brand: HHIP
Model: 4901-0110
HHIP Pro-Series drill point gage features for measuring properly ground 59 degree drill tips. Made of steel - satin chrome finished. End clip is adjustable and removable. Versatile-can be used as rule, hook rule, try square, depth gage, or caliper and for layouts.
-
3.8 of 5.0 with 11 Reviews
SALE PRICE: $72.69 1% OFF
Manufacturer: Starrett
Brand: L.S. Starrett
Manufacturer: Starrett
Brand: L.S. Starrett
Size 12", 300mm Caliper Type Outside Calipers Nut Type Solid Nut
-
3.8 of 5.0 with 50 Reviews
SALE PRICE: $75.56
Manufacturer: HHIP
Brand: HHIP
Model: 3402-0953
Manufacturer: HHIP
Brand: HHIP
Model: 3402-0953
1.77 X 1.61 X 2.76" V-block & Clamp Set | 90° V groove accuracy are central, parallel and square with all surfaces within 0.0003". | Case is hardened and ground. | Clamps are included.
-
3.8 of 5.0 with 37 Reviews
SALE PRICE: $80.91 5% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 614615-531
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 614615-531
|
The Mitutoyo grade 0 square gage block is made of steel, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear resistance. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in metric [millimeter (mm)] units, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 24.1 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks...
|
|