|
|
-
4.3 of 5.0 with 3 Reviews
SALE PRICE: $67.20 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611203-531
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611203-531
|
The Mitutoyo grade 0 rectangular gage block is made of steel, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement of length in manufacturing industries. They are commonly made o...
-
4.3 of 5.0 with 2 Reviews
SALE PRICE: $69.99
Manufacturer: Craftsman
Brand: Craftsman
Model: 38629
Manufacturer: Craftsman
Brand: Craftsman
Model: 38629
Craftsman 38629 Micrometers feature a 5" to 6" measuring range with .001" graduation. Each is furnished with a ratchet and speeder for uniform pressure and quick adjustment. A spindle lock and setting standard are also included. Features a satin chrome finish spindle which provides a glare free viewing area that also resists rust. Frame is designed for use in narrow slots and hard to reach places. Advanced sleeve design with staggered lines and distinct figures for precise and easy readability.
-
4.3 of 5.0 with 27 Reviews
SALE PRICE: $70.09 1% OFF
Manufacturer: HHIP
Brand: HHIP
Model: 3402-0010
Manufacturer: HHIP
Brand: HHIP
Model: 3402-0010
For drilling, milling, and set up applications. 0-60 degrees adjustable angle by locking the hex screw on the bottom. Squareness: - 0.0002". Angle accuracy: ±10'. Hardness: HRC 50-55.
-
4.3 of 5.0 with 1 Reviews
SALE PRICE: $72.00 1% OFF
Manufacturer: Accusize Co. Ltd.
Brand: Accusize Industrial Tools
Model: EG02-0416
Manufacturer: Accusize Co. Ltd.
Brand: Accusize Industrial Tools
Model: EG02-0416
23 hole precision set, HARDENED STEEL, HARDENED AND PRECISION GROUND Extremely versatile for precision layout and set-up work Each set contains two matched blocks
-
4.3 of 5.0 with 24 Reviews
SALE PRICE: $72.18 1% OFF
Manufacturer: HHIP
Brand: HHIP
Model: 3402-0002
Manufacturer: HHIP
Brand: HHIP
Model: 3402-0002
Guaranteed square parallel within .0002". Hardened & Ground to RC 58-60. 90 degrees Vee blocks. Supplied with bolts and clamps in wooden case.
-
4.3 of 5.0 with 39 Reviews
SALE PRICE: $72.49
Manufacturer: TTC
Brand: TTC
Manufacturer: TTC
Brand: TTC
Holes furnished throughout unit to facilitate clamping.
-
4.3 of 5.0 with 48 Reviews
SALE PRICE: $75.49
Manufacturer: TTC
Brand: TTC
Manufacturer: TTC
Brand: TTC
Use for drilling, milling, grinding and set-up applications.
-
4.3 of 5.0 with 48 Reviews
SALE PRICE: $75.49
Manufacturer: TTC
Brand: TTC
Manufacturer: TTC
Brand: TTC
Use for drilling, milling, grinding and set-up applications.
-
4.3 of 5.0 with 25 Reviews
SALE PRICE: $77.90 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613183-541
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613183-541
|
The Mitutoyo grade AS-1 rectangular gage block is made of ceramic, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. The grade AS-1 gage block is commonly used for workshop and inspection applications to calibrate fixtures and precision instruments, to inspect a variety of tools such as mounting tools, cutters, fixtures, and mechanical parts, and for manufacturing gage applications. It is made of ceramic which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment...
-
4.3 of 5.0 with 24 Reviews
SALE PRICE: $78.00
Manufacturer: HHIP
Brand: HHIP
Manufacturer: HHIP
Brand: HHIP
Fine Tune Steel Surface Gage With Mag Base ~ Post length is 12". ~ Knob on top of surface gage for easy adjustments. ~ One handed fine adjustment. ~ Hardened and ground steel base with a magnet On/Off switch. ~ Scriber head is hardened.
|
|