Outside Micrometers - Page 39

Manufacturer: Hexagon Metrology Brand: Standard Gage

The Standard Gage LCD IP54-rated outside micrometer has a digital single-value LCD readout that displays in inch and metric units with resolution to 0.00005” (0.001mm) for outside diameter (OD) measurement. The micrometer’s electronic microprocessor can set a temporary zero position, and return to a true zero reading. An automatic off function helps preserve battery life when the unit is not in use. The electronics housing has an Ingress Protection 54 (IP54) rating, which means that components are resistant to debris and to splashing water from any direction up to a volume of 10 liters per minute. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. The micrometer’s knurled ratchet thimble mechanism helps provide uniform pressure during adjustment for precise, repeatable measurement for precise, repeatable measurement. A spindle lock helps provide secure locking of the measurement position. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Standard Gage manufactures precision measuring equipment and metrology hand tools, and is a product line by Hexagon Metrology. Standard Gage is headquartered in North Kingstown, RI.

Manufacturer: Starrett Brand: Starrett Model: T232RL

The Starrett 230FL series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a friction thimble mechanism for uniform pressure during adjustment. The vernier scale on the thimble and sleeve is graduated to 0.0001”. The micrometer is made of high-grade tool steel with a satin chrome rust- and glare-resistant finish. The spindle and anvil have micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Starrett Brand: Starrett Model: 210MAP

This Micrometer is ideal for quick comparisons of thread accuracy in screw cutting operations, measuring in small grooves or recesses where regular micrometers cannot be used, and for many other applications. It is 60 degree conical anvil and spindle faces with 0.4mm flat on the ends of the point. Quick and easy adjustment.

Manufacturer: Westward Brand: Westward

Outside Micrometer, Mechanical, Range 3-4 In./mm, Resolutions 0.0001 In./mm, Ratchet Thimble, Flat Anvil, Flat Spindle, Lock Nut Type Lever, Enamel Frame, Vernier Scale

Manufacturer: Grizzly Brand: Grizzly Model: T24346

These Micrometer Sets feature counters that read to 0.001", ratchet stop adjustment and lock nuts. Sets include micrometers, standards, adjusting wrench and wooden case.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 101-119CAL

The calibrated Mitutoyo 101-119CAL micrometer is for taking outside diameter measurements. The micrometer has a measurement range of 2.0" to 3.0", graduations of 0.0001" (0.001mm), and an accuracy of + or - 0.0001". This model has a vernier scale in inches for taking precise measurements. The micrometer's frame is tapered on the anvil side for taking measurements in hard-to-reach places. This model's measuring faces are flat and carbide-tipped for durability. Mitutoyo calibrated tools include a Certificate of Calibration that provides evidence that the tool has been calibrated and is within allowable error specifications. Mitutoyo calibrated tools are certified by Mitutoyo's American Association for Laboratory Accreditation-accredited calibration laboratory (A2LA Certificate #750-01) to the International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) 17025 International Standard for testing and calibration laboratories.This micrometer has a ratchet stop to help provide uniform pressure for precise, repeatable measurements. The satin-chrome finish on the frame helps resist rust and reduce glare. It comes with a standard bar and a fitted, plastic case.SpecificationsDisplay typeVernier scale in inchesAnvil/spindle styleFlat measuring faces, carbide tippedRange2.0" to 3.0"Graduation0.0001"Accuracy+ or - 0.0001"Flatness0.000024"Parallelism0.00008"Thimble styleRatchet stopDimensions6.73" length and 1.77" throat depthWeight410gMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interio...

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: 2312-4010

Range: 3-4"/75-100mm Resolution: 0.001mm.(0.00005") Accuracy: ±0.003mm mm/inch conversion. ABS/INC switchable. Reset/Pre-set. Hold function. Hold function for max. or min. values. Non-rotating spindle. Blade penetration = 0.315" Blade thickness = 0.03" Blade width = 0.256"

Manufacturer: INSIZE Brand: INSIZE Model: 3206-100A

Outside micrometer with interchangeable anvils, 0-100mm, graduation 0.01mm.

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: #AC21-1022-2022-3022

Battery used is button cell LR44 or SR44 (1.5V) •Large Display •Auto On and Off capabilities •Absolute, floating zero, and relative measurements -(you can zero out at any point) •Including Item Range Qty AC21-1022 0-25mm/0-1" 1 AC21-2022 25-50mm/1-2" 1 AC21-3022 50-75mm/2-3" 1

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 103-225

The Mitutoyo 103 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism for uniform pressure during adjustment. The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001”, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.