Outside Micrometers - Page 33

Manufacturer: STARRETT Brand: Starrett

0'' - 1'' OUTSIDE MICROMETER & SET - MODEL #: T436.1XFL-1

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 293-240

The Mitutoyo 293 series Coolant Proof LCD micrometer has a digital single-value LCD readout that displays in metric units with resolution to 0.001mm for outside diameter (OD) measurement, and a ratchet-stop mechanism that helps provide precise, repeatable measurement. The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. On some models, an output jack transmits Statistical Process Control (SPC) data results to a computer or external device through an interface cable (sold separately). The electronics housing has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet.. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, wh...

Manufacturer: Fowler Brand: Fowler

Features 60 pointed spindle with blade anvil for grooves and hard to reach dimensions Protected to IP54 specifications Large LCD display, 8.5mm Automatic switch off Hardened steel measuring face Absolute /25mm include standard

Manufacturer: Fowler Brand: Fowler

Includes wrench and case Series No. 52-248 offers Fowler standards of fine quality and accuracy. A variety of sizes covers a range of measuring applications. Features Hammertone blue baked enamel finish Microfine graduations on satin chrome finish and carbide tipped measuring faces Ratchet stop thimble for exact and repetitive readings Spindle thread is hardened, ground and lapped Anvil & spindle hardened and precision ground with microlap finish on tips All micrometers meet or exceed U.S. Federal specifications for accuracy Includes standard

Manufacturer: iGaging Brand: iGaging

Professional Tool, High Precision Crisp, clear, easy-to-read LCD display, accurate to 0.00016". Hardened and ground spindle with carbide anvil ensure durability and accuracy. Comes in a case with adjustment wrench, instructions booklet, ball attachment and extra battery. Features: BONUS: Ball attachment2 measuring modes Metric/Standard Large LCD Display Absolute & Incremental Modes Automatic Switch Off Accuracy +/- 0.00016" Range 0-1"/0-25mm, 1-2"/25-50mm, 2-3"/50-75mm Resolution 0.00005"/0.001mm Carbide Measuring Surfaces Direct USB SPC Output availableMeet or Exceeds Federal Accuracy Standards

Manufacturer: Ohaus Brand: Ohaus

Accurate and dependable, the original OHAUS Triple Beam balance has been the standard in science classrooms for decades.  Whether you’re weighing solids, liquids, powders or even animals, an OHAUS Triple Beam balance is well equipped to handle the job.  These balances offer the accuracy and convenience of a toploading balance while allowing students to gain hands-on experience through manipulation of the poises and attachment weights (sold separately), as well as to visualize mass measurement principles. The 700 Series accommodates a range of laboratory and education applications. Some models have a tare beam to allow containers up to 225g to be balanced out, and a variety of weighing platforms are also available. The OHAUS Dial-O-Gram® Series combines the convenience of direct-reading dial calibration with the speed of magnetic damping for a balance that accurately and quickly weighs everything.

Manufacturer: Starrett Brand: Starrett Model: 796XRL-1

The Starrett 795XRL series LCD outside micrometer has a digital single-value LCD readout that displays in inch and metric units with resolution to 0.00005” (0.001mm) for outside diameter (OD) measurement, and a vernier scale in inch units for taking precise outside diameter (OD) measurements. The micrometer has an Ingress Protection 67 (IP67) rating, which means that components are resistant to debris and to submersion in liquid under standard conditions for up to 30 minutes.The micrometer’s electronic microprocessor can preset, hold, or limit measurement at any position, as well as set a temporary zero position and return to a true zero reading. An automatic off function helps preserve battery life when the unit is not in use. Depending on the model, it may have Statistical Process Control (SPC) data output to transmit results to a computer or external device through an interface cable (sold separately).The micrometer’s frame has a black wrinkle finish that helps resist rust and reduce glare. A ratchet-stop mechanism helps provide uniform pressure for precise, repeatable measurement. The vernier scale on the thimble and sleeve has a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position. The micrometer includes, and is powered by, a single CR2032 lithium cell battery. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are ty...

Manufacturer: Starrett Brand: Starrett Model: 208Z

The Starrett 208 series can seam micrometer has a vernier scale in inch units for taking measurements of the width, height and depth of can seams. The micrometer is made of stainless steel for durability, with a satin chrome rust- and glare-resistant finish, and a knurled sleeve that helps provide a secure grip. The vernier scale on the thimble and sleeve is graduated to 0.001” for taking precise outside diameter (OD) measurements. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Model: 599-1-34

The Brown & Sharpe enamel frame outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, a convertible friction drive thimble mechanism for uniform or variable pressure during adjustment, and tungsten carbide faces for wear resistance.The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.0001” with conventional straight markings, and has a satin chrome rust- and glare-resistant finish. The ratchet mechanism can be disabled for variable adjustment control. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position.< /p>Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: 2312-5010