Dimensional Calibration - Page 99

Manufacturer: The L.S. Starrett Company Brand: Starrett

Starrett 234A-22 End Measuring Rod, w/rubber handle, micrometer accessories, 7/16 inch diameter range

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe 599-749-1 includes two mild steel blocks and one clamp, and is suitable for large, heavy work. Mild steel provides strength and durability, and the blocks feature squareness for increased usability, accuracy, and measurement consistency. Blocks feature two clamping grooves and lower grooves that allow blocks to be clamped to work surface. Sides are square with each other within .003”, ends are square with sides within .003”, v-groove is parallel and central with sides within .002”, and v’s of pairs are central and parallel to each other within .004”. V-groove is 90 degrees + or - ½ degrees. Dimensions are 2-1/2” (64 mm) square x 3” (76 mm) long. Work capacity is approximately 1/2” to 2-1/2” (13 to 64 mm) diameter. V-blocks are small part work holders. They are held in place with the assistance of a clamp. The grove allows a channel for the clamp to hold down the part being measured or modified. Brown & Sharpe was founded in 1833, had a major part in setting industrial standards in the United States, and has given its name to several standards, including a tool spindle taper, a worm threadform, and others. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and has since focused on precision measuring equipment and metrology hand tools. The Brown & Sharpe line of coordinate measuring machines (CMMs), optical measuring systems, benchtop measuring machines, and precision hand tools offer consistent, high-quality design, construction, and performance. Brown & Sharpe has manufacturing facilities in North America, Switzerland, and China.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 53-680-050-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Starrett Brand: Starrett Model: 83027

The use of surface plate covers to protect precision granite investment. Prevent abrasive build up on plates with cover made from heavy gauge vinyl with a soft interior lining. Cover provide a tough, durable, protective outside with a soft cushion inside.

Manufacturer: TTC Brand: TTC

Supplied with a certificate of accuracy only. Includes: 1 block x 1.005mm, 9 blocks x 1.01 to 1.09mm (step of .01mm), 9 blocks x 1.1 to 1.09mm (step of .1mm), 24 blocks x 1 to 24mm (step of 1mm), 4 blocks x 25 to 100mm (step of 25mm)

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

Manufacturer: Starrett Brand: Starrett

Starrett C11MEH-300 COMBINATION SQUARE

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 177-186

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe gage block micrometer checking set includes a set of 10 gage blocks and two optical flats that are used to verify the measuring accuracy of micrometers with a 0 to 1" measuring range. Two optical flats have a 0.500" and 0.5125" diameter and are used to verify the flatness of anvil faces at half revolutions of the micrometer spindle. Grade 2 high-alloy steel gage blocks have a hardness of 800 HV (Vickers Pyramid Number) and are artificially aged to ensure stability. The gage blocks meet federal specification GGG-C-15c and MIL-STD-45662A, are individually inscribed with a serial number for identification, and include a Certificate of Calibration. Grade 2 gage blocks are commonly used as Working Standards in inspection rooms to set and calibrate measuring instruments and other equipment as well as to inspect tools, fixtures, and machines. Gage block sizes include 0.105", 0.210", 0.315", 0.420", 0.500", 0.605", 0.710", 0.815", 0.920", and 1.00". The gage block and optical flat set includes a fitted wooden box. Gage blocks (also called gauge blocks, Jo blocks, Hoke blocks, and Johansson gauges) are precision ground and lapped metal or ceramic blocks, used for calibrating precision measuring equipment and as a length standard in manufacturing. Gage blocks are square or rectangular in shape, with flat and parallel measuring surfaces, and usually have an engraved unique serial number and nominal length (provided in either inches or millimeters). They often come in sets with blocks of varying lengths, so that many different standard lengths can be created by stacking and wringing them. Wringing is the process of sliding blocks together with a small amount of pressure, in order to create a longer gage block stack.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, is headquartered in North Kingstown, RI.What's in the Box?1.00 micrometer gage block.920 micrometer gage block.815 micrometer gage block.710 micrometer gage block.605 micrometer gage...

Manufacturer: iGaging Brand: iGaging Model: 36-036-0

36 PC grade as-0 gage block set USA (No Suggestions). Certified each set comes with a certificate of calibration traceable to NIST and each gage block is etched with a unique serial number. The certificate was issued by the factory at the time of manufacture. Features: Super high tolerance each block is marked with a serial number matching the included NIST certificate grade as-0 36 pieces included: 1 block 0.050 10 blocks 0.1000 thru 0.1009 in step of 0.0001 inch 9 blocks 0.101 thru 0.109 in step of 0.001 inch 9 blocks 0.110 thru 0.190 in step of 0.01 inch 4 blocks 0.200 thru 0.500 in step of 0.1 inch 2 blocks 1.000 thru 2.000 in step of 1.000 inch 1 block 4.000 wood case.