Micrometers - Page 61

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 149-182

The Mitutoyo 149 series micrometer head has a small size and a vernier scale in inch units for taking precise measurements to 0.5”. It is available with a plain stem for mounting in a fixture with a split-body clamp or setscrew, or a clamp-nut stem for quick mounting. The vernier scale is graduated to 0.001”, and has a satin chrome rust- and glare-resistant finish. The measuring face is carbide-tipped for wear resistance and is lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Caleffi Brand: Caleffi

Caleffi Thermostatic Control Head with Built-in Sensor, 45-82 F Temperature Range, used with radiator valves. The Caleffi Thermostatic Control Head with Built-in Sensor is used to regulate the fluid flow to the radiator of a heating system. They are provided with a regulating element which automatically controls the opening of the valve to keep ambient temperature of the room where they are installed constant at the set value. This will prevent unwanted temperature rises and grants considerable energy savings. Features: Prevents unwanted temperature rises Considerable energy savings Quick, safe connection to the radiator without use of additional sealing materials

Manufacturer: INSIZE Brand: INSIZE Model: 7392-T8

MULTIFUNCTIONAL POINTS, knife-edge, pair.

Manufacturer: HHIP Brand: HHIP Model: 4500-0002

0-6" Depth Micrometer Set ~ 4" Base ~ 0.001" Graduation ~ Includes 6 rods. ~ Interchangeable rods are fitted to the micrometer spindle against a positive stop and locked. ~ Base surface hardened & lapped. ~ Ratchet stop for consistent and repetitive measurements. ~ SaTiN chrome non~glare finish. ~ Complete with fitted case and spanner wrench.

Manufacturer: Supco Brand: Supco

**SmartTester Instrument NOT INCLUDED** Includes: UTEC cable, smart card, flow chart, soft carry case. For use with UTEC 11 pin boards, these boards are found in many Carrier, Bryant, ICP, Arcoaire, Comfortmaker, Heil, Tempstar, & Keep Rite equipment.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 148-362

The Mitutoyo 148 series large micrometer head has a vernier scale in inch units for taking precise measurements, and a large-diameter thimble for ease of reading. The micrometer head is available with a standard spindle pitch of 0.5”, or with a 0.25” spindle pitch for slow head travel to help provide fine positioning. It is available with a plain stem for mounting in a fixture with a split-body clamp or setscrew, or a clamp-nut stem for quick mounting. The vernier scale is graduated to 0.001”, and has a satin chrome rust- and glare-resistant finish. The flat measuring face is suitable for measurement or use as a stop, and is lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 148-312

The Mitutoyo 148 series large micrometer head has a vernier scale in metric units for taking precise measurements, and a large-diameter thimble for ease of reading. The micrometer head is available with a standard spindle pitch of 13mm, or with a 6.5mm spindle pitch for slow head travel to help provide fine positioning. It is available with a plain stem for mounting in a fixture with a split-body clamp or setscrew, or a clamp-nut stem for quick mounting. The vernier scale is graduated to 0.01mm, and has a satin chrome rust- and glare-resistant finish. The flat measuring face is suitable for measurement or use as a stop, and is lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Starrett Brand: Starrett Model: 460MA

The Starrett 460M series micrometer head has a vernier scale in metric units for taking precise measurements to 6.5mm, and a plain stem for mounting in a fixture with a split-body clamp or setscrew. The vernier scale is graduated to 0.01mm and has a satin chrome rust- and glare-resistant finish. The spindle is made of hardened steel to help provide durability, with a flat measuring face suitable for measurement or use as a stop, and is micro-lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 103-260

Mitutoyo Outside Micrometer, Range: 0 - 1", Graduations: .0001", Thimble: Ratchet, Standard: No, Comment: Tapered frame on anvil side

Manufacturer: Starrett Brand: Starrett Model: T444.1XRL-1

Outside Micrometer .0001" Grad, 0-1" Range, Ratchet Stop, Lock Nut, Carbide Faces. The Starrett have heat-insulators on the frame to help reduce temperature-related expansion or contraction. The Vernier scale on the thimble and sleeve is graduated to 0.001", with a satin chrome rust and glare-resistant finish on the thimble. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement.