Hole Gauges - Page 12

Manufacturer: TTC Brand: TTC

Plunger of gages expand from center, under spring tension, to size of hole being measured and is then locked in place by knurled knob. Measurement is made by a micrometer or a caliper.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 155-126U

Mitutoyo Telescoping Gage, Range: 3-1/2" to 6"

Manufacturer: Flexbar Brand: Flexbar

Universal Caliper Accessory Kit Measures places otherwise impossible to reach. It Can be turned 180° for Groove Measuring. The original Caliper Jaw Attachment accessory. The Square bodies attach to the Jaws of any 4", 6", 8" Caliper. Threaded holes are located in the front, both sides, and the bottoms of the bodies, allowing the use of the Points on any side. Measures slots, Grooves, shoulders, holes, Pockets, and takes ID and OD Measurements. Steel, Black Oxide plated, Made in USA. Model No. 16999,Universal Caliper Accessory Kit (Does Not include Caliper) Kit Contains: (2) Universal Caliper bodies, (4) pair (8 Pcs) Accessory Points: (2) Flat, (2) Conical, (2) Stem, (2) Ball End, Allen Wrench included. User friendly instructions.

Manufacturer: Starrett Brand: Starrett Model: 579A-8

Telescoping gauge is used for determining the true size of holes, slots, and recesses up to 6". The ends of both contact is hardened and ground to a radius to allow proper clearance on the smallest hole the gauge will enter. This tool must be slightly "rocked" in the hole being measured to ensure that the tool is on the proper diameter before it is locked and withdrawn. The final hole size is obtained by measuring over the gauge contact with a micrometer.

Manufacturer: Fuji Tool Brand: Gages

Set measures .125" to .5" (.125-.200, .200-.300, .300-.400, .400-.500) - 4 gages in a case. Gaging surface on premium quality model GA-SM290 is a half ball with a flat bottom, fully hardened - offered here at a fraction of its regular price. Knurled knob at end of handle is used for size adjustment. Hole size is obtained by measuring over the contact points with a micrometer.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 154-104

Mitutoyo Small Hole Gage, Range: 10mm to 13mm

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 155-130

Mitutoyo Telescoping Gage, Range: 32mm to 54mm

Manufacturer: TTC Brand: TTC

Plunger of gages expand from center, under spring tension, to size of hole being measured and is then locked in place by knurled knob. Measurement is made by a micrometer or a caliper.

Manufacturer: MITUTOYO Brand: Mitutoyo

5/16 to 1/2 in Telescoping Gage|Telescoping Gage, .313-.50" Spring-loaded plunger expands within the bore (or groove), allowing determination of the internal diameter (or groove width)With a knurled clamp

Manufacturer: MEDI Instrument inc Brand: MEDI Instrument inc

Zaldivar Fixation Ring & Degree Gauge