Reference Gauges - Page 4

Manufacturer: Vermont Gage Brand: Vermont Gage

The Vermont Gage steel go (+) plug gage is a class ZZ metric gage for calibrating measuring equipment and gage parts. A certificate of accuracy traceable to National Institute of Standards and Technology (NIST) is available for each gage, and each pin is marked with its size and direction of tolerance in sizes over .060”. Each gage is sealed in a volatile corrosion inhibitor (VCI) bag and packaged with a rust preventative. All gages are made of cold-stabilized tool steel 60/62 Rockwell c (Rc), measure 2” long, are within .00001” round (per ASME B89.1.5), and have at least a 10-microinch finish for a smooth finish. Sizes are available from .20 mm to 25.50 mm in increments of .02 mm, with a tolerance of -.005 mm for longer wear. Plug gages are precision-ground cylindrical steel plugs used to measure the diameter and depth of drilled or machined holes. They are available in different classes, based on acceptable tolerance (allowed deviation from the stated size). Standard tolerances and classes for cylindrical gages up to .825” are as follows: Class XX (.00002" or .0005 mm), Class X (.00004" or .0010 mm), Class Y (.00007" or .0018 mm), Class Z (.0001" or .0025mm), and Class ZZ (.0002" or .0050 mm). For gages with a wider diameter, tolerance gradually increases for each class. Vermont Precision Tools manufactures precision round and ground pins, perforators, and special punches. The company, founded in 1968 and headquartered in Swanton, VT, formed Vermont Gage division in 1980 to manufacture fixed limit gages. It meets International Organization for Standardization (ISO) 9001:2000 standards.

Manufacturer: uxcell Brand: uxcell

Steel taperlock handle. 2 colors.Used for gaging internal thread.Double end, steel material. Go/no go design.Convenient to measure with hex handle. Ideal measuring tool.Used widely in car, motor, machinery, etc.

Manufacturer: Vermont Gage Brand: Vermont Gage

The Vermont Gage steel go (+) plug gage is a class ZZ metric gage for calibrating measuring equipment and gage parts. A certificate of accuracy traceable to National Institute of Standards and Technology (NIST) is available for each gage, and each pin is marked with its size and direction of tolerance in sizes over .060”. Each gage is sealed in a volatile corrosion inhibitor (VCI) bag and packaged with a rust preventative. All gages are made of cold-stabilized tool steel 60/62 Rockwell c (Rc), measure 2” long, are within .00001” round (per ASME B89.1.5), and have at least a 10-microinch finish for a smooth finish. Sizes are available from .20 mm to 25.50 mm in increments of .02 mm, with a tolerance of -.005 mm for longer wear. Plug gages are precision-ground cylindrical steel plugs used to measure the diameter and depth of drilled or machined holes. They are available in different classes, based on acceptable tolerance (allowed deviation from the stated size). Standard tolerances and classes for cylindrical gages up to .825” are as follows: Class XX (.00002" or .0005 mm), Class X (.00004" or .0010 mm), Class Y (.00007" or .0018 mm), Class Z (.0001" or .0025mm), and Class ZZ (.0002" or .0050 mm). For gages with a wider diameter, tolerance gradually increases for each class. Vermont Precision Tools manufactures precision round and ground pins, perforators, and special punches. The company, founded in 1968 and headquartered in Swanton, VT, formed Vermont Gage division in 1980 to manufacture fixed limit gages. It meets International Organization for Standardization (ISO) 9001:2000 standards.

Manufacturer: Stanley Proto Brand: Stanley-Proto Model: J00MM15

Stanley J00MM15 Proto 15 Blade Metric Feeler Gauge Set 1/2-inch x 3-inch metric blades in steel holder. Sizes: 0.06mm, 0.07mm, 0.08mm, 0.10mm, 0.15mm, 0.20mm, 0.25mm, 0.30mm, 0.35mm, 0.40mm, 0.45mm, 0.50mm, 0.55mm, 0.60mm, 0.70mm. Fifteen blade metric feeler gauge set 0.13-lbs Weight.

