Dimensional Calibration - Page 36

Manufacturer: Starrett Brand: Starrett Model: 82230

Manufacturer: Starrett Brand: Starrett Model: 81570

Angle plates provide a convenient and practical means of clamping and holding work in a vertical position. Their excellent finish and flatness make them very compatible for use with granite surface plate accuracies. The angle plates are available with either 2 or 4 finished faces. The 2-face angle plate has the bottom and the adjacent square face finished flat and square to one another.

Manufacturer: Starrett Brand: Starrett Model: 80891

Even distribution of large quartz crystals provides a smooth finish, which significantly reduces wear on the surface plate and the instruments used on it. Fine micro-finish, combined with the natural voids in the surface, prevents wringing and provides a velvety-smooth tool action. Non-quartz-bearing granite in average daily use requires resurfacing about once a year, while crystal pink plates used in these same plants have required resurfacing only once every three to five years, on average. Great surface hardness and wear resistance the highest percentage of quartz crystals of any granite plate. Quality and economy combined. Comparable to black granite plates while outwearing them as much as 5 to 1. Standard-size plates are mounted on resilient support pads, providing isolation from normal vibration and a non-distorting 3-point suspension. Packed one per crate with skids for forklift handling.

Manufacturer: RPM Brand: RPM Model: RPMC8130

OverviewRPM designers went all out to create the most innovative and useful tool to check your vehicle’s ride height! (A vehicle’s ride height is the static height of the vehicle as it rests on its suspension. It varies from front to rear and from one side to the other depending upon weight and spring tension.) The gauge has a graduated scale along the upper edge of the base with easy to read lines and numbers. Each graduation on the inch scale (81300) represents 0.025" and on the metric scale (81150), 0.5mm. (for extreme accuracy, the graduations are far enough apart that they may be split to read as little as 0.012" [81300] or 0.25mm. [81150])! Included with the gauge is a spring-loaded tensioning knob to keep the gauge positioned while checking & setting positions on the gauge. The RPM 81300 Ride Height Gauge (inch scale) has a range from 0.150" to 1.150" (5/32" to 1-5/32") and the 81150 Ride Height Gauge (metric scale) has a range from 4mm. to 29.5mm.! RPM’s ingenious design uses a base and a slide that travels along a twenty degree angle. By using such a slight angle, the accuracy of the gauge increases dramatically while still allowing a broad height range. Either gauge may be used to check most on-road or off-road vehicle’s ride height, including pan cars & sedans! It’s extremely easy to use and is the most accurate tool available on the R/C market!

Manufacturer: Flexbar Brand: Flexbar

Individual Precision Grade Gage Ball Size: 16mm. Chrome Steel Hardened To 63RC, Ground and Lapped Certified to Grade 25 Accuracy°.0001" dia.,000025" sphericity* Inchand metric sizes available.

Manufacturer: Flexbar Brand: Flexbar

Individual Precision Grade Gage Ball Size: 1.3125 (1-5/16). Chrome Steel Hardened To 63RC, Ground and Lapped Certified to Grade 25 Accuracy°.0001" dia.,000025" sphericity* Inch and metric sizes available.

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4101-0710

HHIP individual rectangular gage block is supplied with a Manufacturer's certificate. Grade as-0 (2). offering n.I.S.T. Traceable calibration conforms to mil Std 45662a, ggg G 15C, ISO/IEC 17025 accredited, ISO 9000, 10012 1, ANSI ncsl Z540 1 and ISO guide 25 certified. Tolerance is +0.000004/-0.0000002". size is 0.1008".

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4101-0718

HHIP individual rectangular gage block is supplied with a Manufacturer's certificate. Grade as-0 (2). offering n.I.S.T. Traceable calibration conforms to mil Std 45662a, ggg G 15C, ISO/IEC 17025 accredited, ISO 9000, 10012 1, ANSI ncsl Z540 1 and ISO guide 25 certified. Tolerance is +0.000004/-0.0000002". size is 0.107".

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4101-0745

HHIP individual rectangular gage block is supplied with a Manufacturer's certificate. Grade as-0 (2). offering n.I.S.T. Traceable calibration conforms to mil Std 45662a, ggg G 15C, ISO/IEC 17025 accredited, ISO 9000, 10012 1, ANSI ncsl Z540 1 and ISO guide 25 certified. Tolerance is +0.000004/-0.0000002". size is 0.134".

Manufacturer: Flexbar Brand: Flexbar

Inch Gage Indicator Ball with 4-48 stems for Flexbar Precision Indicator Gage Ball SystemTM (Size: .1875); Precision Grade Gage Balls with affixed threaded stems for use with dial gages and calipers. Easy to use and enables you to measure critical internal taper angles, taper openings, chamfers, groove locations and hole depths both quickly and accurately. Precision Indicator Gage Ball System eliminates complicated and costly setups with sine plates (gage block), optical comparators, flush pin gages, plug gages, chamfer, micrometers and similar checking devices for any related taper bore dimensions. System includes: a set of thirty-one balls chrome steel hardened to 63RC, ground and lapped, and certified to grade 25 Accuracy °.0001 inch diameter, sphericity .000025 inch, sizes ranging from .0938 to 1.2500 with affixed 4-48 threaded indicator stems.