Micrometers - Page 69

Manufacturer: Starrett Brand: Starrett Model: 256RL-1

The Starrett 256RL series Disc-Type micrometer has disc-shaped faces with flanges for measuring the distance between gear teeth, a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism for uniform pressure during adjustment. The vernier scale on the thimble and sleeve is graduated to 0.001”. The micrometer has a tapered frame for measuring narrow slots and tight spaces, and is made of high-grade tool steel with a satin chrome finish that helps resist rust and reduce glare. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-243-012-1

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 342-271

Battery life approximate 1.2 years under normal use for digital models. The function of Digital Model are Origin-set, zero / ABS, data hold, data output, inch/mm conversion. Alarm for low voltage, counting value composition error.

Manufacturer: INSIZE Brand: INSIZE Model: 3520-75E

Electronic inside micrometer, 2-3"/50-75mm.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 342-371

Mitutoyo IP65 Digimatic Crimp Height Micrometer, Range: 0 - .8", Resolution: .00005"/0.001mm, Thimble: Ratchet, Output: Yes, Standard: No, Functions: Origin-set, Zero / ABS, Hold, Auto power on/off, Data output, inch/mm conversion, Comment: Point Spindle

Manufacturer: Starrett Brand: Starrett Model: 823DZ

Highly useful for internal linear measurements such as measuring cylinders, rings, setting calipers and parallel surfaces.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 339-302

The Mitutoyo 339 series Digimatic tubular LCD inside micrometer includes a set of hollow, tubular extension pipes to help provide light weight with rigidity and balance shoulderswhen measuring inside dimensions of cylinders, rings, and parallel surfaces. It has a single-value LCD readout that displays in metric units with resolution to 0.001mm, and Statistical Process Control (SPC) data output to transmit results to a computer or external device. The output jack transmits SPC results to a computer through an interface cable (sold separately).The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. The electronics housing has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The measuring faces are carbide-tipped for wear resistance. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a wooden case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1...

Manufacturer: INSIZE Brand: INSIZE Model: 3227-E16

Three points internal micrometer, 1.2-1.6", graduation 0002".

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe Intrimik analog vernier inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a vernier scale in inch units for taking precise inside dimension (ID) measurements.The micrometer is made of high-grade tool steel with a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.0005”. A knurled friction thimble helps provide quick adjustment capability. The measuring faces are tungsten carbide-tipped for wear resistance. The micrometer includes a 6” extension, and comes with a wooden case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: Mitutoyo Brand: Mitutoyo

FeaturesHardened and ground anvils.Convenient handle for deep hole use.Satin chrome finish.Every rod marked with length.Well balanced with positive permanent adjustment.