Manufacturer: Williams Brand: Williams Model: GS-3

Eyebolts are forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability of breakage. Each lot is tested and inspected to insure conformance to specifications.

Manufacturer: Amico Brand: Amico

0.1mm Accuracy 15mm-30mm Taper Gauge Feeler Gap Hole Measuring Tool.

Manufacturer: Vermont Gage Brand: Vermont Gage

The Vermont Gage steel go (+) plug gage is a class ZZ metric gage for calibrating measuring equipment and gage parts. A certificate of accuracy traceable to National Institute of Standards and Technology (NIST) is available for each gage, and each pin is marked with its size and direction of tolerance in sizes over .060”. Each gage is sealed in a volatile corrosion inhibitor (VCI) bag and packaged with a rust preventative. All gages are made of cold-stabilized tool steel 60/62 Rockwell c (Rc), measure 2” long, are within .00001” round (per ASME B89.1.5), and have at least a 10-microinch finish for a smooth finish. Sizes are available from .20 mm to 25.50 mm in increments of .02 mm, with a tolerance of -.005 mm for longer wear. Plug gages are precision-ground cylindrical steel plugs used to measure the diameter and depth of drilled or machined holes. They are available in different classes, based on acceptable tolerance (allowed deviation from the stated size). Standard tolerances and classes for cylindrical gages up to .825” are as follows: Class XX (.00002" or .0005 mm), Class X (.00004" or .0010 mm), Class Y (.00007" or .0018 mm), Class Z (.0001" or .0025mm), and Class ZZ (.0002" or .0050 mm). For gages with a wider diameter, tolerance gradually increases for each class. Vermont Precision Tools manufactures precision round and ground pins, perforators, and special punches. The company, founded in 1968 and headquartered in Swanton, VT, formed Vermont Gage division in 1980 to manufacture fixed limit gages. It meets International Organization for Standardization (ISO) 9001:2000 standards.

Manufacturer: ABS Import Tools Brand: HHIP

Comfortable, ergonomically made handle for pin gages. | Made from aluminum and powder coated. | Can be used with GO pin (green) on one end, NO GO pin (red) on opposite end.

Manufacturer: Vermont Gage Brand: Vermont Gage

The Vermont Gage steel no-go (-) plug gage is a class ZZ metric gage for calibrating measuring equipment and gage parts. A certificate of accuracy traceable to NIST is available for each gage, and each pin is marked with its size and direction of tolerance in sizes over .060”. Each gage is sealed in a volatile corrosion inhibitor (VCI) bag and packaged with a rust preventative. All gages are made of tool steel 60/62 Rc (cold stabilized), measure 2” long, are within .00001” round (per ASME B89.1.5), and have at least a 10-microinch finish for a smooth finish. Sizes are available from .20 mm to 25.49 mm (increments of .02 mm), with a tolerance of -.005 mm for longer wear. Plug gages are precision ground cylindrical steel plugs used to measure the diameter and depth of drilled or machined holes. They are available in different classes, based on acceptable tolerance (allowed deviation from the stated size). Standard tolerances and classes for cylindrical gages up to .825” are as follows: Class XX (.00002" or .0005 mm), Class X (.00004" or .0010 mm), Class Y (.00007" or .0018 mm), Class Z (.0001" or .0025mm), and Class ZZ (.0002" or .0050 mm). For gages with a wider diameter, tolerance gradually increases for each class. Since 1968, Vermont Precision Tools, Inc. (VPT) has been manufacturing a variety of precision round and ground pins, perforators, and special punches. Vermont Gage was formed in 1980, and manufactures a wide range of fixed limit gages. Located in Swanton, Vermont and Franklin, Kentucky, Vermont Gage manufactures 98% of the products they sell and is ISO 9001:2000 and ISO 17025 quality certified.

Manufacturer: iGaging Brand: iGaging

Professional Precision Tool Measure gap widths easily with iGaging Ultra Precision Feeler Gauge 26 blades with 3-1/4" one-piece handleDecimal sizes laser etched on each bladeBlade contstructed of hardened, tempered steelBlade protector with thumb notch for easy blade removal