Outside Micrometers - Page 25

Manufacturer: Starrett Brand: Starrett Model: T444.1XRL-1

Outside Micrometer .0001" Grad, 0-1" Range, Ratchet Stop, Lock Nut, Carbide Faces. The Starrett have heat-insulators on the frame to help reduce temperature-related expansion or contraction. The Vernier scale on the thimble and sleeve is graduated to 0.001", with a satin chrome rust and glare-resistant finish on the thimble. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-870-002-0

The Fowler 54-870 series digital outside micrometer has a flat anvil/spindle pair, a choice of measuring range, an LCD with an inch/metric switchable resolution, and is designed for general purpose measuring. A switchable resolution of 0.00005" and 0.001mm, and an accuracy of 0.00016"/0.004mm provide precise readings and accurate measurements. Carbide measuring faces provide long life and wear resistance. A ratchet thimble applies consistent force for repeatability between users. A jet back and grey enamel finish provide durability and wear resistance. The LCD has a hold feature that saves the reading for recording. The micrometer can be set to take absolute or incremental measurements. Absolute measurements provide the total dimension of the workpiece. Incremental measurements provide a reading that shows the difference between a set standard and workpiece being measured. This type of reading is often used to determine if a workpiece falls within tolerance levels. An automatic shut-off feature extends battery life. RS-232 output transfers data to a computer (cable not included). The micrometer requires a CR2032 battery (included), and includes a fitted case. SpecificationsDisplay typeLCDAnvil/spindle styleFlatMeasuring rangeVariesResolution0.00005"/0.001mmAccuracy0.00016"/0.004mmThimble styleRatchetData outputRS-232PowerCR2032Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The Fred V...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 193-101

The Mitutoyo 193 series digit outside micrometer has a mechanical digit counter for precise reading to 0.01mm, a vernier scale in metric units for taking precise outside diameter (OD) measurements, a ratchet-stop mechanism for uniform pressure during adjustment, and carbide faces for wear resistance.The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.01mm or 0.001mm depending on the model, and has a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 103-260CAL

The Mitutoyo 103 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism for uniform pressure during adjustment. The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001”, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 193-111

The Mitutoyo 193 series digit outside micrometer has a mechanical digit counter for precise reading to 0.01mm, a vernier scale in metric units for taking precise outside diameter (OD) measurements, a ratchet-stop mechanism for uniform pressure during adjustment, and carbide faces for wear resistance.The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.01mm or 0.001mm depending on the model, and has a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 193-112

The Mitutoyo 193 series digit outside micrometer has a mechanical digit counter for precise reading to 0.01mm, a vernier scale in metric units for taking precise outside diameter (OD) measurements, a ratchet-stop mechanism for uniform pressure during adjustment, and carbide faces for wear resistance.The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.01mm or 0.001mm depending on the model, and has a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Reed Brand: Reed Instruments Model: DC-516

The REED Digital Micrometer has a 6 digit LCD display and features a mm/inch select and zero button.

Manufacturer: ASIMETO Brand: ASIMETO Model: 105-01-5

Carbide tipped, IP65 Digital Micrometers & Sets, ASIMETO

Manufacturer: iGaging Brand: iGaging

Professional Tool, SUPER Precision Crisp, clear, easy-to-read LCD display, accurate to 0.00016". Hardened and ground spindle with carbide anvil ensure durability and accuracy. Comes in a case with adjustment wrench, instructions booklet, ball attachment and extra battery. Features: BONUS: Ball attachment2 measuring modes Metric/Inch Standard Large LCD Display Absolute & Incremental Modes Automatic Switch Off Accuracy +/- 0.00016" Range 3-4"/75-100mm Resolution 0.00005"/0.001mm Carbide Measuring Surfaces Direct USB SPC Output availableMeet or Exceeds Federal Accuracy Standards Professional Tool, SUPER Precision Crisp, clear, easy-to-read LCD display, accurate to 0.00016". Hardened and ground spindle with carbide anvil ensure durability and accuracy. Comes in a case with adjustment wrench, instructions booklet, ball attachment and extra battery. Features: BONUS: Ball attachment2 measuring modes Metric/Standard Large LCD Display Absolute & Incremental Modes Automatic Switch Off Accuracy +/- 0.00016" 3 Micrometers Range:0-1"/0-25mm1-2"/25-50mm 2-3"/50-75mm Resolution 0.00005"/0.001mm Carbide Measuring Surfaces Direct USB SPC Output availableMeet or Exceeds Federal Accuracy Standards

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 293-230-30

Digimatic MIC 0-25 mm with SPC Output.