Outside Micrometers - Page 30

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-225-116-0

The Fowler Economy Depth Micrometers, depending on the model, have a measurement range of 0 to 4" or 0 to 6", a base of 2.5" or 4", and a resolution (or smallest graduation interval) of 0.001", with + or – 0.001" of accuracy. The vernier scale provides precise measurements in fine units. Depending on the range of the model, the gauges include either or 0.176" diameter measuring rods. The units have a ratchet thimble and locking clamp for accuracy. The bases of the units are ground, hardened, and lapped for durability and accuracy. They have a satin chrome finish to reduce glare when reading measurements. They come with two wrenches and a hardened case. The gauges conform to Federal Accuracy specifications. Depth gauges are typically used in manufacturing, machining, and mechanical engineering. Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.The Fred V. Fowler Company manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.

Manufacturer: ASIMETO Brand: ASIMETO Model: 116-03-1

Carbide tipped, Digital Micrometers & Sets, ASIMETO

Manufacturer: Fowler Brand: Fowler

Includes case An advanced design micrometer series featuring superior quality, perfect balance and full-finish tapered frame. Economical in price, these tools receive special care in design and workmanship to ensure high precision and long life. Fowler Micrometers meet or exceed Federal specifications for accuracy. The perfect micrometer for all around measuring. Features Satin chrome finish forged steel frame is tapered for hard to get at locations Decimal equivalents on frame are black for good contrast against the satin chrome Sleeve and thimble have microfine black graduations contrasted with satin chrome. Anvil and spindle carefully hardened and precision ground, with microlapped ends Ultra-positive locking clamp to ensure reliable measurement setting at all times Smooth action ratchet style thimbles for exact and repetitive settings Wear-resistant carbide faces on anvil and spindle precision ground and microlapped. Diameter of measuring faces: .256" Flatness: .00003" Parallelism: .00005" Accuracy: .0001" A spanner wrench is included with each tool for quick and easy zero adjustment

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 147-202

The Mitutoyo 147 series can seam micrometer has a vernier scale in metric units and a ratchet-stop mechanism that helps provde uniform pressure for taking measurements of the width, height and depth of can seams. The micrometer is made of high-grade tool steel for durability, with a satin chrome rust- and glare-resistant finish. The vernier scale on the thimble and sleeve is graduated to 0.01mm. The spindle and anvils are made of hardened steel for durability. The unit comes with a fitted carton for storage. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Starrett Brand: Starrett Model: 3732XFL-2

The Starrett 3732 Electronic Micrometer is a full-featured precision measuring tool built with customary Starrett quality and workmanship. The 3732 series includes a large, easy-to-read, high-contrast LCD digital readout for clear readings. With its automatic OFF functionality, smooth friction thimble for uniform pressure, and balanced frame design, Starrett products provide comfortable and accurate measuring Its no-glare satin chrome finish minimizes annoying surface glare under bright lights indoors or filters out UV light.

Manufacturer: INSIZE Brand: INSIZE Model: 3262-1

Interchangeable anvil micrometer, 0-1", graduation 0001".

Manufacturer: Fowler Brand: Fowler

Package Includes: Fowler Electronic Micrometer Carrying Case Features Water Resistant to IP54 specifications. True inch/metric conversion. Friction thimble Large easy-to-read LCD display Resolution: .00005 /.001mm. Direct RS232 output Accuracy: 0.00016 Use for measuring the outside diameters of workpieces with narrow grooves, T-slots and other dimensions blocked by shoulders or lands inaccessable by standard micrometers.

Manufacturer: INSIZE Brand: INSIZE Model: 3232-2

Blade micrometer, 1-2", graduation 0001".

Manufacturer: Fowler Brand: Fowler

Package Includes: Fowler Electronic Micrometer Carrying Case Features Water Resistant to IP54 specifications. Carbide measuring faces True inch/metric conversion. Direct RS232 output Resolution: .00005 /.001mm Accuracy: .00015 /.004mm Measure dimensions from inside of circular holes to outside edges and obtain accurate dimensions

Manufacturer: Starrett Brand: Starrett Model: 232MRL

This micrometer is a 1/2 inches (13mm) companions of the top-of-the-line No. 230 series micrometers. Rigid one-piece frame of drop forged steel. Micro-lapped measuring faces. Quick and easy adjustment. Balanced frame and thimble design insure easy handling and better readability. Ring-type knurled lock nut for quick and sure locking. Gracefully designed tapered frame for use in narrow slots and tight places.