Micrometers - Page 167

Manufacturer: Starrett Brand: Starrett Model: 460A

The Starrett 460 series micrometer head has a vernier scale in inch units for taking precise measurements to 0.25”, and a plain stem for mounting in a fixture with a split-body clamp or setscrew. The vernier scale is graduated to 0.001” and has a satin chrome rust- and glare-resistant finish. The spindle is made of hardened steel to help provide durability, with a flat measuring face suitable for measurement or use as a stop, and is micro-lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Starrett Brand: Starrett Model: 436.1XRL-1

The Starrett 436.1 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, a tapered frame for measuring narrow slots and tight places, and a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements. The micrometer’s steel frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001” or 0.0001” depending on the model, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: EG00-3225

Easily adjusted for side movement of jaw

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-244-201-1

The Fowler 52-244-201-1 outside micrometer has a digit display with a secondary Vernier scale, a 0 to 1" measuring range, and a ball anvil and flat spindle pair for measuring the inside diameter of sleeves, collars, tubing, and other curved and cylindrical surfaces. The ball anvil contacts the inside curve at a single point, providing accurate measurements. The digit display has a 0.001" resolution and the secondary Vernier-scale has 0.0001" graduations for precise readings. An overall accuracy of 0.00016" provides accurate measurements. The flat spindle has a hardened and ground carbide measuring face to provide wear resistance. The hardened, ground, and lapped spindle thread provides smooth movement, accuracy, and long life. The positive locking nut on the spindle locks measurements in place for accurate readings and the zero adjustment on the sleeve ensures accurate measurements. The ratchet-stop thimble can be used independently of the friction thimble. It provides an audible sound and stops the spindle from turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The baked-enamel frame is heat-insulated to provide durability, long life, and resistance to temperature-related expansion and contraction. The micrometer includes a wrench and a fitted case. SpecificationsDisplay type Digit with Vernier scale Anvil/spindle style Ball anvil with flat spindle Measuring range 0 to 1" Graduation interval 0.001" on digit counter, 0.0001" on Vernier scale Accuracy 0.00016" Thimble style Ratchet stop Anvil/spindle diameter 0.256"Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micromet...

Manufacturer: Flexbar Brand: Flexbar

Digital Outside Micrometers & Sets. Accurate Readings to .0001" Meets or exceeds Federal Specifications for accuracy. Reads .001" on the Digital counter. .0001" Reading on the sleeve - Ratchet stop. Satin chrome Finish With Microfine Graduations. Frame is baked hammertone enamel. Carbide Measuring Faces. Positive locking nut on spindle. Models 18771 and up supplied With Standards. Complete With fitted Case. Model No. 18771, Digital Outside Micrometer, individual Model. Range: 1-2"

Manufacturer: INSIZE Brand: INSIZE Model: 7391-T3

BALL POINT, .079" dia, pair.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 150-218

The Mitutoyo 148 series middle-size micrometer head has a vernier scale in inch units for taking precise measurements to 1”. It is available with a plain stem for mounting in a fixture with a split-body clamp or setscrew, or a clamp-nut stem for quick mounting. The vernier scale is graduated to 0.001” or 0.0001” depending on the model, and has a satin chrome rust- and glare-resistant finish. The measuring face is lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe TESA interchangeable thread inserts for TESA AC series micrometers are an accessory for use with the Brown & Sharpe TESA Micromaster AC or Isomaster AC micrometer. The V-anvil and conical spindle tip pair have a 60-degree flank angle and are sized in metric units for measuring the pitch diameter of screw threads conforming to the International Organization for Standardization (ISO) metric thread standard. The thread inserts are made of hardened steel for durability.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: INSIZE Brand: INSIZE Model: 3229-7

Tubular inside micrometer, 6-7", graduation 001".

Manufacturer: MEDA - SUPERIOR IMPORT Brand: Meda - Superior Import

• Non-rotating spindle. • .0001" Graduation. • Laser engraved graduations. • Ratchet friction thimble. • Enamel frame.