|
|
-
4.2 of 5.0 with 18 Reviews
SALE PRICE: $130.84 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611147-516
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611147-516
|
The Mitutoyo grade K rectangular gage block is made of steel, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself.This grade K gage block is commonly used for reference applications in temperature-controlled academic research facilities, such as a calibration laboratories or inspection rooms, to verify the accuracy of gage blocks used in calibration. It is manufactured by absolute measurement using an interferometer to minimize surface irregularities. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior.This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish.Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate m...
-
4.2 of 5.0 with 45 Reviews
SALE PRICE: $131.54 38% OFF
Manufacturer: L.S. Starrett
Brand: Starrett
Manufacturer: L.S. Starrett
Brand: Starrett
End Measuring Rod is used for checking and setting micrometers of 2 capacity and larger. Also use on machine tools for comparing gages, checking precision measuring tools, and measuring parallel surfaces. Insulated handles minimize expansion by heat when held in the hand. This listing is for each. Technical Specification Item End Measuring Rod w/Grip Dia. 11mm Range 350mm For Use With 375mm Micrometers, Includes Insulating Rubber Handle
-
4.2 of 5.0 with 45 Reviews
SALE PRICE: $131.54 38% OFF
Manufacturer: L.S. Starrett
Brand: Starrett
Manufacturer: L.S. Starrett
Brand: Starrett
End Measuring Rod is used for checking and setting micrometers of 2 capacity and larger. Also use on machine tools for comparing gages, checking precision measuring tools, and measuring parallel surfaces. Insulated handles minimize expansion by heat when held in the hand. This listing is for each. Technical Specification Item End Measuring Rod w/Grip Dia. 11mm Range 350mm For Use With 375mm Micrometers, Includes Insulating Rubber Handle
-
4.2 of 5.0 with 24 Reviews
SALE PRICE: $134.00
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613853-521
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613853-521
|
The Mitutoyo grade 00 rectangular gage block is made of ceramic, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of ceramic which resists corrosion, abrasion, and burrs, can withstand high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in metric [millimeter (mm)], and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 9 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calib...
-
4.2 of 5.0 with 6 Reviews
SALE PRICE: $136.55
Manufacturer: Tuthill
Brand: Fill-Rite
Model: KIT702FP
Manufacturer: Tuthill
Brand: Fill-Rite
Model: KIT702FP
Built into every fuel transfer pump, chemical transfer pump and meter is over 50 years of experience—and the pride and workmanship associated with the moniker “Made in USAâ€. We use only the most durable materials to insure long life and dependability. Fill-Rite and Sotera branded products deliver superior performance time and time again, regardless of the application or installation.
-
4.2 of 5.0 with 25 Reviews
SALE PRICE: $139.00 1% OFF
Manufacturer: GASCO
Brand: Gasco
Manufacturer: GASCO
Brand: Gasco
70 Series Calibration Gas Regulator for NON-reactive Calibration Gas Mixtures, Cylinders: 34LA Aluminum, 58L, 74L, 116L and 103 Steel Cylinders, ecosmart cylinders: 44es,58es,66es, and 116es
-
4.2 of 5.0 with 36 Reviews
SALE PRICE: $139.00 1% OFF
Manufacturer: GASCO
Brand: Gasco
Manufacturer: GASCO
Brand: Gasco
70 Series Calibration Gas Regulator for NON-reactive Calibration Gas Mixtures, Cylinders: 34LA Aluminum, 58L, 74L, 116L and 103 Steel Cylinders, ecosmart cylinders: 44es,58es,66es, and 116es
-
4.2 of 5.0 with 18 Reviews
SALE PRICE: $139.00 1% OFF
Manufacturer: GASCO
Brand: Gasco
Manufacturer: GASCO
Brand: Gasco
70 Series Calibration Gas Regulator for NON-reactive Calibration Gas Mixtures, Cylinders: 34LA Aluminum, 58L, 74L, 116L and 103 Steel Cylinders, ecosmart cylinders: 44es,58es,66es, and 116es
-
4.2 of 5.0 with 28 Reviews
SALE PRICE: $139.00 1% OFF
Manufacturer: GASCO
Brand: Gasco
Manufacturer: GASCO
Brand: Gasco
70 Series Calibration Gas Regulator for NON-reactive Calibration Gas Mixtures, Cylinders: 34LA Aluminum, 58L, 74L, 116L and 103 Steel Cylinders, ecosmart cylinders: 44es,58es,66es, and 116es
-
4.2 of 5.0 with 27 Reviews
SALE PRICE: $144.00
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 616201-531
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 616201-531
|
The Mitutoyo grade 0 square gage block is made of ceramic, has its nominal length engraved in inches, is supplied with a certificate of inspection, meets ASME B89.1.9.2002 standards, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of ceramic which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.95 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to cal...
|
|