Reference Gauges - Page 58

Manufacturer: Vermont Gage Brand: Vermont Gage

The Vermont Gage steel no-go (-) plug gage is a class ZZ inch gage for calibrating measuring equipment and gage parts. A certificate of accuracy traceable to NIST is available for each gage, and each pin is marked with its size and direction of tolerance in sizes over .060”. Each gage is sealed in a volatile corrosion inhibitor (VCI) bag and packaged with a rust preventative. All gages measure 2” long, are within .00001” round (per ASME B89.1.5), and have at least a 10-microinch finish for a smooth finish. This gage is made of tool steel 60/62 Rc (cold stabilized) for durability and is available with either a steel or black guard finish (to inhibit corrosion and for indicating wear). Sizes are available from .0040” to 1.0005” (increments of .001”), with a tolerance of -.0002” for longer wear. Plug gages are precision ground cylindrical steel plugs used to measure the diameter and depth of drilled or machined holes. They are available in different classes, based on acceptable tolerance (allowed deviation from the stated size). Standard tolerances and classes for cylindrical gages up to .825” are as follows: Class XX (.00002" or .0005 mm), Class X (.00004" or .0010 mm), Class Y (.00007" or .0018 mm), Class Z (.0001" or .0025mm), and Class ZZ (.0002" or .0050 mm). For gages with a wider diameter, tolerance gradually increases for each class. Since 1968, Vermont Precision Tools, Inc. (VPT) has been manufacturing a variety of precision round and ground pins, perforators, and special punches. Vermont Gage was formed in 1980, and manufactures a wide range of fixed limit gages. Located in Swanton, Vermont and Franklin, Kentucky, Vermont Gage manufactures 98% of the products they sell and is ISO 9001:2000 and ISO 17025 quality certified.

Manufacturer: Vermont Gage Brand: Vermont Gage Model: 911294800

Cl ZZ (.0002" or .005mm tolerance),go (Plus) or no go (minus),available in blackguard or steel, NIST traceable, tool steel 60/65Rc, 2" long pins, certificate of accuracy included .

Manufacturer: Gages Brand: Gages

For grinding & setting tools when cutting Acme threads whose sides have an inclination of 14 1/2 Degree. Angles & edges are precision-ground.

Manufacturer: Starrett Brand: Starrett Model: 667-1/2

This gauge is widely used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, gauge and experimental work.

Manufacturer: Vermont American Brand: Vermont American

Screw Pitch Gauge, U.S. Thread Counts, Steel, Measures Screw Pitches on V Threads, Range U.S. Thread Counts (10-40)

Manufacturer: CISNO Brand: CISNO

Specification: Material:Steel（65#Mn） Length:3.5" Package include: 1 x Feeler Gauge

Manufacturer: CISNO Brand: CISNO

Specification: Material:Steel（65#Mn） Length:3.5" Package include: 1 x Feeler Gauge

Manufacturer: Vermont Gage Brand: Vermont Gage

The Vermont Gage steel go (+) plug gage is a class ZZ inch gage for calibrating measuring equipment and gage parts. A certificate of accuracy traceable to NIST is available for each gage, and each pin is marked with its size and direction of tolerance in sizes over .060”. Each gage is sealed in a volatile corrosion inhibitor (VCI) bag and packaged with a rust preventative. All gages measure 2” long, are within .00001” round (per ASME B89.1.5), and have at least a 10-microinch finish or better for a smooth finish. This gage is made of tool steel 60/62 Rc (cold stabilized) for durability and has a black guard finish to inhibit corrosion and for indicating wear. Sizes are available from .0040” to 1.0005” (increments of .001”), with a tolerance of +.0002” for longer wear. Plug gages are precision ground cylindrical steel plugs used to measure the diameter and depth of drilled or machined holes. They are available in different classes, based on acceptable tolerance (allowed deviation from the stated size). Standard tolerances and classes for cylindrical gages up to .825” are as follows: Class XX (.00002" or .0005 mm), Class X (.00004" or .0010 mm), Class Y (.00007" or .0018 mm), Class Z (.0001" or .0025mm), and Class ZZ (.0002" or .0050 mm). For gages with a wider diameter, tolerance gradually increases for each class. Since 1968, Vermont Precision Tools, Inc. (VPT) has been manufacturing a variety of precision round and ground pins, perforators, and special punches. Vermont Gage was formed in 1980, and manufactures a wide range of fixed limit gages. Located in Swanton, Vermont and Franklin, Kentucky, Vermont Gage manufactures 98% of the products they sell and is ISO 9001:2000 and ISO 17025 quality certified.

Manufacturer: Radnor Brand: Radnor Model: 64003451

2X4000 Gauge Brass

Manufacturer: Meyer Gage Brand: Meyer Gage Model: .1561XP

Meyer Gage Company, a world leader in the manufacture of fixed limit gages offers these affordable class x individual pin gages in Plus ( +.00004” / -.00000” ) and come packaged in a reusable zip lock bag. Used to measure hole sizes, calculate distances between holes, gage slot widths and can also be used for Go or No-Go gaging. (Note diameters above .8250″ tolerance increases, see gage makers tolerance chart) Uses – for precision GO/NOGO measuring of hole sizes and depths, checking hole location and distance, and setting micrometers. All gages are uniformly 2″ long with ground ends, allowing you to use both ends for increased gage life. Gages are Carbon Chrome Alloy Steel (grade E52100 bearing quality steel) and heat treated to 60-62 Rockwell C hardness. All of our products come with a Certificate of Class Conformance, traceable to NIST (National Institute for Standards Technology). The size and “+” (GO) or “-” (NOGO) are laser etched with a Meyer Exclusive Serial Number Feature to ensure traceability on the shop floor on all gages that are .061″ and larger. Founded in 1960 Meyer Gage Company is an ISO 9001:2008 approved manufacturer, and all products pass through our ISO /IEC 17025:2005 approved laboratory for final inspection.