|
|
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $262.80 14% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 443Z-6RL
Manufacturer: Starrett
Brand: Starrett
Model: 443Z-6RL
|
The Starrett 443 Vernier Depth Gauges with Half Base, Micrometer Type, Inch, depending on the model, have a measurement range of 0 to 3", 0 to 6", or 0 to 9" ; a resolution (or smallest graduation interval) of 0.001", with + or – 0.0001" of accuracy. The vernier scale enables precise measurements in fine units. These gauges include 5/32" diameter measuring rods to cover the intended range. These units have two-inch long half bases that enable measurements of depressions close to shoulders and between obstructions. The bases and all measuring surfaces are hardened, ground, and lapped for accuracy. These gauges have a ring-type knurled lock nut and a combination ratchet and speeder to stabilize the gauge for precise measurements. These units include a protective case. Depth gauges are typically used in manufacturing, machining, and mechanical engineering. Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA.
-
5.0 of 5.0 with 4 Reviews
SALE PRICE: $266.33 9% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 103-147-10
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 103-147-10
|
The Mitutoyo 103 series outside micrometer has a vernier scale in metric units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism for uniform pressure during adjustment. The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.01mm, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $274.00 1% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 220XFL-1
Manufacturer: Starrett
Brand: Starrett
Model: 220XFL-1
|
The Starrett 220XFL series Mul-T-Anvil micrometer uses interchangeable anvils to support varied measurement needs, and includes a flat and rod anvil. It has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a friction thimble mechanism for uniform pressure during adjustment. The vernier scale on the thimble and sleeve is graduated to 0.001â€. The micrometer is made of high-grade tool steel with a satin chrome rust- and glare-resistant finish. The spindle is micro-lapped for accuracy and carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $275.00 12% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 293-187
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 293-187
|
The Mitutoyo 293 series QuantuMike Coolant Proof LCD micrometer has a digital single-value LCD readout that displays in inch and metric units with resolution to 0.00005†(0.001mm) for outside diameter (OD) measurement. A ratchet thimble mechanism helps provide uniform pressure for precise, repeatable measurement. It also has a non-rotating spindle that helps provide steady positioning during measurement, and a QuantuMike spindle that feeds at a rate of 0.08†(2mm) per revolution for a higher rate of productivity than a conventional mechanism. It uses the Mitutoyo ABSOLUTE electrostatic capacitance linear encoder to help prevent overspeed errors and help ensure repeatable, precise measurement.The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. Depending on the model, an output jack transmits Statistical Process Control (SPC) data results to a computer or external device through an interface cable (sold separately). The micrometer has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diam...
-
5.0 of 5.0 with 4 Reviews
SALE PRICE: $276.24 7% OFF
Manufacturer: STAKF
Brand: Starrett
Model: 449AZ-3R
Manufacturer: STAKF
Brand: Starrett
Model: 449AZ-3R
|
The Starrett 449 Vernier Depth Gauges, Micrometer Type, Inch, depending on the model, have a measurement range of 0 to 3" or 0 to 6", a resolution (or smallest graduation interval) of 0.001", with + or – 0.0001" of accuracy. The vernier scale enables precise measurements in fine units. The gauges in this series have non-rotating blades, or flattened probes, that are 1/64" wide by 1/8" long, and can be used to measure narrow recessions without the blade slipping off of a surface. These units include measuring rods to cover the intended range. They come with a ratchet and speeder to enable the users to apply uniform pressure and make quick adjustments for precise measurements. Depending on the model, the bases are either 2.5" or 4" long and all measuring surfaces of these units are hardened, ground, and lapped for durability and data accuracy. These units include a protective case. Depth gauges are typically used in manufacturing, machining, and mechanical engineering. Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $277.83 19% OFF
Manufacturer: False
Brand: Mitutoyo
Model: 293-347-30
Manufacturer: False
Brand: Mitutoyo
Model: 293-347-30
Digimatic Micrometer, 3"-4", IP65.
-
5.0 of 5.0 with 6 Reviews
SALE PRICE: $278.63
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 293-186
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 293-186
Mitutoyo IP65 QuantuMike Outside Micrometer, Range: 1 - 2", Resolution: .00005"/0.001mm, Thimble: Ratchet Thimble, Output: No, Standard: Yes, Functions: Origin-set, Zero / ABS, Hold, Auto power on/off, Data output, inch/mm conversion, Alarm: Low voltage
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $279.00
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Model: 71.115899
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Model: 71.115899
|
The Brown & Sharpe TESA Etalon 260 standard outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, a friction drive thimble mechanism for uniform pressure during adjustment, and tungsten carbide faces for wear resistance.The micrometer’s frame is heat-insulated to help reduce temperature-related expansion or contraction. The vernier scale on the thimble and sleeve is graduated to 0.0001â€, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $282.50 19% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 122-135
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 122-135
|
The Mitutoyo 122 series blade micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a blade anvil and spindle for measurement of groove diameter of shafts and keyways. The spindle does not rotate during adjustment, to help provide steady positioning for measurement.The micrometer’s frame is made of high-grade tool steel for durability. The vernier scale on the thimble and sleeve is graduated to 0.0001â€, and has a satin chrome rust- and glare-resistant finish. The spindle and anvils are made of hardened steel for durability. Micrometers that measure greater than 1†come with a standard bar for zero-setting. The unit comes with a fitted plastic case for storage. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $284.99 6% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 293-181
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 293-181
|
The Mitutoyo 293 series QuantuMike Coolant Proof LCD micrometer has a digital single-value LCD readout that displays in inch and metric units with resolution to 0.00005†(0.001mm) for outside diameter (OD) measurement. A ratchet thimble mechanism helps provide uniform pressure for precise, repeatable measurement. It also has a non-rotating spindle that helps provide steady positioning during measurement, and a QuantuMike spindle that feeds at a rate of 0.08†(2mm) per revolution for a higher rate of productivity than a conventional mechanism. It uses the Mitutoyo ABSOLUTE electrostatic capacitance linear encoder to help prevent overspeed errors and help ensure repeatable, precise measurement.The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. Depending on the model, an output jack transmits Statistical Process Control (SPC) data results to a computer or external device through an interface cable (sold separately). The micrometer has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diam...
|
|