Micrometers - Page 62

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 148-242

The Mitutoyo 148 series fine spindle feeding micrometer head has a vernier scale in metric units for taking precise measurements and spindle travel of 0.1mm per revolution for fine adjustment. It is available with a plain stem for mounting in a fixture with a split-body clamp or setscrew, or a clamp-nut stem for quick mounting. The vernier scale is graduated to 0.01mm, and has a satin chrome rust- and glare-resistant finish. The spherical measuring face is lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Starrett Brand: Starrett Model: V463MRL

The reading surfaces are satin finished stainless steel for easy readability.

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: EG00-3226

Satin-chrome finish •Hardened & ground faces •Easily adjusted for side movement of jaw

Manufacturer: Starrett Brand: Starrett Model: 234MA-475

Starrett 234MA-475 End Measuring Rod with Insulated Handle and Spherical Ends, 475mm Length. Starrett 234 End Measuring Rods or “standards” are for checking and setting micrometers of 2" capacity and larger, and are also used on machine tools for comparing gages, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. They are made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius.

Manufacturer: INSIZE Brand: INSIZE Model: 3222-25

Tubular inside micrometer, 2-2.5", graduation 001".

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-870-002-0

The Fowler 54-870 series digital outside micrometer has a flat anvil/spindle pair, a choice of measuring range, an LCD with an inch/metric switchable resolution, and is designed for general purpose measuring. A switchable resolution of 0.00005" and 0.001mm, and an accuracy of 0.00016"/0.004mm provide precise readings and accurate measurements. Carbide measuring faces provide long life and wear resistance. A ratchet thimble applies consistent force for repeatability between users. A jet back and grey enamel finish provide durability and wear resistance. The LCD has a hold feature that saves the reading for recording. The micrometer can be set to take absolute or incremental measurements. Absolute measurements provide the total dimension of the workpiece. Incremental measurements provide a reading that shows the difference between a set standard and workpiece being measured. This type of reading is often used to determine if a workpiece falls within tolerance levels. An automatic shut-off feature extends battery life. RS-232 output transfers data to a computer (cable not included). The micrometer requires a CR2032 battery (included), and includes a fitted case. SpecificationsDisplay typeLCDAnvil/spindle styleFlatMeasuring rangeVariesResolution0.00005"/0.001mmAccuracy0.00016"/0.004mmThimble styleRatchetData outputRS-232PowerCR2032Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The Fred V...

Manufacturer: Mahr Federal Brand: Mahr Federal Model: 4102410

The new flexible MarConnect USB ready interface from Mahr. Simplifies both data transmission to a PC and enables quick and universal assembly of a multiple measuring station. Our new digital hand measuring instruments have a MarConnect interface. Regardless of which interface standard you use, whether USB, Opto RS232 or Digimatic, MarConnect will always provide you with the optimal connection. Mahr Federal 16 EXR Data Connection Cable-OPTO RS232 SUB-D JACK 9-PIN.

Manufacturer: INSIZE Brand: INSIZE Model: 3233-1B

Spline micrometer, 0-1", graduation 0001" Type b.

Manufacturer: ASIMETO Brand: ASIMETO Model: 203-02-1

Standard, Inside Micrometers, ASIMETO

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 152-102

The Mitutoyo 152 series quick spindle feeding micrometer head has a vernier scale in metric units for taking precise measurements and spindle travel of 1mm per revolution for quick adjustment. It is available with a plain stem for mounting in a fixture with a split-body clamp or setscrew, or a clamp-nut stem for quick mounting. The vernier scale is graduated to 0.01mm, and has a satin chrome rust- and glare-resistant finish. The flat measuring face is carbide-tipped for wear resistance and is lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.