Dimensional Calibration - Page 87

Manufacturer: Flexbar Brand: Flexbar

Magnetic Chuck Parallels & Universal V-Blocks. Integrally Cast into one solid piece! Made in U.S.A. Ground All over and serial numbered in pairs. These Fine V-Blocks are now made Universal (holds in any direction on the Magnetic Chuck). 1 x 2 x 4. Micro Parallels ground All over & serial numbered in pairs. Model No. 18240, One pair Magnetic Chuck Parallels.

Manufacturer: GASCO Brand: Gasco

70 Series Calibration Gas Regulator for NON-reactive Calibration Gas Mixtures, Cylinders: 34LA Aluminum, 58L, 74L, 116L and 103 Steel Cylinders, ecosmart cylinders: 44es,58es,66es, and 116es

Manufacturer: TTC Brand: TTC

Supplied with a certificate of accuracy only. Includes: 1 block x .10005", 9 blocks x .1001 to .1009 (step of .0001"), 9 blocks x .101 to .109 (step of .001"), 9 blocks x .11 to .19 (step of .01"), 5 blocks x .1 to .5 (step of .1"),1 block x 1, 1 block x 2, 1 block x 4

Manufacturer: TTC Brand: TTC

Supplied with a certificate of accuracy only. Includes: 1 block x .10005", 9 blocks x .1001 to .1009 (step of .0001"), 9 blocks x .101 to .109 (step of .001"), 9 blocks x .11 to .19 (step of .01"), 5 blocks x .1 to .5 (step of .1"),1 block x 1, 1 block x 2, 1 block x 4

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 614675-531

The Mitutoyo grade 0 square gage block is made of steel, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear resistance. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in metric [millimeter (mm)] units, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 24.1 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 516-808-26

The Mitutoyo 516-series Grade AS-1 Carbide Rectangular Inch Wear Gage Block Set includes a set of rectangular-shaped, tungsten carbide wear gage blocks with nominal length engraved in inches on each, and is supplied with a Mitutoyo inspection certificate that states that the blocks meet American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade AS-1 standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of each individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself.Wear gage blocks are wrung with frequently used gage blocks to prevent wear. Grade AS-1 gage blocks are commonly used in workshop and inspection applications to calibrate fixtures and precision instruments, to inspect a variety of tools such as mounting tools, cutters, fixtures, and mechanical parts, and for gage manufacturing applications. Tungsten carbide is harder than steel and ceramic for greater resistance to wear, and more resistant to thermal expansion for accuracy. Rectangular-shaped blocks provide accurate wringing. The nominal length of each block is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on each block for traceability. The set comes with a fitted wooden case for storage.The set includes a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the blocks meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish.Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 619004

Optional accessory for rectangular gage block.

Manufacturer: Gasco Brand: Gasco

Technical Specification Item Calibration Gas Gas Name Hydrogen Sulfide, Nitrogen Gas Mixture 150 PPM Hydrogen Sulfide, Balance Nitrogen Background Gas Nitrogen Cylinder Capacity 66L Cylinder Material Aluminum Alloy For Use With Any and All OEM Gas Detectors Connection Size C-10 Max. Pressure 1200 psi Cylinder Dia. 2-9/10 Cylinder Height 10-1/2 Accuracy +/-5% Calibration Certificate NIST This listing is for each.

Manufacturer: Gasco Brand: Gasco

Technical Specification Item Calibration Gas Gas Name Sulfur Dioxide, Nitrogen Gas Mixture 100 PPM Sulfur Dioxide, Balance Nitrogen Background Gas Nitrogen Cylinder Capacity 66L Cylinder Material Aluminum Alloy For Use With Any and All OEM Gas Detectors Connection Size C-10 Max. Pressure 1200 psi Cylinder Dia. 2-9/10 Cylinder Height 10-1/2 Accuracy +/-5% Calibration Certificate NIST This listing is for each.

Manufacturer: HHIP Brand: HHIP

Pro-Series Precision 1/8 X 6" 10 Pair Parallel Set ~ Comes with a statement of certificate of accuracy, tolerance & hardness. ~ Made from fine quality, precision ground and hardened, alloy tool steel that has been stress relieved against distortion. ~ Each parallel size clearly marked. ~ Case hardened RC 52 to 58. ~ Complete with fitted wood case. ~ Total parallelism within the entire length to .0002". ~ Flatness or straightness to .0002". ~ Height dimensions are + or - .0002". ~ Width/thickness to + or - .005". ~ 2 holes in each parallel.