Micrometers - Page 19

Manufacturer: Starrett Brand: Starrett Model: 443Z-3RL

The Starrett 443 Vernier Depth Gauges with Half Base, Micrometer Type, Inch, depending on the model, have a measurement range of 0 to 3", 0 to 6", or 0 to 9" ; a resolution (or smallest graduation interval) of 0.001", with + or – 0.0001" of accuracy. The vernier scale enables precise measurements in fine units. These gauges include 5/32" diameter measuring rods to cover the intended range. These units have two-inch long half bases that enable measurements of depressions close to shoulders and between obstructions. The bases and all measuring surfaces are hardened, ground, and lapped for accuracy. These gauges have a ring-type knurled lock nut and a combination ratchet and speeder to stabilize the gauge for precise measurements. These units include a protective case. Depth gauges are typically used in manufacturing, machining, and mechanical engineering. Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-246-002-1

The Fowler 52-246 series outside micrometer has a blade-style anvil/spindle pair with a choice of measuring range and 0.0001" graduations and is designed to measure groove diameters of shafts and workpieces with narrow or recessed features. The Vernier scale has 0.0001" graduations and an accuracy of 0.0002" for precise readings and accurate measurements. A zero adjustment on the sleeve ensures accurate measurements. The blade has a 0.030" thickness, a 0.256" width, and a 0.315" penetration for measuring narrow grooves and hard-to-reach areas, and a non-rotating spindle keeps workpieces stable during measurements. The hardened, ground, and lapped spindle thread provides smooth movement, accuracy, and long life. The ratchet-stop thimble can be used independently of the friction thimble. It provides an audible sound and stops the spindle from turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. A satin chrome finish on the thimble and sleeve helps reduce rust and glare, providing durability and long life, and microfine graduations help ensure accurate readings. The baked-enamel frame is heat-insulated to provide durability, long life, and resistance to temperature-related expansion and contraction. The micrometer includes a wrench and a fitted case. Micrometers 2" and above include a standard. SpecificationsDisplay type Vernier scale Anvil/spindle style Blade Measuring range Varies Graduation interval 0.0001" Accuracy 0.0001" Thimble style Ratchet Blade thickness 0.030" Blade width 0.256" Blade penetration 0.315"Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer ca...

Manufacturer: Starrett Brand: Starrett Model: V232MXRL

The Starrett 230MXRL series outside micrometer has a vernier scale in metric units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism for uniform pressure during adjustment. The vernier scale on the thimble and sleeve is graduated to 0.001mm. The micrometer is made of high-grade tool steel with a satin chrome rust- and glare-resistant finish. The spindle and anvil have micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 141-206

The Mitutoyo 141 series vernier inside micrometer includes a set of interchangeable rods for a diversified range of measurement, and has a vernier scale in metric units for making precise measurements. The micrometer and rods have a satin chrome rust- and glare-resistant finish. The measuring faces are hardened steel for durability. The vernier scale is graduated to 0.01mm. A locking clamp helps hold measurements in place. The micrometer and accessories come with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: ABS Import Tools Brand: HHIP

INCH/METRIC .00005" GRADUATION | REPLACEMENT BATTERY (ITEM #4102-0030) | Non-rotation spindle | 60°V-shaped and knife-edged anvils | With cable for RS232 output. | Ratchet stop. | With fitted case. | Direct RS232 output.

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4200-0361

HHIP electronic screw thread micrometer features non-rotation spindle 60 degree V-shaped and knife-edged anvils with cable for RS232 output. Ratchet stop. With fitted case. Direct RS232 output. Product specifications: range: 0-1"; anvils: #1-5.

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: 0906-1006

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 295-314

The Mitutoyo 295 series tube micrometer has a vertical anvil for measuring tubing wall thickness, and a mechanical digit counter for ease of reading to 0.01mm. It also has a vernier scale in metric units for taking precise outside diameter (OD) measurements and a ratchet-stop mechanism for uniform pressure during adjustment. The anvil type may be pin, spherical, or cylindrical, depending on the model. The micrometer’s frame has a baked enamel finish for protection and durability. The spindle and anvil are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Starrett Brand: Starrett Model: 436.1MRL-125

The Starrett 436.1 series outside micrometer has a vernier scale in metric units for taking precise outside diameter (OD) measurements, a tapered frame for measuring narrow slots and tight places, and a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements. The micrometer’s steel frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.01mm, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped steel measuring faces for accuracy. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Starrett Brand: Starrett Model: 124BZ

Highly useful for internal linear measurements such as measuring cylinders, rings, setting calipers and parallel surfaces.