Micrometers - Page 174

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 293-333-30

MIC, Digimatic, 3-4", with SPC Output, IP65.

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: 3151-0071

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 145-188

The 145 series vernier inside micrometer has caliper-type jaws and a vernier scale in metric units for making precise inside dimension (ID) measurements. The micrometer is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The measuring faces are carbide-tipped for wear resistance. The vernier scale is graduated to 0.01mm. A locking clamp helps hold measurements in place. The micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 126-800

Mitutoyo Screw Thread Micrometer Anvil and Spindle Tips, For Series: 126 and 326, Range: 3.5-4.5, 5-8, 9-13, 14-24, 28-44, 48-64 TPI / 0.4-0.5mm, 0.6-0.9mm, 1-1.75mm, 2-3mm, 3.5-5mm, 5.5-7mm, Thread Angle: 60 degrees.

Manufacturer: INSIZE Brand: INSIZE Model: 3227-E035

Three points internal micrometer, 275- 35 inch graduation 0001 inch.

Manufacturer: Starrett Brand: Starrett

Tubular Inside Micrometer, Range 1 1/2 to 8 In./mm, Resolutions 0.001 In./mm, None Thimble, Movement of Screw 1/2 In., Number of Measuring Rods 5, Number of Gauges None, Rod Dia. 3/8 In., Rod Type Tubular Inside MicrometersAs a 2 point contact tool, use for measuring taper, out of round, bell mouth, and barrel. Positive-locking nut. Coiled, spring-pressure, contact-type rods are marked with appropriate lengths. Include adjustment wrenches and storage case.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe TESA IMICRO Capa LCD inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a digital single-value LCD readout that displays in inch and metric units with resolution to 0.00005” (0.001mm). An electrostatic capacitance linear encoder helps ensure repeatable, precise measurement, and Statistical Process Control (SPC) data output to transmit results to a computer or external device through an interface cable (sold separately).The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. An automatic off function helps preserve battery life when the unit is not in use. The electronics housing has an Ingress Protection 54 (IP54) rating, which means that components are resistant to debris and to splashing water from any direction up to a volume of 10 liters per minute. The measuring faces are made of hardened steel and may be uncoated, TiN-coated, or tungsten carbide-tipped for wear resistance, depending on the model. The micrometer includes, and is powered by, a single CR2032 lithium cell battery, and comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, fo...

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

Self-centring and self-aligning internal micrometers. The high-precision thread machined into the measuring cone, combined with the measuring bolts specially arranged to provide 3-line contact, make them the only micrometers in the world that respect the ABBE principle. Measure depth, reliably.

Manufacturer: Thomas Scientific Brand: Mitutoyo Model: 264-504-5A

This printer offers excellent functionality. You can use it not only to print measurement data, perform a variety of statistical analyses, and draw a histogram or D chart but also to perform complicated operations for X-R control chart.

Manufacturer: Tlegend Instrument® Brand: Tlegend Instrument Model: 335-04-920

The product usually takes 7--13 business days to arrive to your hand after your order is confirmed Product Description Measurement can be taken closer to the bottom Measurement can be taken closer to the bottom hole with an extension rod Highly durable because of carbide-tipped contact points Ratchet stop Technical Datas Protection level IP54 Type:12-16mm*0.001mm Accuracy: 0.004mm NOTE: we will send the product to you as soon as possible If you have any questions , please feel free to contact us